DN: 0.125 in - 1.5 in
Pressure: 1 mbar - 670 mbar
Temperature: -20 °C - 120 °C
... used as safety valves on non-commissioned tanks or containers at high levels of vacuum and on vacuum cup lifting systems. The level of vacuum is adjusted by rotating the knurled bush in both directions. The fine thread ...
DN: 30 mm
... Valves with ball shutter Valves with ball shutters activate suction, creating vacuum in the cups on which they are applied, only when the load to be held activates the sealing shutter. They are made of an anodised aluminium ...
DN: 6 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: -40 °C - 185 °C
... Universal stainless steel globe
valve
The pneumatically actuated GEMÜ S40 globe
valve is designed for use in industrial applications and has body shapes such as angled and straight seat bodies. The
valve ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 10 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -40, 250 °C
... Valve with premium actuator for high performance and long service life
The GEMÜ 549 eSyDrive is an electrically operated 2/2-way angle seat globe
valve with a hollow shaft electric actuator. The eSyDrive hollow ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 60 °C
... Universal angle seat globe
valve with plastic handwheel
The 2/2-way angle seat globe
valve GEMÜ 507 has an ergonomically designed plastic handwheel and is manually operated. The
valve spindle is ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm
Temperature: -18 °C - 93 °C
... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate vacuum when ...
DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C
... Product description
Needle
valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these
valves are used in demanding hydraulic systems such ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 1,379 bar
Temperature: -73 °C - 232 °C
... manually closed or opened in either direction, WEH® needle valves reliably provide this function. The valves run smoothly and are highly durable because the valve needle is decoupled from the rotating ...
Pressure: 0.5 bar - 250 bar
Temperature: -20 °C - 200 °C
... screw-in valves into internally threaded bores using an Allen key. The TVR400 valves are made of high-quality stainless steel, making them very durable and wear-resistant. They are also particularly low-noise ...
DN: 8 mm - 15 mm
Pressure: 320 bar
Temperature: -60 °C - 530 °C
... Temperature: Media temperature: -60 °C to +210 °C; Application from -60°C up to +530°C Connections: - Pipe thread acc. ISO 228-1 - NPT thread acc. ANSI B1.20.1 - Socket weld connection Accessories: - Limit switch - ...
Schubert & Salzer Control Systems GmbH
DN: 8 mm - 15 mm
Pressure: 320 bar
Temperature: -60 °C - 210 °C
... The low flow valve type 7242 with electric actuator is ideal for precise control at high pressures and very low flow rates. As a safe on/off valve, the low flow valve can be used especially for high pressures. ...
Schubert & Salzer Control Systems GmbH
DN: 15, 8 mm
Pressure: 320 bar
Temperature: -60 °C - 530 °C
... Temperature: Media temperature: -60 °C to +210 °C Application from -60°C up to +530°C Connections: - Pipe thread acc. ISO 228-1 - NPT thread acc. ANSI B1.20.1 - Socket weld connection Accessories: - Limit switch - ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... Pneumatically actuated diaphragm valve with male ends, metric series. Normally Closed function. The DK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 100 °C
... way DUAL BLOCK® ball valve with female ends for solvent welding, ASTM series with electric actuator 24 V AC/DC “L” ball. FIP has developed a TKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic ...
FIP - Formatura Iniezione Polimeri
DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in general Valves ...
ITV
DN: 10, 7, 8, 12 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C
... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Handle made of PA66 O-ring made of NBR70 Thread Cyl. thread, DIN EN ISO 228 Con. ...
ITV
DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C
... Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials series 20, 21, 30, 31, DVGW series 40,41, Ball- valve with air vent Thread Cyl. ...
ITV
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
... Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the system by reduce ...
Elite Line Industrial Corp.
DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C
... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, this will cause ...
Elite Line Industrial Corp.
DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C
... Presssure Sustaining Valve, also known as Back Pressure Valve, or Back Pressure Sustaining Valve, is a valve that maintain required pressure of inlet port by opening only as much as required. What ...
Elite Line Industrial Corp.
... Weir-type diaphragm valve to DIN/EN with flanged ends or threaded socket ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator ...
DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, ...
DN: 0.25 in - 2 in
Pressure: 800, 1,000 psi
Temperature: -5 °C - 175 °C
... parts ASTM A351 CF8M / 316 Connection Type: Thread Locking Device: Valve operated locking in open or closed position Working Pressure Limited: 1000psi (70kg/cm2) for 800psi (56kg/cm2) for 1-1/4”~2”; Valves ...
DN: 6 mm - 15 mm
Pressure: 63 bar
... Technical Data Reduced Port Valves Inspected & Tested according to API 598 Standard Investment Casting Design: ASME B16.34 Material:ASTM-A351-CF8M , ASTM-A351-CF8 Working Pressure:1000 WOG / PN63 End Connections:DIN2999 / ...
