Detectors

... in our THz range of products LARGE APERTURE Models range from 9 to 12 mm Ø aperture. CALIBRATED AT 10.6 µM THZ-D detectors are calibrated at a single wavelength (10.6 µm) and include wavelength correction data from 10.6 to 440 ...

... in our THz range of products LARGE APERTURE Models range from 9 to 12 mm Ø aperture. CALIBRATED AT 10.6 µM THZ-D detectors are calibrated at a single wavelength (10.6 µm) and include wavelength correction data from 10.6 to 440 ...

... -in amplifier. BATTERY OR AC POWERED Includes 9V battery and AC power eliminator CALIBRATED AT 0.63 µM THZ-I-BNC detectors are calibrated at a single wavelength (0.63 µm) and include typical wavelength correction data from 0.25 ...

... - 150 m detection range for OSI-10 - High protection against false alarms - Exclusion of strong solid foreign bodies and dust - Alignment drift tolerance - Double wavelength smoke detection - Three selectable alarm thresholds Smoke imaging detection ...

... Certified ATEX ZONE 1 II 2G EX D IIC T6 and certified EN54-5 for temperatures A2 (54 ° to 70 ° C) and C (84 ° to 100 ° C) heat detector. Rate of climb and / or static alarm. LED status: OFF in normal condition, we alarm. Or Pulse in normal ...

... non-intrusive - Fully programmable - small and low energy consumption - ATEX II CERTIFICATE 2G EX D IIC T6 Certified ATEX gas detector II 2 g EX d ic T6, aluminum or stainless steel alloy case, IP65 protection index. Available outputs: ...

... will be. ALADIN is suitable for outside and indoor electrical equipment. Technical specifications Electric field detector : Detector operating range: 2 kV to 400 kVReference detection distance: ≈ 2 metres from a ...

... / Standards • IEC 61243-1: VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C • CE compliante / Use These voltage detectors are designed for "proving dead". making sure that nominal voltage ...

... / Standards • IEC 61243-1: VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C • CE compliante / Use These voltage detectors are designed for "proving dead". making sure that nominal voltage ...

... The PORTAFID® M3K portable gas detector is the perfect tool for above-ground inspections of underground gas lines. It is reliable and highly accurate, resistant to interference from moisture and only responds selectively to hydrocarbons. ...

... Ergonomic mobile gas warning device The EX-TEC® PM 400 is a mobile gas warning device that reliably warns plumbers, staff from utility companies, network operators, fire services and other technical staff of dangerous gas concentrations. The compact ...

... The Multitec 410 is the latest addition to the Sewerin range of multiple gas warning devices. Unlike the Multitec 5xx devices, the Multitec 410 has a catalytic sensor, also known as a catalytic combustion sensor, for measuring flammable gases. This ...

... Mounting: wall or ceiling Detection range: 15 m, 110° angle Current consumption: 5mA Supply voltage: 24 AC/DC Alarm relay: 200 mA, 24 V AC/DC, potential-free relay changeover switch Current consumption: 5mA Temperature range: -20…+50°C Ambient ...

... Mounting: ceiling Detection area: height x 2.5 = diameter of detection area, 25° angle Current consumption: 15mA Supply voltage: 24 AC/DC Alarm relay: 200 mA, 24 V AC/DC, potential-free relay changeover switch Current consumption: 5mA Temperature ...

... DUSTTRAK ENVIRONMENTAL AIR MONITOR SYSTEM 854301-1 SKU: 854301-1 The DustTrak Environmental Air Monitor System can house DustTrak photometer models 8540 or 8543. DustTrak's early detection features allow quick response to exposure concerns. This system ...

Every space is different - the TSI AirAssure™ Indoor Air Quality (IAQ) Monitors available in two, four, and six-gas models are designed to help you optimize your indoor air quality ventilation needs, while helping to achieve a safe and productive space. ...

... Detect both ferrous and non-ferrous tramp metal in magnetic ores, highly mineralized products and food products even when conveyed on steel cable belts. Features & Benefits: All solid state integrated circuits Designed for outdoor use No balancing ...

