{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Pressure: 350 bar
Flow rate: 30, 75, 150, 320 l/min
The load-holding valve type CLHV is suitable for applications with low and medium tendencies to oscillate and is used especially in connection with proportional directional spool valves, e.g. types PSL ...
HAWE Hydraulik SE
Pressure: 315 bar
Flow rate: 15, 40, 65, 120 l/min
Pre-load valves, also called sequence valves are a type of pressure control valve. They generate a largely constant pressure drop between the inlet and outlet on the valve. ...
HAWE Hydraulik SE
Pressure: 500 bar
Flow rate: 22 l/min
Pressure reducing valves are a type of pressure control valve. They maintain a largely constant outlet pressure even at a higher and changing inlet pressure. The pressure reducing valve ...
HAWE Hydraulik SE
Temperature: -30 °C - 200 °C
Pressure: 0 bar - 30 bar
DN: 13 mm - 50 mm
... G-thread to DIN ISO 228-1 or NPT-thread to ANSI/ASME B 1.20.1 or Rc-thread to DIN 10226-2 - Medium pressure 0 ... 30 bar - Valve function 2/2, NC (Normally Closed), NO (Normally Open), DA (Double Acting - Suitable for ...
Temperature: 0 °C - 150 °C
Pressure: 0 bar - 6 bar
DN: 6 mm - 25 mm
... applications: the pneumatic pinch valve VZQA with silicone diaphragm comes in a normally open (NO) variant with a declaration of conformity in accordance with Regulation (EC) No 1935/2004 as well as FDA 21 CFR 177.2600. ...
DN: 0.25 mm - 4 mm
Flow rate: 5 m³/h - 435 m³/h
... lockable hand lever - with ISO 5211 flange connection: • 3-piece, 2-way • 3-way, L and T hole as horizontal design - Threaded connection to ANSI B 1.20.1 (NPT) - lockable hand lever optional - anti-blow out ...
Temperature: 0 °C - 70 °C
Pressure: 0 bar - 10 bar
DN: 0.25 in
... resolution needle valves cover the two highest flow ranges whereas the high resolution valves cover the lower gas and liquid flow ranges. Features of needle valve Compact needle ...
Mass Flow ONLINE BV
Temperature: 0 °C - 70 °C
Pressure: 0 bar - 10 bar
DN: 0.25 in
... resolution needle valves cover the two highest flow ranges whereas the high resolution valves cover the lower gas and liquid flow ranges. Features of needle valve Compact ...
Mass Flow ONLINE BV
Temperature: 0 °C - 70 °C
Pressure: 0 bar - 10 bar
DN: 0.25 in
... resolution needle valves cover the two highest flow ranges whereas the high resolution valves cover the lower gas and liquid flow ranges. Features of needle valve Compact needle ...
Mass Flow ONLINE BV
DN: 0.125, 0.5, 1, 0.75 in
Flow rate: 4, 70, 40, 20 m³/h
... used as safety valves on non-commissioned tanks or containers at high levels of vacuum and on vacuum cup lifting systems. The level of vacuum is adjusted by rotating the knurled bush in both directions. The fine thread ...
Pressure: 63, 40, 100 bar
DN: 15 mm - 100 mm
... BallValve 500 HKI Ball valve three-part thread or welding ends BV500.HKI-I BV500.HKI-A For manual on-off function. Three-part ball valve with floating precision ball of high flow ...
Temperature: -10 °C - 130 °C
Pressure: 25 bar
DN: 15 mm - 50 mm
... bronze balancing valves must be opened completely to ensure the valves are fitted properly at the pipeline. To obtain maximum performance from the valves, the body and its threaded ...
Mival
DN: 0.375 in - 4 in
This one-piece valve is made of steel. The ball and stem are of stainless steel. However, stem gaskets, and seat rings are made of PTFE material. The body is constructed from carbon steel with the coupling and gland. ...
Mival
DN: 0.375 in - 4 in
This model has a gland, coupling, and a carbon steel body. The stem and stainless steel ball accompanies the PTFE seat rings and stem baskets.
Mival
Temperature: -20 °C - 150 °C
Pressure: 25, 32, 40 bar
DN: 0.25 in - 3 in
This Ball Valve from Prevost is a tool that helps in the isolation of one or more sections of a network. This full flow valve is specifically designed to have specifications that can work in different ...
Temperature: -15 °C - 150 °C
Pressure: 25 bar
DN: 15 mm - 50 mm
Special features Consisting of three-way valve and actuator Male thread connection and welding or threaded ends Mixing valve also with female thread ...
Temperature: 5 °C - 120 °C
Pressure: 16 bar
DN: 15 mm
... Consisting of single-seated globe valve and actuator Particularly suitable for local heat supply and large heating networks Accessories Type 2 NI Strainer Options Intermediate insulating piece ...
