Double-flange valves

DN: 25 mm - 150 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C

Features •Face-to-face minimised due to sandwich design •Weight minimised through sandwich design •High reliability due to thick-walled PFA lining •Maintenance-free and adjustable stem sealing Specifications •Design - DIN/ISO ...

DN: 6 in - 48 in
Pressure: 150 psi

Double-offset flanged butterfly valve (resilient-seated) according to the AWWA C504 standard. Long service life, as the medium does not come into contact with the bearing, and due to ...

DN: 50 mm - 600 mm
Temperature: -40 °C - 260 °C

• Modulating service • Airport refueling • Hydrocarbon processing • Chemical/petrochemical processing • Purified gas • Steam and vacuum services • Power and utilities • Refrigeration • HVAC • Alumina refining

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating ...

DN: 2 in - 10 in

Direct access. • Bolted yoke bonnet. • Outside rising stem. • Non rising handwheel. • Wedge of double disk or solid. • Drilled and dimensioned flanged according ASA B-16.5. • Distance between sides, ...

DN: 4 mm - 32 mm
Temperature: -50 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 200 mm - 2,800 mm

• double flanged eccentric butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN10/16 • face to face dimension according EN 558-1 series ...

DN: 15 mm - 200 mm
Temperature: -20 °C - 185 °C

... Ability: - 10000PCS/Mouth Electric Actuator High Pressure Full Port Two Piece Ball Valve Double Flange Ends Specifications High Platform Ball Valve ...

DN: 50 mm - 800 mm
Pressure: 10 bar - 25 bar

Flanged butterfly valve has simple structure, small in size, light weight and good flow control features.Available soft seal and metal seal for used in different fields such as medicine, paint, environmental ...

DN: 50 mm - 350 mm
Pressure: 16 bar
Temperature: -40 °C - 200 °C

Flapcon® BV40 series Double Flanged type butterfly valves are manufactured from Ductile Iron, Steel and Stainless Steel castings. The BV40 Series with concentric design and vulcanized ...

DN: 50 mm - 500 mm
Pressure: 250 psi
Temperature: -29 °C - 204 °C

... resilient seated butterfly valve is a Double Flanged design which can be used for dead-end service. A major design advantage of Bray valve product lines is international ...

DN: 50 mm - 2,000 mm
Pressure: 16 bar

Rubberlined EVFS Short pattern Construction - Concentric butterfly valve with bonded vulcanised rubber linings Body type - Double flanged type End connection - ISO, PN 6 / PN ...

DN: 2,500 mm

Circular or rectangular isolating damper with shut-off system by means of a sliding gate. Available with pneumatic, electric, hydraulic or manual actuator. Depending on the sealing system, varying levels of tightness can be obtained ...

DN: 25 mm - 100 mm
Pressure: 6 bar
Temperature: -25 °C - 120 °C

The Type 09420- Flanged Gate Valves feature a body made of bronze with a screwed top work in brass. The valves comes with maintenance-free gland packing or O-Ring. The flanged ...

DN: 300, 250 mm

... manual exit valves for silos with cement, gypsum, building chemicals and similar bulk solids. BV2FF model: Double flange, upper flange square, lower flange ...

DN: 2 in - 60 in
Pressure: 1,600,000 Pa
Temperature: 120 °C - 450 °C

... China Product Description Cast steel and cast iron Butterfly Valves, wafer butterfly valve, lugged butterfly valve, double flanged butterfly valve, ...

DN: 1.5 in
Pressure: 16 bar
Temperature: -40 °C - 250 °C

The Perolo ND40 ATCO FULL BORE self-contained ball valve is designed to be used as an air inlet or as a fluid inlet/outlet valve. With its MAWP of 16 bars, this valve exceeds T22 requirements ...

DN: 15 mm - 700 mm
Pressure: 16, 25, 40 bar
Temperature: -60 °C - 80 °C

Ball Valve Flange/Flange MATERIAL SPECIFICATION (climate class N) Body: carbon steel 20 (1.1151) Stem: stainless steel (AISI 420) Ball: stainless steel DN 15-32: ...

DN: 50 mm - 600 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 120 °C

Double flanged butterfly valve with centric disc. Available with alu-bronze disc (fig. 4620) or stainless steel disc (fig. 4630)

DN: 50 mm - 1,000 mm
Pressure: 10, 16, 2 bar
Temperature: 0 °C - 600 °C

... and ASME B16.104 can be used as a control or damper valve. Suitable for temperatures up to 600 degrees Celcius and a pressure of 2 bar. DN50 up to DB 600 in wafer type, DN 700 up to DN 100 double ...

Double Flanged High Performance Butterfly Valve AFC Double Flange High Performance Butterfly Valves provide accurate control of high ...

DN: 75 mm - 1,250 mm

Tender specification PVC HOKA PVC butterfly valve with hand lever with flange plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. ...

DN: 50 mm - 400 mm
Pressure: 240 psi

BUTTERFLY VALVE Technical characteristics: Wafer type, for mounting between two counter flanges Working pressure PN16 Flanges drilled acc. PN10/16 Gearbox operating available Mounting ...