Operating temperature: -50 °C - 250 °C
... Metal Waterproof Push Pull Self-locking Connector 1.Secure high performance push pull self-locking system 2.Sealed up to IP68 and hermetic 3.3 codes alignment key and polarized keying system to avoid cross-interface 4.360° EMC shielded 5.High ...
Shenzhen Raymo Electronics Technology Limited
Primary current: 3 A
Voltage: 60 V
Operating temperature: -25 °C - 70 °C
... This male panel mount connector with snap-in locking system and a pin count of 3 is according to its protection class IP40 protected against solid foreign bodies and against access with a wire. No protection against water. It can be used ...
binder USA
Operating temperature: -40 °C - 75 °C
... standard connectors RJ-style push-pull housing One-piece design •Polarized Pull-proof for jumper PC finish Anti-snag latch for jumper and BTW Standards compliant Removable clips for both simplex and duplex connectors Pre-radiused ...
... True 75 ohm impedance. • Gold plated beryllium copper center contact. • Flush-mount receptacle prevents damage on the jack. • Redesigned for 12G-SDI to minimize return loss. • Return Loss: 26.4 dB @ 12 GHz, 15 dB @ 12 GHz • Return Loss: 26.4 ...
CANARE Electric
... . A range of easy-to-mount coaxial and jack connectors makes the system extremely fl exible for use in a wide range of applications. The required polarity can be achieved by reversing the secondary connector. Custom cables ...
Primary current: 3 A
Voltage: 150 V
... Product information "COB connector Ø 35 mm for LED array 19 x 19 mm" With integrated COB holder and interface for reflectors 47.935 Easy pre-assembly of LED Screw mounting: for screws M3 and locking washer Max. torque for screw fixing ...
BjB
Primary current: 5.5, 5.1, 1.7, 16 A
Pitch: 0.8 mm
Data rate: 16 Gb/s
... • 12 pins • unmated stacking height: 1.15 mm • EMC shielding • SMT • Performance level 1 Performance Level IEC 60512-9-1:2010 - 1 No. of Contacts - 12 Board-to-Board Distance - 6.0 mm to 13.5 mm Insulator Material - LCP, UL 94 V-0 CTI value IEC ...
ept
... APC, ST/PC, and LC/PC Connectors Available Bare Fiber Terminator for Temporary Terminations Dust Caps Protect Fiber Tips Thorlabs stocks an extensive selection of single mode fiber optic connectors. Our single mode fiber ...
Thorlabs
... Fibre optic SC-SOC connectors Q-Fiber is an innovative solution created for the needs of FTTX. Thanks to its small size (39mm) connector SC-SOC can be use as “no length” pigtail allowing direct terminationof customers ...
... Plastic or ceramic connectors with pins made with thermocouple alloy (E, J, K, N and T type), compensation alloy (for R, S, B, W3 and W5 type thermocouples) or copper for RTD, standard or miniature. Especial connector ...
... than the alternative of mating a large array of standard coax connectors. These SSBP coax contacts were designed to fit into standard off-the-shelf MIL-DLT-38999 and MIL-DTL-24308 D-Sub connectors and are interchangeable ...
Microwave Product Divison
Impedance: 75 Ohm
Operating temperature: -65 °C - 165 °C
... is brass or stainless steel. The N type connector are designed to satisfy the need for a durable, weatherproof, medium-size RF connector, frequency max up to 1GHz; this Type N female Coaxial connector ...
ROHO CONNECTOR LIMITED
... SEC Quick connection for IBC containers or drums ...
Primary current: 25 A
Fepa 25A bipolar sockets are useful for connecting to heaters attached on extrusion lines. They are available in a working temperature range of 100°C to 200°C. Some sockets can handle maximum 300°C short peaks. Shielding is available as aluminum or rubber. ...
Impedance: 50 Ohm
Voltage: 170, 500 V
... Description: MMCX are RF connectors and their frequency are up to 6GHz, impedance 50 ohm, The series connectors are widely applied to surface installation, technique besides flexible and semi-rigid cables, MMCX series ...
