Threaded valves

DN: 1.25 in - 4 in
Temperature: 100 °C

... 3-way high flowrate vacuum valve VACUUM/VACUUM BREAKER valve when used with vacuum pumps DIVERTER VALVE when used with blowers Advantages • Rapid vacuum interception and interruption • Remote ...

DN: 25 mm

... Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female. ...

DN: 8 mm
Pressure: 10 bar
Temperature: -10 °C - 90 °C

... Diverter ball valve for panel, female threaded and hand wheel. ...

DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C

... development and manufacturing brass ball valves have lead to this new series. The valves can be used for generell heating circuits, as well as for many other applications, according to the pressure temperature diagram. ...

DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C

DN: 8 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C

... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide intelligent, ...

DN: 0.25 in - 4 in
Pressure: 40, 25 bar
Temperature: -10 °C - 80 °C

... Brass ball valve with stainless steel handle. Full bore. 3/4” - 1½” male/female - Full bore 1/4” - 2” female/female - Full bore 2 1/2” - 4” female/female - Reduced bore ...

Pressure: 0 psi - 125 psi
Temperature: -20 °F - 180 °F

... TAC Push Button Valve may be operated with a choice of four TAC Air Pilot Operators. Valves are miniature 2, 3 and 4-way, and available in 10-32 UNF, 1/8 and 1/4 pipe sizes. Thread Air Pilot Operator ...

DN: 0.125, 0.25, 0.375 in

... This hand pull valve is designed for efficient manual control in various industrial applications. It features a robust construction to ensure durability and reliability in demanding environments. The valve is easy to ...

DN: 0 mm - 10,000 mm
Pressure: 1 bar - 150 bar
Temperature: -40 °C - 60 °C

... >
Operation

• Unscrew the protective threaded cap before use.
• With the valve upright: connect the lower inlet thread to the gas cylinder; connect the side outlet thread

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 0.25 in - 3 in
Pressure: 0 bar - 63 bar
Temperature: -25 °C - 180 °C

... TECHNICAL INFORMATION1. Stainless steel full port ball valve, 2 pieces2. Thread ends according gas EN 10226-1 (EX ISO 7-1 e DIN 2999)3. Made of AISI 316 (CF8M)4. Ball seats PTFE + 15% G.F.5. Blow-out proof stem6. Viton ...

DN: 25 mm - 50 mm
Pressure: 16 bar

... Angle valve with threaded terminals for potable water or non-aggressive liquid systems. Flow regulation by rotation of the stem. Also available with counter-clockwise closing system. Vertical installation. - Materials: ...

DN: 0.5, 0.25 in
Pressure: 500 bar

... Shut-off valve for manual shut-off of the material line. Type: KH HD Ball cock high pressure FP001, FP015, FP045, FP045-T, FP050, FP050-T, FP200, FP200-T, FP200-S Technical Data Connection thread G 1/4" or ...

DN: 20 mm - 50 mm
Pressure: 16 bar

... ground applications sufficient draining for the valve has to be considered (e.g. drainage pit) Sealing system: Automatic secured drainage when valve is completely closed. No clearing when the valve ...

DN: 0.375 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 100 °C

... bore addresses the need of many users for more fl ow. The models are designed with 7,8 and 12 mm valve seat bores, which are commonly found in "and 1" valves. This allows a high filling capacity in a compact design. ...

DN: 5.5, 3 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C

... 2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Function principle: 2/2-ways Actuation type: manually Material of casing: Brass chromed Material of ball: Brass ...

Pressure: 10 bar - 63 bar
Temperature: 180, 150 °C

... to the valve, the system shuts down and the flow is interrupted. Ball valves are primarily preferred in places that open and close frequently or need to be opened and closed quickly. Ball valves are ...

DN: 0.25 in - 4 in
Temperature: -20 °C - 150 °C

... * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...

DN: 45 mm
Temperature: 180 °C

... Port size 2" BSP Female Thread (ISO 228/1) - Input. 2" BSP Female Thread (ISO 228/1) - Output. Pressure range Min. 0/Max. 150 Housing material Stainless Steel 316 Microcast (CF-8M). Piston - Stainless Steel 316. ...