Temperature: -10 °C - 180 °C
Pressure: 40 bar
DN: 15 mm - 50 mm
... 4740 Limit Switch Fixture for holding proximity switches NAMUR adapter for connection of a solenoid valve 3/2 way solenoid valve for direct actuator attachment (double nipple required for ...
Temperature: -29 °C - 538 °C
Pressure: 0 bar - 136 bar
Screwed and socket weld carbon steel piston type, in line stop valve for use on steam, condensate and liquid systems. - Efficient - Accurate - Easy to maintain
Temperature: -20 °C - 180 °C
Pressure: 4, 5, 16 bar
DN: 6 mm - 250 mm
Elster Kromschroeder valves for manually shutting off gas, air and water are EC type tested and certified. The valves are available in Diameter Nominal ranging from 6 to 250, 2 connection types and pe ...
Pressure: 4, 5 bar
DN: 10 mm - 150 mm
... ensure user safety. Choose one of the thread or flange connection systems and enjoy this high quality valve.
Pressure: 100 mbar - 1,500 mbar
DN: 15 mm - 25 mm
... certified control valve is designed for thermoelectric gas fired installation safeguarding up to 350kW in combination with the ZT thermo pilot burners with a closing time of <30s, and a power supply that is independent. The ...
Temperature: 0 °C - 60 °C
Pressure: 0 bar - 3 bar
DN: 0.25 in - 0.5 in
... through flow path Furon® Stopcock Valves are available in 2 and 3-port configurations, with sizes ranging from 1/4" to 1/2" orifice. In addition Furon Stopcock Valves are now offered in industry standard ...
Temperature: 0 °C - 100 °C
Pressure: 0 bar - 6.8 bar
DN: 1 in
... ® In-Line Valve offers the advantages of a welded system with the ability to rapidly change out components. It eliminates dead volume space and is especially for use in high-purity/corrosive chemical applications including ...
Temperature: -30 °C - 120 °C
Pressure: 0 bar - 320 bar
Flow rate: 0 l/min - 10 l/min
... throttling orifices ›› The housing of the VSK2 valve is withouth surface treatment, the VSK4 housing is phosphated. All the other parts are zinc-coated. Functional Description The pressure compensated flow control valves ...
Temperature: -30 °C - 120 °C
Pressure: 0 bar - 350 bar
Flow rate: 40 l/min
... compensator in the direction from 1 to 2. The valve will maintain the set flow regardless of pressure variations on the regulated or inlet port. In flow direction 2 - 1, the valve works as an ordinary ...
Temperature: -30 °C - 120 °C
Pressure: 350 bar
Flow rate: 80 l/min
... actuator against overloading and pressure peaks ›› Integrated check valve acting as an anti-cavitation valve ›› When installed close to actuator the valve can be used as a hose burst ...
Temperature: -10 °C - 200 °C
Pressure: 63 bar
DN: 8 mm - 300 mm
... ASME B 16.34 / ISO 17292, KSB Products has come up with a three-piece floating ball valve, complete with threaded ends for added security. Versatile and durable, these valves are extremely ...
KSB
Temperature: 0 °C - 538 °C
... ECOLINE GTF 800 gate valves with forged steel A105 trim 8 (stellite/13% Cr) are equipped with a bolted bonnet. With a solid wedge and graphite packing, pressure/temperature ratings of ECOLINE GTF 800 conform to ASME ...
KSB
Temperature: 0 °C - 593 °C
Pressure: 0 bar - 264 bar
DN: 15 mm - 50 mm
... socket weld ends to ASME (B16.11) and the line connection is threaded NPT F as per ASME (B1.20.1). The valve testing is in compliance with AP 598 codes. It is available in alloy steel and carbon steel. ...
KSB
Temperature: -10 °C - 250 °C
Pressure: 40 bar
DN: 0.5 in - 2 in
Features Process valves PN40 for severe applications Robust design, built to withstand steam, superheated water and corrosive fluids Long service life Resistant to thermal shocks Pressure can ...
Temperature: -10 °C - 184 °C
Pressure: 0 bar - 6 bar
DN: 32 mm
Features Long service life High flow capability Anti water hammer design High cycling Back pressure resistant The actuators are maintenance free
Temperature: -10 °C - 250 °C
Pressure: 0 bar - 40 bar
DN: 0.5 in - 2 in
Features Process valves PN40 for severe applications Robust design, built to withstand steam, superheated water and corrosive fluids Long service life Resistant to thermal shocks Pressure can ...
