DN: 25, 32, 40, 50 mm
Pressure: 60 bar
Temperature: 70 °C
... gaskets O-ring - “DRY THREAD” - replaceable under pressure. Stainless steel spindle with rolled thread and bearing. Total sufrace rubberizing. Gate valve with full bore. All parts are protected against corrosion. ...
VARIMEX-VALVES Poland Sp.z.o.o.
DN: 15 mm - 100 mm
Pressure: 6, 10 bar
Temperature: -40 °C - 60 °C
... materials Compact structure, light installation, high-cost performance. Please close the valve before installation. Using a rubber gasket instead of an inner plug, the valve torque and tightness can be adjusted by ...
Ningbo Baodi Plastic Valve Co., Ltd.
DN: 1.5, 2, 2.5, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h
... This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, in the “close” ...
A.G.P. VALVULAS 10 SL
Pressure: 0.1 bar - 6 bar
Temperature: -30 °C - 100 °C
... . Ø available: ¼’’ and ½’’ Thread connection ISO 228-1 Metal parts AISI 304L Pivot lock PTFE O-ring NBR External surface finish Electropolished Upper level valve. Upper level valve drain ...
DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C
... proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: - 0 - 10 volt voltage: - 24V DC (+/- 10%) actuating ...
NieRuf Gmbh
DN: 15 mm - 400 mm
... Sets/Year Pressure Seal Extended Stem Gate Valve JIEYU gate valves are multi-turn valves typically used as a stop valve or isolation valve in either fully ...
Zhejiang Jieyu Valve Company
Pressure: 400,000 Pa - 600,000 Pa
Temperature: -25 °C - 85 °C
... Abstract： technical standard Working pressure: 0 4~0 6MPa Working medium: clean air Voltage: DC24V, (AC220V 50HZ) technical standard Working pressure: 0.4~0.6MPa Working medium: clean air Voltage: DC24V, (AC220V/50HZ) ...
Suzhou Xiechang Environmental Protection Technology Co., Ltd.
... Vatac Three piece Bolted Body Ball Valves are available both in Forged and Investment Castings. In Straight through two ports or Multi-ports structures. Designed and manufactured to the most updated international standards API 6D, ASME ...
Vatac Valves (Wenzhou) Corporation
DN: 25 mm - 150 mm
Pressure: 16 bar - 160 bar
... Wafer type three way ball valve is a thin type flange end ball valve with super-short compact in structure, short distance between the valve seat and the end flange, less medium retention, superior sealing ...
Wenzhou Pioneer Valve Co., Ltd.
DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C
... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve Operation Gear,pneumatic,Hydraulic,Electric ...
Zhejiang Ouming Fluid Casting Industry Co., Ltd.
Pressure: 140 MPa
... sériés of globe valves are mainly composed of valve body, valve core, adjusting rod, handwheel, etc. The valve body is made of steel forging, with nickel plating on the surface and excellent ...
Jiangsu Deenpu Petrochemical Machinery Co.,Ltd
DN: 0.25 in - 2.5 in
Pressure: 400,000 Pa - 1,600,000 Pa
... glycol. Brass valves are lighter weighted than stainless steel valves but have better corrosion resistance. While because brass valves are more expensive while the material is softer than carbon steel ...
DN: 0.5 in - 2 in
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 80 °C
... Description 2/3-way valve Impulse without differential pressure Body Stainless Steel, Red brass ...
GSR Ventiltechnik GmbH & Co. KG
DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -60 °C - 280 °C
... 2 pc body threaded ball valves are available in sizes from DN8 to DN100 with BSP threaded end connections. Face to Face Dimensions are according to DIN3202-M3 and PN63 working pressure. Ideally suited ...
Doruk Endustri Ltd.
DN: 0.75, 1, 0.5 in
... Brass ball valve Lever of aluminium Brass full-bore ball valve, 1⁄4” drain valve and extra 1⁄4” connection for pressure gauge. Aluminium lever. Brass ball valve, with full bore. ...
DN: 1 in - 4 in
Temperature: -20 °C - 60 °C
... PVC Threaded Ball Valve DIN Standard BSPT Thread Why choose HUASHENG? 1. We have each valve part and can manufacture them, so our price and quality are good, the lead time is short; ...
Huasheng Pipeline Technology Company
... USED FOR 1-2KG FIRE EXTINGUISHER
Ningbo Anke Fire Fighting Equipment Company
DN: 25 mm - 65 mm
... Concentrate Ball Valves come in standard sizes ranging from 1.0 to 2.5 in (DN25-DN65) to match the concentrate inlet thread (or flange) size on Winan proportioners and Inline Balanced Pressure Proportioner(ILBP) assemblies. ...
DN: 10 mm - 80 mm
Temperature: -10 °C - 250 °C
... Classification:Angle valve Click:24 Date:2019/07/01 Orifice DN15-50 Pressure 0.03-1.6MPa Connection size 1/2-2、Flange ...
DN: 8 mm - 50 mm
Pressure: 1,000 psi
Temperature: -46 °C - 232 °C
... Flow-Tek's Model S40 ball valves offer an economical compact, one piece body design. The one piece body supplies maximum structural strength while minimizing the number of potential leak paths. Model S40 valve bodies ...