DN: 0.5, 0.75, 1, 1.25 in
Pressure: 1.6 MPa
Temperature: 1 °C - 130 °C

... status. Then the room temperature will keep in the comfortable range. Valve thread size: G1/2、G3/4、G1、G1.1/4 Thread connection. Valve body could be installed first. Simple wiring. ...

DN: 4, 6, 8, 10, 12 mm
Pressure: 1 MPa
Temperature: 0 °C - 60 °C

... m Outer diameter of pipeline Φ 4 incidents When the rotary knob of the 3-way valve is closed, residual gas is discharged from side A (there is no exhaust port in the valve body, and it is discharged along the knob structure) ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C

... Large Flux, low resistance, no water hammer. Y type shape enlarged the flowing section, which could raise the flux by %30 and make flow more smooth. Super long working life, which help the stem adjust and lubricate itself automatically. On-Off actions ...

DN: 10 mm - 65 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C

... Body material: stainless steel Pressure:0-16bar Orifice:10-65mm Pipe size:screw-type welded-type Fluid Media: Air etc Application industry Beer beverage, disinfection equipment, rubber machinery, textile printing and dyeing, pharmaceutical, medical ...

DN: 40 mm - 700 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 70 °C

... INFINITY gate valve F4-F5 DN40-700 PN10/16 INFINITY gate valve _INIFINITY and its new wedge and stem technology ensures smooth functionality with outstanding low torque values. _New guiding system for ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way Ball Valve. ...

DN: 6 mm - 50 mm
Pressure: 0.6 MPa - 0.8 MPa
Temperature: -20 °C - 100 °C

... BVMF series brass ball valve offers reliable flow control with a 90° quarter-turn operation, ensuring low flow resistance, zero leakage, and fast actuation. Made from high-strength H58/H62 brass, it provides excellent corrosion resistance, ...

Pressure: 250 bar
Temperature: -40 °C - 140 °C
Flow rate: 22 l/min

... normally closed, proportional, poppet-type, screw-in hydraulic cartridge valve for blocking or load-loading applications. Operation:When de-energized, the HY-SP-08-20 acts as a check valve, allows flow from ① to ②, ...

DN: 0.375 in - 4 in
Pressure: 28, 35, 42 bar
Temperature: 185 °C

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C

... Brass gate valve Novo • - Non rising stem, solid wedge, screwed ends • - Used for water, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • - Max working ...

DN: 1 in - 2.5 in

... TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism. ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... the deluge valve to open. The Deluge system incorporates an emergency valve, bypassing the fire detection systems for manual operation. Designed for vertical or horizontal installation, a globe pattern, line pressure ...

DN: 15 mm - 50 mm
Pressure: 400 psi
Temperature: 80 °C

... . (15 to 50 mm) Description: DIRECT ACTING CONSTANT PRESSURE PUMP CONTROL VALVE - Reduces rapid pump cycling and maintains a pre-set operating pressure for wells. Threaded female x female connection. Features a low ...

DN: 20 mm - 63 mm
Pressure: 10 bar

... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness. ...

DN: 0.25 in - 4 in
Pressure: 68 bar
Temperature: 0 °C - 230 °C

... Stainless steel ball valve Elephant BV.T.Fp.316.230 986 psi, full port, threaded connection, with handle is used as shut-off valves in heat supply systems, water supply, steam, fuel systems with compressed ...

DN: 15 mm - 200 mm
Pressure: 4.5 bar
Temperature: -20 °C - 130 °C

... screw air compressors; 2. The minimum pressure valve has a check function, and the sealing element is FKM or PTFE, which is sensitive to check and reliable in sealing; 3. The minimum pressure valve spring has been ...

DN: 50, 40, 25, 20 mm
Pressure: 15 bar
Temperature: -20 °C - 80 °C

... outside, fittings are made of robust cast aluminium, painted in grey, with durable Nitrile gasket seals, pipe, fittings, and valves are available silicone-free. ...

Pressure: 64, 130 bar

... • Prevention of sticking-out of stem • Design of Inner Pressure-balance hole • Multiple Connection Screw Optional • Design Standard: ASME B 16.34,MSS SP-110 • Thickness: EN 12516-3 •Connection Screw: IS0228/1, DIN2999/259. BS21, ASME B1.20.1, JIS ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, BS, ASTM, JIS), threaded ...

DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C

... Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size) ...