Primary current: 0.5 A
Voltage: 30 V
Pitch: 0.8 mm
... Compliant with SFF 8086 Mini Multilane 4X 10 Gb/s Common Elements Connector Compliant with SFF 8088 Mini Multilane 4X Shielded Connector Shell and Plug Meet SAS Rev 1.1 & SAS Rev 2.1 Application Data ...
JPC Connectivity
Primary current: 0.5 A
Voltage: 50, 500 V
Operating temperature: -25 °C - 85 °C
... Mating: Packing:Reel Delivery time:7~15 Day UL:Yes ROHS Compliant Contact resistance: 20mΩ max Insulation resistance: 800mΩ min Contact material: phosphor bronze Contact plating: tin plating over Ni Insulator material: LCP ...
Dongguan Lianda Precision Products Co. Ltd
Primary current: 5 A
Voltage: 14 V
Pitch: 2.54 mm
... Application - Automotive Connector - Wire to wire Smt - no Insulation resistance - 100 MOhms min. Number of circuits - 2 to 22 Applicable wire - AWG #22 to #18 Compliant with rohs 0.64 unsealed connector series ...
J.S.T. FRANCE S.A.S
Primary current: 9 A
Voltage: 300 V
Pitch: 7.62 mm
... Number of poles: 2, Spring tightening, 9A, 1.5mm², 14AWG, 300V, Pitch 7,62 mm, Flanges, Wiring mode Right, Green (RAL 6032), Soldering technology Not applicable, UL, CUL, IEC Stripping length11.5 mm Operating temperature range-40°C ÷ 105°C Contact ...
Primary current: 10 A
Voltage: 230, 400, 4 V
Operating temperature: -40 °C - 125 °C
... Number of contacts - 3+PE - Rated current - 10A - Rated voltage conductor-ground - 230V - Rated voltage conductor-conductor - 400V - Rated impulse voltage - 4KV - Pollution degree - 3 - or - 10A 250V 4kV 3 Rated voltage ...
Xiamen Wain Electrical Co. Ltd.
Impedance: 50 Ohm
Voltage: 1,500, 1,000 V
Operating temperature: -45 °C - 125 °C
... Micro RF Coaxial Connectors are one kind of screw-coupling middle-power coaxial connector up to 11GHZ and some versions can be extended to 18GHZ. Micro RF Coaxial Connectors have great performance of ...
Danyang Teruilai Electronics Co., Ltd.
Primary current: 500 mA
... design and the use of a ceramic PCB guarantees an extremely low attenuation with very good RF matching. The corresponding connector is included and will be deliverd together with the product. Frequency range - 10 - 6000 MHz Insertion ...
SSB-Electronic GmbH
Primary current: 1 A
Voltage: 60 V
Operating temperature: -20 °C - 80 °C
... M5 circular connector is specially developed for the miniature sensor market and any application that requires multiple sensors within a very small area. The product line offers 3 and 4 Pins cable cord-sets and a range of panel-mounted ...
Cableforce Electronics Co., Limited
Primary current: 3, 5 A
Voltage: 50 V
Operating temperature: -40 °C - 80 °C
... Standard 3A current rating PD 5A current rating option Improved internal and external RFI performance One connector with power charging, data transfer, DP video and audio capability Top mount, mid mount and docking ...
Shenzhen Himatch Electronics Co., Ltd
Primary current: 16 A
Voltage: 600, 1,500 V
Pitch: 5.08 mm
... Socket connectors, Power Connector 5,08 mm Pincount - 4, 8 Gender - Female Polarising - yes Material contact - Copper alloy Plating contact - Sn Material insulator - High temp. thermoplast UL94V-0 Max. processing ...
MPE-GARRY
Operating temperature: -20 °C - 80 °C
... N Material: connector ferrule - Zirkonia ceramic Material: adaptor split sleeve - Zirkonia ceramic or phosphor bronze Material: connector body, fixing parts for adaptor - brass, nickel-plated Material: bayonet coupling ...