DN: 0.25 in - 1 in
Pressure: 10,000 psi
Temperature: -50 °C - 230 °C
... BAR STOCK Body Material: SS316 Size Ranging: %B~r (DN8-DN25) End Connections: PF / BSPT / NPT With T Handle Opération ...
DN: 0.25 in
Temperature: -30 °C - 80 °C
... Flow control 90° (bidirectional) Fluid Temperature: -30°C (-22°F) to 80°C (176°F) Female Thread: 1/4 ...
DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F
... Pressure piloted 3 Way Valves apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point (also called “On” pressure), the internal ...
AIR Logic
DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F
... connection available on the exhaust port. When the valve trips, the supply is open to the output port and the exhaust is closed. There is no connection available on the exhaust port. The valve will remain in this ...
AIR Logic
DN: 0.625, 0.125 in
Pressure: 22 psi - 116 psi
Temperature: 40 °F - 120 °F
... port is open to the output port. When the valve trips, the supply is shut off and the output port is vented through the exhaust to atmosphere. There is no connection available on the exhaust port. The valve will remain ...
AIR Logic
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C
... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / VITON Circumstance Temp: -10°C to 70°C Actuator Information > - Life: More than ten million cycle > - Other Technical Data: Available Available on request Adjust Stroke Limiter ...
UFLOW AUTOMATION
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Body Material: - SS ASTM A351 Grade CF8 / CF8M > Seal: - PTFE / PEEK / VITON Actuator Information > - Cover: Nylon Glass-Filled (Corrosion résistive) with SS Liner > ...
UFLOW AUTOMATION
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / PEEK / VITON Cover - Nylon Glass-Filled (Corrosion résistive) with SS Liner Plate - NBR / VITON Life - Three Million Cycle Tested Other Technical Data - Available on Request - Adjust ...
UFLOW AUTOMATION
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may open gradually ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... EXCESSIVE FLOW VALVE The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed closing completely ...
Tecnidro
DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C
... MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316 ...
BENE INOX
DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C
... 1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316 ...
BENE INOX
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -29 °C - 175 °C
... 2 PIECES ATEX BALL VALVE - FEMALE / FEMALE BSP OR NPT - FULL BORE - LOCKABLE HANDLE - STAINLESS STEEL 316 ...
BENE INOX
Pressure: 16 Pa
Temperature: -10 °C - 180 °C
... PP1020 Series Normally Closed ; PP1021 Series Normally Open Advantage of TORK Pneumatic Piston Valves ● Less pressure drop than the globe valves ● Short open-close time ● High flow rate ● Body and actuator ...
DN: 10 mm - 100 mm
Pressure: 6 bar
... consumption! Air operated Pinch Valves with Internal Thread Connection - VMC Series The air operated pinch valves of the VMC series are available in the nominal diameters of DN10 to DN100. They are ...
AKO ARMATUREN
DN: 10 mm - 50 mm
Pressure: 4.5, 6 bar
... AKO air operated Pinch Valves with Internal Thread Connection - VMP Series The air operated pinch valves of the VMP series are available in the nominal diameters of DN10 to DN50. They are designed ...
AKO ARMATUREN
DN: 10 mm - 50 mm
Pressure: 6 bar
... the VM series pneumatic pinch valves can also be offered with alternative individually customised connections. For information on advantages of AKO pinch valves and their functions, see air operated pinch valves. Pinch ...
AKO ARMATUREN
DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic materials • Connector ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing ...
DIVATEC,SL
DN: 2 in - 6 in
Pressure: 50 mbar
Temperature: -20 °C - 60 °C
... Male threaded emergency vent is normally used to protect the aboveground storage tank from overpressure. It has 50 mbar pressure relief. It even helps to reduce the evaporation of fuel and environmental pollution. material: - ...
DN: 50 mm - 150 mm
Pressure: 0 psi - 60,000 psi
... overview
The normally closed air-operated
valve is rated to 60,000 psi and designed for remote pneumatic actuation with spring-return fail-safe operation. Its 316 stainless steel body and UNF
threaded connections ...
DN: 0.5 in - 1 in
Pressure: 0 bar - 19 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
Hyperr Valves Private Limited
DN: 0.5 in - 6 in
Pressure: 0 bar - 60 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
Hyperr Valves Private Limited
DN: 0.5 in - 6 in
Pressure: 0 bar - 19 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
Hyperr Valves Private Limited
Pressure: 7 bar
Temperature: -10 °C - 100 °C
Flow rate: 0 l/min - 250 l/min
... Product Summary
The WL 2832 proportional air
valve is engineered for precise airflow and pressure control in medical devices. Adjustable via solenoid current, it provides smooth, infinitely variable regulation with fast response ...
Pressure: 0.2 bar - 8 bar
Temperature: 1 °C - 75 °C
Flow rate: 12, 17, 35 l/min
... Product Overview
A urinal flush
valve designed for commercial and public restroom systems to control flushing cycles, reduce water consumption and provide reliable performance across variable inlet pressures. Available in manual, ...
