- Hydraulics - Pneumatics >
- Valve >
- Discharge valve
Discharge valves
DN: 50 mm - 1,400 mm
Temperature: -46 °C - 150 °C
... sealing valve (DBB) allows the venting and discharge of the valve chamber at the fully open and fully closed position. 4) There are two valve seat design: Single ...
DN: 2 in
This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems operation. The ...
DN: 1 in
This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems operation. The ...
DN: 2 in
This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems operation. The ...
DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 80 °C
Throttle check valve, Discharge throttle (C) quick connector Hose 6/4, G 1/8, For throttling flow rates and regulating the piston speed of cylinders. Small dimensions, ideal for tight spaces. To ...
RIEGLER & Co.KG
Level control valve Tasks One of the functions of condensate (level) control valves is to control the level of accumulated condensate and discharge it to the main or auxiliary condenser. ...
DN: 0.5 in
Pressure: 60 bar
Temperature: -20 °C - 180 °C
Valve specially designed to connect the gauge to one end and the other end to the process, with special housing for the seal. It is not necessary to use any type of hemp or PTFE, etc, which can become introduced in the ...
DN: 250 mm - 3,400 mm
Pressure: 10 bar - 100 bar
The discharge of the flow is controlled by the movement of the sleeve of the valve against the fixed cone. The fixed cone valve discharges the raw water of dams to free ...
DN: 200 mm - 400 mm
Pressure: 10 bar - 150 bar
... Double Flanged Sleeve Valves. They allow a very high upstream pressure loss, without any risk of critical phenomena (cavitation, vibration, noise) even with little downstream head pressure. They are also used as synchronous ...
DN: 0.75, 0.625 in
Pressure: 34.5, 31 bar
Temperature: -28, -18, -8 °C
... pressure. The Parer LAC pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser ...
DN: 0.25 in - 1.375 in
Pressure: 450, 700 psi
... SHGB discharge bypass regulating valves have a brass body. The smaller capacity direct acting valves are available with SAE or ODF connections. The larger capacity pilot operated valves ...
Parker Sporlan Division
DN: 0.75 in - 1 in
Pressure: 103, 10.3 bar
Temperature: -40 °C - 82 °C
... high-pressure shut-off valves serve to provide overpressure protection by containment. Type 634 shut-off valve with internal registration is installed between a pressure reducing regulator and a downstream ...
DN: 40 mm - 400 mm
Pressure: 60 psi - 365 psi
... hydraulic, line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-1MC is activated by a hydraulic relay valve which ...
BERMAD CS Ltd
DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 200 °C
RDV rotary disc gate valve The valve plate is driven by the rotating shaft, so that the motion of the valve switch is rotating. The piston rod of the pneumatic actuator does not contact ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 15 mm - 350 mm
Temperature: -46 °C - 180 °C
... frequency polyethylene (PE)/polypropylene (PP) processing applications • Polyethylene • Polypropylene • Other powder discharge systems
DN: 25 mm - 150 mm
The "Monopok" valve is a 1/4 turn ball valve shutoff, with full waterway, made of an aluminium alloy section heat-treated. The whole is machined on a computerised and automated machine tool, which guarantees ...
POK
Pressure: 150 bar
The High-Speed Isolation Valve provides a solution for vital explosion isolation applications. It operates in milliseconds to provide a mechanical barrier within a pipeline. The High-Speed Isolation Valve ...
DN: 100 mm - 500 mm
Pressure: 6 bar - 10 bar
Temperature: 80, 400, 250 °C
Variable working- or emergency slide gate, which is suitable for discharge and dosing of dusty to medium grained bulk material. Product inquiry Dimensional sheet MATERIAL HOUSING :Cast iron, cast aluminium, cast ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
... and position of the valve according to the opening and closing position indicator. Opening and closing torque: 1. The upward unfolding discharge valve is opened by the upward movement ...
DN: 25 mm - 150 mm
Pressure: 16 bar
Jacketed bottom discharge ball valve is a kind of ball valve with steam heating jacket to keep media heat preservation. Suitable for the media that easily solidified thus can not flow ...
Wenzhou Pioneer Valve Co., Ltd.
DN: 2 cm - 3.5 cm
• Lower permeability and pressure loss compared to elastomer valves • High system safety and chemical resistance • Maximum residual drainage and reusability due to better gas tightness • Long and position-independent ...
DN: 150 mm - 300 mm
Suitable for discharge dry dust, powder, granules and fibrous materials from cyclones, filters, hoppers etc., whilst maintaining an effective airlock. The valve consists of two flaps connected by counterweights ...
Pressure: 0 bar - 12.5 bar
Temperature: 0 °C - 50 °C
Flow rate: 3,075 l/min
... prevents the system from being accidentally or wrongly pressurized. * It can be wall mounted using the relative holes. * Discharge connection: G1/4”. * Maximum inlet pressure: 12,5 Bar (1,25 MPa). * Max. ambient temperature ...
Aircomp by Stampotecnica
DN: 8 mm - 50 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C
... pneumatic actuator and valve into one body, eliminating packing glands, actuators and mounting kits. There are no exposed moving parts, eliminating pinch points and increasing operator safety. Since the actuator is part ...
DN: 50 mm - 1,200 mm
Pressure: 4 bar - 10 bar
Temperature: -30 °C - 200 °C
... comes out of the elastomer ring in the full open position of the valve and prevents the contact with the fluid. The fluid can be drained from the discharge line which is located under the valve ...
Doruk Endustri Ltd.
DN: 10 mm - 150 mm
... through the vacuum valve from the bottom to the top to provide maximum protection against drawing dirt particles into the tank during venting operations. The valve includes an integral drip pan which ...
... intakes and outflow/discharge applications (turbine protection, etc.). “Off-set” disc design and sealing through elastomer seals fixed to the disc for optimum tightness and allowing seal maintenance without disassembling ...
Pressure: 0 bar - 15 bar
Maximal inlet pressure (bar) : 15 Outlet pressure (bar) : 0 - 15 Maximum discharge (nm3/h) : 20 Gas compatibility : Non corrosive gas + O2 (C2H2 excluded)
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining