Dual plate check valves

DN: 50 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C

With a cast iron body that integrates a bronze swing, this item is undoubtedly one of the finest on the market. It comes with a spring and pin made entirely of stainless steel and an NBR gasket.The device is easily assembled by anyone ...

DN: 50 mm - 1,500 mm
Temperature: -254 °C - 593 °C

Dual plate, spring loaded, wafer style design for the protection of gas or liquid piping systems • General service piping systems. Industry Standards • ASME B16.1, B16.5, B16.24, B16.34, B16.47 and ...

DN: 40 mm - 600 mm
Pressure: 10 bar - 25 bar

DN 40 - 600 PN 10 - 25 Body: EN-JL1040, EN-JS1030 Coating: Epoxy For water in plants, buildings and valve chambers. Wafer-type double wing version Extremely short type Simple and robust design Can be used in horizontal ...

DN: 2 in - 24 in
Pressure: 200 psi

... InternationalTM Model 910WB-LF Cast Iron Wafer Check Valve provides full flow capabilities. The Model 910WB-LF Wafer Check Valve can be reliably installed in plumbing ...

DN: 50 mm - 600 mm
Pressure: 10 bar - 25 bar
Temperature: -10 °C - 180 °C

Body material Stainless steel Swing material Stainless steel PN (End) PN10/16 End Between flange Contact sealing FPM

DN: 50 mm - 600 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 180 °C

The 371 series of dual-plate check valve is integrated with an anti-abrasion stainless steel spring . It is built with a vulcanized body gasket. A hoisting eye ranging ...

DN: 40 mm - 1,200 mm
Pressure: 150 bar
Temperature: -20 °C - 120 °C

A check valve, clack valve, non-return valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through ...

DN: 50 mm - 600 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 150 °C

Working Pressure and Temperature Working pressure PN16/Class125. Température from -10*C to 120*C for EPDM seat. Température from -10*C to 82*C for NBR seat. Température from -10^ to 150*C for Viton seat. Flange Type EN 1092-2 PN10/PN16, ...

DN: 50 mm - 1,200 mm
Pressure: 20 bar - 420 bar
Temperature: -46 °C - 593 °C

Dual plate check valve Product type Switch valve Product description Dual plate check ...

DN: 50 mm - 300 mm
Pressure: 16, 10 bar

The KTN 56B is our wafer ends double disc check valve. Made of cast iron GG25, The range of dimensions is from DN 50 to DN 300. The pressure range is PN10 / 16. PTFE bearings. Double disc, spring and ...

DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C

... Make sure to install a minimum of 5 x nominal diameter of straight pipeline in front of and behind the dual plate check valve. Do not install the valves ...

DN: 50 mm - 1,000 mm

Use : Check valve intended for networks for clean water distribution, filtration system, fire protection networks, irrigation. It ensures the protection of pumps against flow inversion. Horizontal or ...

DN: 40 mm - 1,400 mm
Pressure: 10, 16, 25 bar

STANDARDS OF MANUFACTURE EN 1074-3 CHECK VALVES EN 558 S16 FACE TO FACE MATERIALS BODY EN GJL-250 CAST IRON EN 1561 EN GJS-400-15 DUCTILE IRON EN 1563 A216 WCB CARBON STEEL ASTM A216 AISI316 ...

DN: 50 mm - 1,350 mm
Pressure: 0 bar - 10.3 bar
Temperature: 0 °C - 178 °C

Class 125 Cast Iron Sure Check™ Valves Size: 2 to 54 in. (50 to 1350mm) Description: Designed for liquids and gases where flow reversal can cause surge and water hammer. Elastomer seats provide bubble-tight ...

DN: 25 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -196 °C - 550 °C

Aluminium Bronze Check Valves Valve Body materials: aluminium bronze Valve Manufacturing standards: API, ANSI, BS, DIN, JIS Valve Connection: wafer, lug, flanged

DN: 0.5 in - 60 in
Pressure: 16 bar - 420 bar

Dual Plate Check Valve Supplier: Dual Plate Check Valves, 1/2-60 Inch, Class 150-2500 LB, PN16-PN420, ...

Vatac wafer Dual Plate Check Valves designed and manufactured strictly to International Standards API 6D, API 594, ASME B16.34 or Equivalent, » Design & Manufactured ...

DN: 50 mm - 400 mm
Pressure: 16, 25, 40, 64, 100 bar
Temperature: -20 °C - 200 °C

Flapcon® CV10 Series spring double check valve design is manufactured to withstand high operating pressures. The discs are opened 85 ° to provide positive closing. Sealing materials can be changed for ...

DN: 50 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 180 °C

... position. Travel of the disc from the fully open to the closed position is smaller than in single plate check valves,therefore the response of the valve to retarding ...

Dual Plate Check Valves The dual plate check valve is one of the most compact check ...

Pressure: 10, 16 bar

DESIGN Dual plate check valves to be mounted between tow flanges according to EN 1092-1 Type 11 form B - PN10/PN16. FACE TO FACE EN 558-1 row 16 PRESSURE RANGE DN50 - ...

DN: 40 mm - 600 mm
Pressure: 3, 6, 10, 16 bar
Temperature: -20 °C - 150 °C

The valves in series D6 are dual-plate wafer check valves, which are manufactured in accordance with the most severe product norms, and in conformity ...