DN: 6 mm - 6 mm
Pressure: 1 bar - 1 bar
Temperature: -10 °C - 100 °C
... Overview
The WL3050 double pinch
valve is a tube-control
valve that regulates liquid or air flow by mechanically compressing a flexible tube. The fluid never contacts the
valve mechanism, ensuring ...
DN: 6.35 mm - 101.6 mm
Pressure: 20.7 bar - 69 bar
... 2IN-L-PORT-BARE-SHAFT-
THREADED | 1 1/2" | L-Port | 800 PSI |
Threaded | £440.90 (example shown on page)
V33-123-1-1-2IN-L-PORT-W-HANDLE-
THREADED | 1 1/2" | L-Port | 800 PSI |
Threaded ...
MARSVALVENOK
DN: 6.35 mm - 101.6 mm
Pressure: 0 bar - 68.9 bar
... Overview MARS Series 50 is a family of two-piece ball valves offering flanged and fire-safe variants with multiple end connections, seat materials and locking options. The series includes 176 listed models with sizes, operating ...
MARSVALVENOK
DN: 6.35 mm - 76.2 mm
Pressure: 68.9 bar
... Overview
Ball
valves from the MARS Series 20-20. 60 models available with sizes, end connections, lock options and UK prices listed on the series page.
Representative models (examples)
- V20-20-1-1-2IN-BSPP-W-LOCK
MARSVALVENOK
DN: 0 mm - 10,000 mm
... Way Foot Pedal Valve BSP 1/4" — Standard — £22.97
DN: 0 mm - 10,000 mm
Pressure: -1 bar - 20 bar
Flow rate: 18 l/min - 5,000 l/min
... Steel; IP52
Technical specifications
- Series: FC Series
- Valve type: Stepper-controlled proportional needle valve
- Repeatability: ±0.1% F.S.
- Control signals: 0–10V,
DN: 12.7 mm - 25.4 mm
Pressure: 0 bar - 689.5 bar
Temperature: -50 °C - 200 °C
... Standard hex head bleed
valve; internal hex (hex socket) bleed
valve.
Application Scope
Draining, venting and pressure relief for ball
valves, gate
valves, wellhead trees, ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
... Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed for electrolysers - ...
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 150 °C
... the diameter of the pipe High flow capacity 2. Pneumatic actuator integrated in the valve Space saving (-60%) and reduced costs compared to an automated valve 3. Piston with chemical nickel plating Lower wear ...
OMAL Spa
DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
... FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand of miniaturization. Many ...
AIGNEP
DN: 3 mm - 12 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn resolution Non-rotating ...
Mass Flow ONLINE BV
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,000 °F
... This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating ...
Badger Meter
DN: 6.35 mm - 38.1 mm
Pressure: 700, 1,034 bar
... Design Threaded body Automation-ready with standard ISO 5211 connecting plate Total HermetiX Integrity package with: ISO 15848-1 and API 641 emission standard certificated design ISO 10497 and API607 fire-safe standard certificated ...
HABONIM
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -50 °C - 180 °C
... Two-piece stainless steel ball valve with screwed ends. Low pressure loss due to full and extremely smooth passage. Blow-out proof switching shafts are inserted from the inside. The ball valve does not require any maintenance ...
GEFA Processtechnik
DN: 0.375 in - 2 in
Pressure: 0.2 bar - 20 bar
Temperature: -60 °C - 225 °C
... resistant stainless steel provides a solution. The sealed and gas-tight design covers an even wider application range. The valves can be conveniently adjusted or aligned using the external adjustment, which means that perfect alignment ...
Goetze KG
DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C
... The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific ...
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
... The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 15 mm - 50 mm
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 260 °C
... Thread end connection resilient seated 2 piece ball valve An economical manual operated valve rated to 138 bar/2000 psi Features Robust engineering design High quality Benefits Long service life Bubble ...
Metso Automation
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
... Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or nitrogen control ...
DN: 0.5, 0.75 in
Pressure: 10.3, 6.9 bar
Temperature: 149 °C
... Protection Valve is installed into the lowest point within the heated system. The thermal actuator is tee’d into the NPT threaded opening with adequate internal clearance to monitor the water temperature. When the water ...
Thermomegatech
DN: 20 mm - 80 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 60 °C
... modulating valves Modulating valves LMV are used in combustion processes that require linear adjustment of air or gas flow. The flow varies proportionally to the opening angle of inner mechanism, therefore flowrate ...
DN: 50 mm - 75 mm
Pressure: 6 bar
Temperature: 0 °C - 60 °C
... • Solvent inner connection to or solvent outer connection to pipe through end connectors. • Handle indicater of flow direction. • Closing pump position is not allowed under pressure. • Excellent flow characteristics. • Visual position indicator. • ...
Cepex SER
the best suppliers