Threaded valves

DN: 0.375 in
Pressure: 10,000 psi
Flow rate: 7 us gal/min

... Controls surges by restricting flow if it exceeds 7 gpm. When flow subsides, valve reopens automatically. Has 3/8" NPTF male end to thread into return port of system control valve, and a 3/8" NPTF female ...

DN: 25 mm - 500 mm
Pressure: 10 bar - 50 bar

... actuated on/off valves. The ball valve meets ISO standards. The valve is available with threaded ends, welding ends or flanges. It is also possible to combine different types of ends. Somas ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 32 bar
Temperature: 180 °C - 205 °C

... Screwed Female End Body With Cylinder Actuator For On-Off, Mixing or Diverting Application Body and End Piece: Investment casted ASTM-A, 351CF8 (St.St. 304) /CF8M (St.St. 316). For control of steam air, hot water, oil gas, hydraulic oil. specially where ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 400 °C

... The CP-06 offer a wide array of needle valves that are specifically constructed to be applied with liquids that both posses high pressure and temperature service. Fabricated from AISI-36 stainless steel, these valves' ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

... Flow characteristic : equal percentage at 2-way/3-way valve linear at 3-way valve in bypass (VDI/VDE 2178) Leakage rate : < 0.01% from the Kvs, < 1% for bypass port leak-proof Connection : female thread ...

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 thermoplastic ...

DN: 100 mm - 200 mm
Pressure: 16, 10 bar
Temperature: 50 °C

... Resilient-seated gate valve system with a flexible and modular design for up to five flange components. Special distribution cross for four flanged connections, four house connections and one underground hydrant. Suitable for water distribution ...

DN: 8 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C

... Ball valves with internal and external threads, with cutting ring threaded joint, pressure gauge ball valves and measuring lead plug valves In the on/off operation for general industrial ...

Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C

... worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed for the rationalization ...

DN: 0.25 in - 2 in
Pressure: 400 psi

... Threaded, 2-Piece, Std. Port, Bronze Ball Valve, 400 CWP, Sizes: 1/4" to 2" (DN 8 to DN 50) ...

DN: 0.25 in - 2 in
Temperature: -10 °C - 50 °C

... A-EAL-BV3G Voltage 24V/DC ; Protection IP 65; Temperature –10°C bis +50° C BV3G: 3-piece ball valve with BSP parallel thread to DIN / ISO 228. Overall length to DIN 3202 Part 4-M3; (exceptions: "**"). L (= 24V) ...

DN: 25 mm

... Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female. ...

DN: 10 in - 16 in
Pressure: 0.1 MPa - 0.8 MPa
Temperature: 1 °C - 42 °C

... piston positions. “Totalizer” function tracks total amount of water treated. Audible Cycle Advance Alarm sounds if the valve is stuck in any position for more than 2 minutes. Self-charging capacitor keeps date / time of day for ...

DN: 25, 20, 15 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... pumping and all fluid applications Ball bib cock with nose connection Standard passage SEALS : PTFE ...

DN: 8 mm
Pressure: 10 bar
Temperature: -10 °C - 90 °C

... Diverter ball valve for panel, female threaded and hand wheel. ...

DN: 15 mm - 100 mm
Pressure: 20 bar
Temperature: -10 °C - 100 °C

... Body material Bronze Wedge material Brass PN (End) PN20 End BSP Female/Female Contact sealing EPDM Operating system Handwheel non rising stem ...

DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C

... development and manufacturing brass ball valves have lead to this new series. The valves can be used for generell heating circuits, as well as for many other applications, according to the pressure temperature diagram. ...

DN: 12 mm

... This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging from 8 - 50 ...

DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C

DN: 8 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C

... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide intelligent, ...

DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min

... Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit: the valve is open from the inlet to the ...

DN: 150 mm

... any effort. A large number of in and outlet connections can be provided: threaded BSP or NST-NH, or standardised couplings. Maximum working pressure: PN16 Valve type: ball valve Operation: by handwheel Material: ...

DN: 0.25 in - 4 in
Pressure: 40, 25 bar
Temperature: -10 °C - 80 °C

... Brass ball valve with stainless steel handle. Full bore. 3/4” - 1½” male/female - Full bore 1/4” - 2” female/female - Full bore 2 1/2” - 4” female/female - Reduced bore ...

DN: 0 mm - 10,000 mm
Pressure: 1 bar - 150 bar
Temperature: -40 °C - 60 °C

... >
Operation

• Unscrew the protective threaded cap before use.
• With the valve upright: connect the lower inlet thread to the gas cylinder; connect the side outlet thread

DN: 0.25 in - 3 in
Pressure: 0 bar - 63 bar
Temperature: -25 °C - 180 °C

... TECHNICAL INFORMATION1. Stainless steel full port ball valve, 2 pieces2. Thread ends according gas EN 10226-1 (EX ISO 7-1 e DIN 2999)3. Made of AISI 316 (CF8M)4. Ball seats PTFE + 15% G.F.5. Blow-out proof stem6. Viton ...