Temperature: -5 °C - 100 °C
DN: 8 mm - 25 mm
PNEUMATIC PINCH VALVE WITH EPDM SLEEVE - FEMALE / FEMALE - NORMALLY OPEN - STAINLESS STEEL 316L
BENE INOX
Temperature: -20 °C - 150 °C
Pressure: 63 bar
DN: 25, 20, 8, 15, 10 mm
MINI BALL VALVE WITH REDUCED BORE - FEMALE / FEMALE BSP - STAINLESS STEEL 316
BENE INOX
Temperature: -20 °C - 150 °C
Pressure: 55 bar
DN: 8 mm - 50 mm
58113 ONE PIECE REDUCE BORE VALVE - BSP - STAINLESS STEEL 316
BENE INOX
Temperature: -20 °C - 50 °C
Pressure: 0 bar - 18 bar
Temperature: -12 °C - 38 °C
Pressure: 100 psi
... HV) Plug Valves provide an economical and flexible method of custom-building a fluid flow control system, from a simple on/off valve to a more complex multi-valve arrangement, using a ...
Temperature: -12 °C - 38 °C
Pressure: 100 psi
... HV) Plug Valves provide an economical and flexible method of custom-building a fluid flow control system, from a simple on/off valve to a more complex multi-valve arrangement, using a ...
Temperature: 5 °C - 48 °C
Pressure: 0 psi - 75 psi
DN: 0.063, 0.125, 0.17 in
... maximum supply pressure of 75 PSI with a minimum cracking pressure of less than 10"H2O. The flow contol comes with a 10-32 UNF threaded nipple.
Temperature: -20 °C - 200 °C
Pressure: 0.5 bar - 250 bar
... screw-in valves into internally threaded bores using an Allen key. The TVR400 valves are made of high-quality stainless steel, making them very durable and wear-resistant. They are also ...
Temperature: -20 °C - 120 °C
Pressure: 10 bar
DN: 15 mm - 65 mm
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...
FIP - Formatura Iniezione Polimeri
Temperature: -40 °C - 140 °C
Pressure: 16 bar
DN: 10 mm - 50 mm
... BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications. Connection ...
FIP - Formatura Iniezione Polimeri
Temperature: -40 °C - 140 °C
Pressure: 16 bar
DN: 65 mm - 100 mm
... developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required ...
FIP - Formatura Iniezione Polimeri
Pressure: 0 bar - 34.7 bar
DN: 0 mm - 1.5 mm
This needle valve comes with an adjustable orifice, which can be used to control flow rates, as well as timing circuits, filing heads, bleeding vents and various other applications. In addition to this, the adjusted flow ...
Beswick Engineering Co, Inc.
Pressure: 0 bar - 13.8 bar
DN: 1.1 mm
... Beswick Company offer this 10-32 Thread Venting, Slide Sleeve Valve, constructed from brass, silicon, viton, chemraz, buna-N, and Flourosilicone to ensure it provides a trouble free and extended working ...
Beswick Engineering Co, Inc.
Pressure: 250 psi
DN: 1.78 mm
... Beswick MBV-1010 series is an ideal valve for applications that require a compact on/off switching valve. This 9g valve can deliver up to 17.2 bar (250psig) of pressure through its 0.070 ...
Beswick Engineering Co, Inc.
Temperature: -10 °C - 180 °C
Pressure: 16 Pa
... PP1020 Series Normally Closed ; PP1021 Series Normally Open Advantage of TORK Pneumatic Piston Valves ● Less pressure drop than the globe valves ● Short open-close time ● High flow rate ● Body ...
Pressure: 2,000 psi
DN: 0.25 in - 2 in
Type: BT-V1HC (1-pc Ball Valve 2000psi) Size: 1/4" ~ 2" AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded ...
BOLA-TEK Mfg.Co
Pressure: 2,000 psi
DN: 0.25 in - 2 in
Type: BT-V1M (1-pc Ball Valve Mounting Pad 2000psi) Size: 1/4" ~ 2" AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Mounting pad, Full port, ...
BOLA-TEK Mfg.Co
Pressure: 1,000 psi
DN: 0.25 in - 2 in
Type: BT-V13 (1-pc Ball valve 1000psi) Size: 1/4" ~ 2" AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308) Full port, Threaded end, 1000PSI/ PN63, Blow-out proof stem ...
BOLA-TEK Mfg.Co
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
Temperature: -10 °C - 120 °C
Pressure: 10, 20, 25, 30, 40 bar
DN: 0.25 in - 4 in
... manufactured, and logo. This valve can operate with temperatures from 10 to 120 degrees Celsius in various pressure conditions. This series also provides a complete bore valve with anti blow-out stem ...
SFERACO
Temperature: -10 °C - 120 °C
Pressure: 30, 40, 10, 20, 25 bar
DN: 0.25 in - 4 in
The valve's feature includes an anti blow-out stem and reversible handle. The handle is made of flat steel or an aluminum butterfly handle. Its handle nut is coated with Dacromet which provides protection against corrosion. ...
SFERACO
Temperature: -10 °C - 120 °C
Pressure: 30, 40, 20, 25 bar
DN: 0.5 in - 2 in
The 510 series has a full bore with an anti blow-out stem, and a solid ball included with PTFE packing. The unit's reversible handle can either be flat or butterfly in shape and can be made out of steel and aluminum, respectively butterfly. ...
SFERACO
Please specify:
Help us improve:
remaining