Double valves

Pressure: 15,000, 10,000 psi
Temperature: -18 °C - 204 °C

Parker Autoclave's 6DB Series double block and bleed ball valves have been designed to provide superior quality for maximum performance within a variety of end connections. Some of the more unique design ...

DN: 10, 6.4, 4.8 mm
Pressure: 690 bar
Temperature: 538 °C

Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted directly to the vessel or process pipe Features -One-piece ...

DN: 40 mm - 800 mm
Pressure: 16, 25 bar
Temperature: 80 °C

... •Normally Open or Normally Closed main valve Double chamber •Full powered closing •Low throttling noise •Non-slam closing characteristic •Protected diaphragm External installation •Easy access ...

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 450 °C

Double Plate Gate Valve refers to Australian "Armstrong" valve technology and has been successfully developed by researchers for many years. The valve is replaced by ...

Pressure: 0 bar - 400 bar

Sunfab Double By-Pass is an unloading valve for the SCPD 56/26 pump providing remote switching between idling and operation. The By-Pass valve is used in installations where the power ...

DN: 0.375 in - 4 in
Pressure: 16, 10 bar
Temperature: -10 °C - 110 °C

... 16 bars up to DN 2 and 10 bars over. This is an easy handling material because it is double gated and can close quickly. SPECIFICATIONS : • - Full bore • - Double gâte • - Quick dosing • - Female ...

Pressure: 240 bar

... one. Therefore, a four valve block, as an example, can actually serve anywhere between four and eight bearings. DM series valves always have one discharge port per valve section located ...

DN: 15, 22 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 130 °C

Fixed orifice DZR brass double regulating valveDiameters from DN015 - ½" to DN050 - 2"Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)Olive & nut kit (O/N) for European copper tubing (EN1057) on request: ● ...

DN: 90 mm - 698 mm

... Standard construction: - Anti-blowout stem - Antistatic device (between ball and stem) - Bidirectional pressure - Double body seal - Double block and bleed - Drain plug on the body - Vent plug ...

DN: 2 mm - 32 mm
Temperature: -60 °C - 350 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

... Stem Optional Seat: EPDM, NRB, VITON, PTFE Double Shaft (2"~12") One Piece Shaft (14" and above) Position Indicator ISO 5211 Top Flange The NUTORK double offset butterfly valve ...

DN: 2 in - 10 in
Temperature: 29 °C - 220 °C

The Dual Seal Double Block & Bleed valve is a soft seated ( 0 Leakage ) single valve that simultaneously blocks both the upstream and downstream flow while allowing the user to verify ...

DN: 300 mm - 1,400 mm
Pressure: 1,000,000 Pa - 1,600,000 Pa
Temperature: 200 °C

... bushings, which provide double sealing of the axles in both directions and protect the axle shafts from the working medium. The axle shaft construction is less vulnerable to corrosion, as a result, the service life of ...

DN: 15 mm - 200 mm
Temperature: -20 °C - 185 °C

... : - -20°C~185°C Ball valve, the opening and closing member (sphere) is driven by the valve stem and rotates around the axis of the ball valve. It can also be used for fluid regulation ...

DN: 50 mm - 300 mm

... long service life. 2.Two side sealing can realized due to double plate structure of the pneumatic ceramic double disc gate valve. 3.In the process of opening and closing ,the valve ...

DN: 16 in
Pressure: 3,000 psi - 15,000 psi
Temperature: -75 °F - 250 °F

... design, easy for stem seal replacement in pressurized condition. Grease injection valve on one side of bonnet is easy to add grease. Low open/close torque Double flange, threaded-end or special connections

DN: 50 mm - 600 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -30 °C - 650 °C

... high performance valves are of double eccentric design and are widely used in chemical, petrochemical, power, steel plants and common industrial applications as well as Shipbuilding industries.   PROVAL ...

Pressure: 10,000 psi
Temperature: 0 °C - 49 °C

... Model DV Series Dump Valve is a pneumatically-operated control valve for instantly releasing the flow of liquids under pressure in a hydrostatic pressure system. Designed for operator safety and to reduce ...

DN: 300 mm - 1,800 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 50 °C

EVOLUTION double eccentric butterfly valve TALIS presents the essence of an efficient butterfly valve designed for when economy is a high priority in standard applications. With reduced ...

DN: 50 mm - 600 mm

Econaxe L201 Short pattern, tapped or drilled throug holes Construction - High performance double eccentric butterfly valve Body type - Lug wafer type End connection - EN 1092 PN 6, 10, 16 ASME ...

... Vacuum (Pressure) Ball Valve Description: Guq series pneumatic vacuum (pressure) ball valve is applicable to connect or cut off the medium flow in the pipeline in the vacuum system. Guq series pneumatic ...

DN: 6.35 mm - 19.05 mm
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 80 °C

DOUBLE OVERCENTER VALVE FOR OPEN CENTER VBCD DOUBLE COUNTERBALANCE VALVE NOT COMPENSATED FOR IN-LINE INSTALLATION With the Oleoweb VBCD counterbalance valves ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

DN: 200 mm - 1,200 mm
Pressure: 10, 16, 6 bar

Double Eccentric Butterfly Valve Body Material: Ductile Iron, Carbon Steel, Stainless Steel,etc. Disc Materials: Ductile Iron, Carbon Steel, Stainless Steel etc. Sealing Material: EPDM, NBR (Buna-N), ...

DN: 6.35 mm - 50.8 mm

The Econ® E55 Series is a one piece, double reduced port ball valve with NPT ends. The E55 is rated to 1000 WOG and is available in sizes ranging from ¼” to 2”. Valve bodies are made ...