DN: 0.25 in - 2 in
Pressure: 0 Pa - 32,000,000 Pa
... Fip brass gas ball valve Forged brass body standard port USA standard SIZE: 1/2'' FIP brass gas valve 3/4'' FIP BRASS GAS VALVE 1'' FIP BRASS GAS VALVE 600 WOG - 150 SWP Full ...
Ningbo Yinzhou Plumbing Hardware Co., Ltd.
DN: 20 mm
Pressure: 1 bar - 38 bar
Temperature: -196 °C - 120 °C
... Divertor Valves are constructed from stainless steel and has brass-made inner parts. This valve is approved for operating in air gases, vapors and cryogenic liquefied gases. It also uses a PN50 flange and is designed ...
HEROSE
DN: 300 mm - 600 mm
Pressure: 16, 19 bar
... special features of these valves are as follows: • Hermetic internal seal with shut valve • Low pressure losses • Can rotate butterfly through 360° so the seat is self-cleaning without removing the body ...
DN: 20 mm - 50 mm
... Sanitary Grade Threaded Butterfly valves Operating Principle Technical Parameter Installing Dimension Documents Downloads 1.Product Desciption: Specs: DN20-150，1″-6″ Standard：DIN、SMS、ISO Material：SUS304、SUS316L Application：beer ...
DN: 20 mm - 25 mm
Pressure: 13 bar
Temperature: -30 °C - 80 °C
... quickl valve can be installed in the piping and some important position such as outlet of compressor and upstream of pneumatic tools .Good for the separation ,adjustment and maintenance . Quick install . Provide a range of male ...
Pressure: 20 bar - 200 bar
... Volumetric Metering Valves AXDV-C Ultimate process reliability at lowest dosage volumes – made possible by the new ABNOX Valve. It allows accurate placing of minute quantities of your complex lubricant on your device. ...
DN: 6 mm - 100 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
... This series consists of two and three way, threaded-end shut-off valves, with the body in AISI 316 and a floating ball, manufactured in accordance with the most severe product standards. They are available in the following ...
Brandoni
DN: 0.25 in
Pressure: 414 bar
Temperature: -40 °C - 93 °C
... 316 SS, BF Series Ball Valve, CNG fast-fill, PEEK Seats, 1/4 Female NPT, 6000psig(414bar), -40°F to 200°F(-40°C to 93°C), 0.75 Cv, 3-way, 90° actuation, Low-temperature Service Body Material316 Stainless Steel Port 1 TypeFemale NPT Port ...
DN: 6.35 mm - 19.05 mm
Pressure: 350 bar
Temperature: -20 °C - 80 °C
... Equipped with a valve body with BSPP-GAS threaded ports, the VBCL overcenter valves are designed to be installed in-line within the hydraulic system in compliance with the spaces available on the machine. The ...
Oleoweb Srl
... patent-pending technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve Gate System! VeriShotᵀᴹ ...
Pressure: 280 bar
Flow rate: 20 l/min
... the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages Operation Counterbalance Valve with pilot assist are meant to control an overrunning ...
Wenzhou Meric Hydraulic Technology Co.,Ltd
DN: 0.25 in - 1.102 in
Pressure: -800 mbar - 2,000 mbar
... pressurization of large volumes of liquid for your microfluidic application. This cap is compatible with any lab bottle with a standard thread GL-45. It is compatible with Fluigent’s pressure controllers: the MFCS™ series and the LineUp™ ...
DN: 6.35 mm - 50.8 mm
... piece, full port ball valve with NPT ends and an ISO 5211 compliant direct mount actuation pad. The 2WE20 is rated to 2000 WOG in sizes ranging from ¼” to 1” while the 5WE20 is rated to 1500 WOG in sizes ranging from 1-¼” to 2”. Valve ...
Econ Brand Valves
DN: 0.375, 0.5, 0.18, 0.25, 0.75 in
Pressure: 0 psi - 20,000 psi
Temperature: -26 °C - 204 °C
... NPT Connections with MAWP up to 15,000 PSI (1034 bar) Flow Pattern: 2-Way, 3-Way Switching, 3-Way Diverting Features Bidirectional trunnion style for optimal performance Three standard mounting options Options Pneumatic and Electric ...
Precision High Pressure
DN: 10 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 150 °C
... Stainless steel valve FPM shaft “o-ring” PTFE+15%GF ball seats BSP threaded end connections (SW and BW on request) NP63 Working pressure: 16 Bar* Fluid temperature: -20°C +150°C* Actuator temperature: 0°C +90°C Actuator ...
DN: 10 mm - 25 mm
... DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized steel sleeve: as selected ...
Ho-matic
DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C
... The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ductile iron and ...
EFSVALVES
DN: 100 mm
... Multi-way ball valves from Böhmer, with three or four passages up to DN 100, are versatile in the truest sense of the word. Our valves are used for a variety of purposes. In shipping, for example, they ensure the smooth ...
DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C
... PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three valves ...
Pressure: 28 bar
... The main functions of the Shut-Off Valve are to start or stop fluid within the particular circuit it is installed. Applications The Henry Technologies’ range of Globe and Angle Shut-Off Valves is used for isolation ...
the best suppliers