TELEGARTNER
Primary current: 0.5 A
Voltage: 30 V
Pitch: 0.8 mm
... Designs are based on the industry standard SFP Multi-Source Agreement (MSA).The SFP board mount connector is 20 position and 0.8mm pitch.High Speed Contact Design.High temp and IR reflow compatible versions are available. Insulator:High ...
Nextronics Engineering Corp.
Primary current: 10, 16 A
Voltage: 250, 500 V
... The connectors we provide in suport of wide ariety of hot runner connectors. They are mostly used for Hot Runner Manifold, Robot Interface, Power and Thermocouple connections for Plastics. All power connectors ...
... fiber optic connector Product specifications Product: SC fast fiber optic connector Insertion loss: ≤0.3dB Return loss: ≥50dB(UPC); ≥60dB(APC) Cable diameter: 2.0mm, 3.0mm, 3.1x2.0mm drop cable Product details Optical ...
Shenzhen YHT Broadband Equipment Co., Ltd.
... MXC® CONNECTOR Neptec is a qualified distributor of MXC® optical fiber connector by US Conec which offers ultra high fiber count of up to 64 micro lenses within 4 rows, each row containing 16 lenses. The main component ...
... 10-pin insulation displacement female connectors (IDC) on both ends of a 10-wire flat 28 AWG ribbon cable. Primarily used with Avago / Agilent direct replacements. ...
US Digital
Pitch: 0.1, 0.05 mm
... Description Elastomeric connector to connect your components into your electronic setup. Used by pressure, between PCBs, display, component, microphone, MGA matrix component, etc. We offer design assistance for choosing the connector ...
Primary current: 12 A
Voltage: 0 V - 500 V
... production tolerances. The only solution then is to fit additional realignment mechanisms. Also, most currently available connectors do not offer the versatility needed for the contact stroke or the number of poles to be fitted and so ...
Primary current: 5 A
Voltage: 500 V
... DN40CF FLANGE, SUB-D 9-WAY FEEDTHROUGH, UHV Sub-Miniature D Feedthroughs Specifications Vacuum Leak Rate - UHV <5x10-10 mbar l/s Size or DN - DN40CF (2 ¾” OD flange) Compliance - Sub-D, DIN 41652, MIL-C-24308 Pin Gender - male Conductor Material ...
Allectra.com
Primary current: 10 A
Voltage: 250 V
... Insert -A Series , 4P+E, Screw termination, Male, Side Entry, 10 A, 250 V, 4 kV, Size:3A, Contacts:4P, Polycarbonate (PC), Connector Material: Brass (Silver Plated), Grey - RAL 7044 Cable Cross Section: 1.0 ... 2.5 mm² Product Code: ...
Mete Enerji
Primary current: 0 A - 30 A
Voltage: 0 V - 800 V
Pitch: 2 mm
... CMM connectors are designed to meet or exceed electrical & mechanical performances of MIL-DTL-55302F and BS-9525-F0033 standards. This modular connector allows more than 20 million arrangements. Main features: - ...
Nicomatic
6 expert tips
Prioritize modular connector systems to facilitate rapid equipment maintenance and reduce Mean Time To Repair on assembly lines.
Always verify the technical certification to ensure compliance with local building safety standards and long-term durability.
Select connectors with integrated shielding to eliminate electromagnetic interference risks in high-voltage industrial motor environments.
Specify field-wireable connectors to enable fast on-site repairs without requiring specialized factory termination equipment or tooling.
Evaluate total cost of ownership by considering the long-term reliability against the initial purchase price of economy components.
... Features: Low insertion loss High return loss Good repeatability Good interchangeability High temperature stability Applications: CATV LAN & WAN Telecommunication networks PON (Passive Optical Network) FTTX, FTTH (Fiber to the Home) ...
the best suppliers