Flow rate: 2 l/min
Pressure reducing valves are a type of pressure control valve. They maintain a largely constant outlet pressure even at a variable (higher) inlet pressure. The pressure reducing ...
Pressure: 30, 70, 250, 320, 315 bar
Flow rate: 8, 10, 25, 60, 12 l/min
The pressure reducing valve type ADM is directly controlled. These valves feature an override compensation, i.e. acting like a pressure-limiting valve if the secondary ...
Temperature: -198 °C - 450 °C
DN: 0.5 in - 8 in
Pneumatic control valve USAGE High-pressure service Throttling service Low-pressure service VERSION ANSI MEDIUM TEMPERATURE -198 to 450 °C / -324.4 to 842 °F
Pressure: 20 bar - 315 bar
Flow rate: 0 l/min - 180 l/min
... switching valves. They open at a specified, adjustable pressure. 2. Pressure-reducing valves These valves are control valves. They keep the output ...
Pressure: 0 bar - 315 bar
Flow rate: 0 l/min - 150 l/min
... behavior of the system. The following valves are available in the sandwich plate design: Pressure-relief valves Pressure-reducing valves Check valves Hydraulic ...
Temperature: 140 °C
Pressure: 10 bar
DN: 25 mm - 150 mm
... provides for defined compression of seat seal Ball shaped housing prevents sump or dome, reducing CIP cleaning times Clamp closure provides for quick and easy valve maintenance Many different housing ...
Temperature: -20 °C - 120 °C
Pressure: 6, 10 bar
DN: 80 mm - 100 mm
... regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. • Connection system for solvent weld and ...
Temperature: 40 °C
Pressure: 6, 10 bar
DN: 15 mm - 100 mm
... pressure on the diaphragm - reduction in the tightening torque of the screws fixing the actuator to the valve body - reduced mechanical stress on all valve components (actuator, body ...
Pressure: 63 bar
DN: 6 mm - 15 mm
Reduced Port Valves Inspected & Tested according to API 598 Standard Investment Casting Design:ASME B16.34 Material:ASTM-A351-CF8M , ASTM-A351-CF8 Working Pressure:1000 WOG / PN63 Size Ranging:1/8"~1/2" (DN6~DN15) End ...
Temperature: -10 °C - 150 °C
... diaphragm valve is manually operated. All medium wetted parts are made of PVDF or PTFE. -High purity due to cleanroom manufacturing -High Flow version -High flow rates -Minimal deadleg -Optional flow direction -Also ...
Diaphragm / Pinch valves Diaphragm valves are characterized by a straight passage design, and are typically used with corrosive or abrasive fluids. This valve type may be either coated ...
Temperature: -5 °C - 80 °C
Pressure: 5,000,000 Pa - 15,000,000 Pa
... indications have confirmed that the valves operation life time will exceed 10 million cycles.Currently the VCH Series is available in four different valve configurations; 2 port valve ...
Pressure: 320, 400 bar
Flow rate: 40, 90, 150, 350 l/min
Pressure reducing and sequencing valves CETOP 3/NG6. These subplate mounting piloted type pressure reducing and sequencing valves ensure a minimum variation in their ...
Temperature: -20 °C - 50 °C
Pressure: 100 bar
DN: 6 mm
... rotatable by 90° Electrical connection as individual connection with cable gland Product description The 3-way pressure reducing valve type 3 DREP 6.. is direct operated by proportional solenoids. ...
Temperature: -30 °C - 90 °C
Pressure: 0 bar - 50 bar
DN: 20 mm
Proportional Pressure Control Valve, Reducing - Relieving, Direct-Acting, Slip-In Style PP2P3-W3 Size D20 • Qmax 30 l/min (8 GPM) • pmax 50 bar (700 PSI) Valve is primary used in ...
... fabricated angle valves are used with compressible fluids on special applications requiring maximum noise attenuation capability and high capacity. Typical applications include main steam reducing valves ...
Pressure: 10,000 psi
DN: 0.375 in
Flow rate: 5 us gal/min
Developed by SPX®, the Load Lowering Valve is designed for use in pressure reducing, load lowering, counter balancing, and other precision metering operations. This particular model is capable of loads ...
DN: 25 mm - 80 mm
Vertical reducing valve. From DN 25 to DN 80. Valve body: normally cast iron, or hard-rubber-lined cast iron, with external corrosion-proof coating. Ball: synthetic elastomers or PTFE. Length ...
Temperature: 5 °C - 180 °C
Pressure: 1 bar - 8 bar
DN: 1.8 mm
... for COD Measurement. ・An elastomer is employed for the seal material, reducing damage to the valve seat by foreign matters in the fluid and associated leakage problem. If you have any questions, please ...
Temperature: 150, 130, 135, 121 °C
Pressure: 6 bar - 10 bar
... aseptic double seat valve N13 the technologies of hygienic and aseptic valve design are considered in one valve. It combines the advantages of the well-proven hygienic double seat valve ...
Normally open type valve. Pressure can be controlled more easily even at low pressure because of the structure for the pilot flow supplied to the built-in flow control valve from the primary side.
Temperature: -10 °C - 200 °C
Pressure: 0 bar - 16 bar
DN: 10 mm - 65 mm
Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° C and 16 bar ...
Temperature: -15 °C - 120 °C
Pressure: 16 bar - 40 bar
DN: 15 mm - 54 mm
... schedule A. The valve incorporates the compression’s fitting, reducing the components to use and therefore the costs. This valve design incorporates a press-fit connection wich reduces ...
Pressure: 60 psi - 80 psi
Multi-Vane Conductance Control Valves CF Flanged Valves have stainless steel flanges and vanes, while others have clear alodine aluminum flanges with SST vanes. Have no parts protruding above or below ...
Temperature: 370 °C
Pressure: 150 psi - 740 psi
DN: 2 in - 60 in
Design Features:High Performance Butterfly Valves comply with API 609 Category B and can be used for shutoff and throttling control. They are designed to handle everything from general applications to viscous and corrosive ...
Pressure: 16 bar - 100 bar
DN: 150 mm - 400 mm
Flow rate: 45 m³/h - 1,100 m³/h
... the delivery unless it is ordered. The valve serves as a control, reducing or by-pass element with indirect actuating. The max. permissible operating pressures acc. to EN 12 516-1. The intention to use ...
Pressure: 0 bar - 290 bar
DN: 6 mm
The UZRR6 Pressure-Reducing Valve is size 6, and has a maximum working pressure of 31.5 MPa. Its flow rate reaches up to 50 dm3/min. The valve is designed with a main valve ...
Pressure: 140 bar
... operation with fluid flow in both directions is especially useful when the valve is used for heat pump applications, moreover simplifying refrigerant circuit layout and reducing installation costs. Fitted ...