... The new ultrasonic double-sheet control dbk+4 combines multiple variants of its predecessor into a single unit, opening up entirely new possibilities for use. Highlights 3 control inputs for trigger, Teach-in and external sensitivity settings for ...

... The dbk+5 extends the area of application of double sheet controls to heavy carton, corrugated cardboard, and plastic sheets. Highlights High-performance ultrasonic double-sheet control especially for the probing of corrugated cardboard as well as ...

... ASCO CO2 Gas Detectors are used to protect personnel wherever CO2 gas or dry ice is used in closed areas, for example during dry ice blasting or when producing dry ice. ASCO offers wall-mounted solutions for area monitoring and portable ...

... industrial and general indoor air quality (IAQ) applications. GrayWolf offers five different plug-and-play Photo Ionization Detector (PID) sensors to choose from; with ranges optimized for your specific application. The DirectSense II-3 ...

... institutional, and residential indoor air quality (IAQ) applications. GrayWolf offers 4 different plug-and-play Photo Ionization Detector (PID) sensors to choose from; with ranges optimized for your specific application. The DirectSense ...

... The WolfPack TOX by GrayWolf Sensing Solutions is a Portable multi-gas photo-ionization detector which comes with three probes having 6 sensors individually. It has a capability of measuring 21 parameter simultaneously when used with ...

... 100 Rapid Pyrolysis RoHS Detector is exquisitely engineered by Skyray for rapid screening of 4 phthalate esters(DIBP, DBP, BBP, DEHP) in RoHS 2.0 Directive (EU 2015/863) .It is the only IEC62321-compliant rapid pyrolysis detector ...

The LIDAR-A-01 Atmospheric Aerosol LIDAR is a portable laser radar system that conducts 3D monitoring of atmospheric particulate matters featuring 3D scanning, real-time monitoring and full automatic operation. Combining horizontal scanning, navigation ...

... Detection of Maillard-reactions, smoldering embers + fires. Industrial drying systems always harbor an increased risk of fires and explosions. The fire properties of the media change as a result of the removal of moisture. Especially in spray dryers, ...

... glowing embers, open flames and hot surfaces. Alongside grounding monitoring systems and spark extinguishing systems, the GSME detector series make an enormous contribution to increasing explosion safety. The GSME series have been developed ...

... grounding monitoring systems and spark extinguishing systems, the new detectors of the GSME and Hotspot series make an enormous contribution to increasing explosion safety. Both detectors have been developed for the early ...

... hours (continuous operation) Active Cooling : NO y/n Dimension Detector Head : 238 x 154 x 25 / 9.4 x 6.0 x 1.0 mm/inch Overall Dimension : 238 x 154 x 80 / 9.4 x 6.0 x 3.1 mm/inch Detector Head Weight : 1.6 / 3.5 ...

... Performance : Approx. 7 hours (continuous operation) Dimension Detector Head : 238 x 154 x 25 / 9.4 x 6.0 x 1.0 mm/inch Overall Dimension : 238 x 154 x 80 / 9.4 x 6.0 x 3.1 mm/inch Detector Head Weight : 1.6 / 3.5 ...

... With a resolution of 49.5 µm for an active area of 230×290 mm (9×11.4 in), the Go-Scan 2329 is the only detector on the market with such a high resolution to image size ratio. The image quality reaches class B (ISO 17636-2) for almost ...

The Perfomaster provides the hardware and software to generate a controlled spark over, detect this and evaluate the spark over to produce a pulse signal. The pulse signal is available on the output connector and can be used for counting the detected ...

In order to detect perforations in a moving material web, this special electrode is equipped with a resistance per emitter. When a perforation passes the electrode, there will occur a controlled spark over. This is detected by the associated CM5 high ...

... Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum ...

... Portable combustible gas detectors are a repacement for the succesfull XP-3110 and XP-3160 portable gas detectors. Portable combustible gas detector, easy to use for the detection of combustible gases ...

... The XPS-7 II suction type portable gas detector is a unique detector which enables you to switch easily between gases when needed. The sensors are kept under power in a so-called sensor stocker. The stocker can keep ...

... Single to Multi channel gas detector with internal pump for detection of gas leaks in semiconductor factories. Cartridge Sensors are factory calibrated and delivered to site ready for use. Communication via 0-20mA, PoE, ModBus/TCP, ...

The detection of glass breakage is a very sensitive issue for a wide variety of fillers, regardless of the product to be filled. There are special requirements for glass breakage detection, especially in the food sector, since in individual cases products ...

... Product overview

Applications

• Industrial and OEM cabling
• Machine integration and control panels
• Fixed installations and retrofits

• Brand: Vetter
• Product

... Product Description
The UNI Series from Uniphos provides portable single-gas detectors designed for continuous turn-on-and-run operation. Each model monitors a single specific gas (toxic gases or oxygen) with sensor options ...

... POLI Gas Detectors
PN | Gas Detected | Fact Sheet
MP400 | O2, LEL, CO, H2S | POLI_Multi-Gas- Detectors.pdf
MP400P | O2, LEL, CO, H2S | POLI_Multi-Gas- Detectors.pdf
MP400S | Full range of ...

... Large Core Fiber Defect Detector is mainly used to complete real-time static electricity removal, fiber surface dust-scavenging by air injection, real-time diameter detection and real-time defect detection (fiber surface collapse, bulge, ...

... model VL-3701 is a high quality photometric detector calibrated for the measurement of illuminance and has proven itself over many years in numerous demanding industrial and scientific applications. The detector can be ...

... head whose photometric responsivity and cosine field of view correspond to the DIN 5032 - Article 7 quality class B. The detector can be combined with all optometers and light meters from Gigahertz-Optik. Traceable calibration The ...

... measurement head whose scotopic responsivity and cosine field of view correspond to the DIN 5032 - Article 7 quality class B. The detector can be combined with all optometers and light meters from Gigahertz-Optik. Traceable calibration ...

The CGS-40 Gate Sensor is equipped with a large sensor window and utilizes dual sensing plates for detection of adhesive on the top and bottom sides of the board. The CGS-40 verifies adhesive integrity for positioning, volume, and length. Due to the gate-style ...

... Eltex thread sensor 15965. This thread sensor is designed to monitor up to 6 sewing threads on automatic sewing machines. It checks that the thread is moving in stitches. Both no thread movement and continuous thread movement will result in an active ...

... Eltex UPG-Stitch Thread break sensor for sewing machines. The UPG-Stitch is a thread break sensor designed to be used on sewing machines. It checks that the thread is moving in stitches. Both no thread movement and continuous thread movement will ...

... Eltex G3s Yarn Break Sensor G3s is a yarn break sensor that uses piezoelectric technology to detect yarn movement (not presence) of all types of yarns in many different applications. It does not require a Central Control Unit, making it very cost effective. ...

... Product overview
The BG series ultrasonic bubble detectors are non‑invasive sensors designed to detect air bubbles and distinguish gas/liquid states in fluid‑filled flexible tubing. The sensors use dry coupling (no ...

... Overview
The BG series ultrasonic bubble sensors are dry‑coupled, non‑invasive detectors for accurate detection of air bubbles and gas‑liquid two‑phase states in flexible tubing. The sensors use ultrasonic pulse technology ...

... The explosive or flammable liquids can be detected to prevent from bringing the hazardous materials. Conformity to ECAC LSR-M2 meets the performance of Type A and Type BStandard-3 required by ECAC (European Civil Aviation Conference). Quick and ...

This product is a security device that detects dangerous liquids such as explosives, flammables, and strong acids. Also, it can identify dangerous liquids in plastic and glass bottle containers without opening the containers.

... Box of 30 indicator pads for the sea water detection test.
To be used with the GESERCO sea water in oil test kit p/n: RC9300
...