Centrifugal pumps

Flow: 7 l/min
Pressure: 30 psi

The B-Series Dia-Vac® pump is the smallest pump offered by ADI providing exceptional quality, reliability and affordability. Available with general purpose shaded pole or brush/ brushless DC motor options. ...

Flow: 0 m³/h - 75 m³/h
Head: 0 m - 48 m

Dewatering, mud, marine, effluent, hôtel, loading & transfer of oils, spirits, swimming pools, gas oils, engine cooling. Vessels, industrial pumping petroleum products, chemical Civil constructiondewatering foundations, trenches and pits. Filter ...

Flow: 6,500 l/min
Head: 70 m
Power: 0 kW - 60 kW

ELBA – THE PERFECT COMBINATION The ELBA pump series consists is made up by combining a gearbox and a centrifugal pump. The ELBA group is utilized for farm lands irrigation, sewage spreading ...

The Bigas Alsina, S.A. blood pumps, are designed to allow the transport of this waste material in an efficient way, avoiding all those problems that ussualy arise inside the pumps, due in most cases because ...

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used ...

Flow: 0 m³/h - 3,500 m³/h
Head: 0 m - 105 m

... priming centrifugal pump that is suitable in applications such as clean water, seawater, brines and alkaline liquids in water supply, dust extracting and spray-coating plants, etc, in thermal range of ...

Flow: 28 l/min - 148 l/min
Head: 15 m - 17 m

The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, made of brass CB754S with DC motor ...

Flow: 3,000 m³/h

The EN 733 MU Series of End-Suction Centrifugal Pump, manufactured by Pompe Garbarino S.p.A., is specifically designed for fresh and sea water, condensate, oils, chemical and petrochemical products. It ...

Flow: 0 us gal/min - 210 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 125'00"

... is not recommended.They operate with HT6 and HT7 power units or different source that can deliver flows to 5 GPM. The pumps are small in size, and can be bolted directly into a pipeline.

Flow: 2.5 m³/h - 100 m³/h
Head: 80 m
Power: 750 W - 45,000 W

... SOLID MECHANICAL EQUIPMENT CO.,LTD provides good quality fluorine plastic lined centrifugal chemical pump. IHF single stage end suction fluorine plastic lining centrifugal pump ...

Flow: 50 l/min
Head: 60 m

Flow: 0 l/min - 1,000 l/min
Pressure: 0 Pa - 276,000 Pa
Power: 750 W - 5,000 W

Characteristics Compact structure, easy installation and maintenance, low noise, smooth operation, long service life. Built-in check valve, switching valve, safety valve(relief valve) and vacuum valve. ...

Flow: 1,260 m³/h - 2,772 m³/h
Head: 13 m - 63 m
Power: 0 kW - 560 kW

The EHM Series consists of slurry pumps. These pumps can be employed in mining, coal, metallurgical and construction material fields applications. They are well suited for handling minimized corrosive ...

Flow: 24,800 l/h
Head: 10 m
Power: 0.5 ch

Flow: 1.5 l/s - 1,500 l/s
Head: 3 m - 90 m
Power: 0.75 kW - 900 kW

... DescriptionPipe-mounted UL 778 pumping unit with integrated intelligent controls for space-saving installation and superior energy performance. Saves up to 75% in energy over comparable traditional constant speed or variable ...

Flow: 85 l/min
Pressure: 0 bar - 2.4 bar
Power: 480 W - 768 W

Features 12V DC or 24V DC electric pumps consisting of a solid and robust permanent magnet motor which can ensure high reliability even when used at low temperatures. Self-priming vane pump consisting ...

Flow: 80 m³/h

DESCRIPTION Advanced OHV, reliable performance, easy start Forged light and strong aluminium alloy Forged iron volute impeller High quality ceramic plunger, silicon carbide water seal Low oil consumption, low noise Suitable for ...

Flow: 1,000 l/min
Pressure: 17, 10 bar
Fluid temperature: -15 °C - 72 °C

... unparalleled performance in the segment of fire pumps developed through research and development studies, where competition is at the highest level with its modern lines. Product Features Low pressure pump Compatible ...

Flow: 40 l/min - 86 l/min
Head: 10 m - 30 m
Power: 370 W - 1,500 W

... Working principle & Construction BESM pump is blades pump which construction between water ring pump and peripheral pump. So it can get better in both self-priming ...

Pressure: 0 bar - 4,137 bar

KMT Waterjet Ultra High Pressure pump series 3800 bar STREAMLINE SL-VI STD KMT Waterjet Ultra High-Pressure entry-level pump 3800 bar For application which do not require a maximum pressure of 4,137 ...

Flow: 45 m³/h - 320 m³/h
Head: 25 m - 35 m
Power: 11 kW - 75 kW

Centrifugal pump for drilling mud system,oilfield and HDD drilling fluids centrifugal pump China manufacturer.GN supply centrifugal pump ...

Flow: 0 l/min - 12 l/min
Head: 0 m - 50 m
Power: 0.12 kW

... Temperature control in laboratory applications Advantages Suitable for the delivery of gas shares High pressures with compact design

Flow: 280, 440, 1.2, 125 m³/h
Head: 670, 660 m
Power: 0.5 ch - 335 ch

... submersible water pump is in high demand due to its innovative mechanical design and impeccable quality. It has carved a niche as the most predominant submersible pump and the company is one of the leading ...

Flow: 180 us gal/h - 550 us gal/h
Power: 0.5, 0.1 ch

... Spaces.” Hartell’s PlenumPlus Condensate Pumps are the only plenum condensate pumps on the market that meet this standard. When safety counts, you can depend on PlenumPlus Commercial Grade Series of ...

Flow: 0.5 m³/h - 200 m³/h
Pressure: 1 MPa
Height: 7 m

... self-priming pump It adopts working principle of outer mixed self-priming pump Detail 　　Design features 　　◎Design conforms to DIN24256/ISO2858 standard 　　◎It adopts working principle of outer mixed self-priming ...