Fans

Air flow: 3.28, 2.36, 2.97 m³/min
Rotational speed: 6,400, 5,800, 4,650 rpm
Noise level: 47, 50, 40 dB

... /24/48 V rated voltages. The broad lineup of fans enables you to choose the right fan best suited to your applications. (1) Based on our own research as of November 13, 2023, conducted among axial ...

WB is a plenum box for supply air intended to achieve a stable flow to rectangular front plates or grilles. WB is equipped with an adjustment damper and pressure measuring device. The plenum box can be connected from the side or the back. ...

Air flow: 4.6 m³/h
Rotational speed: 12,000 rpm
Noise level: 23 dB

ebm-papst axial fans are suitable for high air performance with medium pressure increase. The air flows through the fan blades in parallel with the axis of rotation. ebm-papst can supply a wide range ...

Air flow: 1,206 m³/h - 1,465 m³/h
Noise level: 88 dB

... OSHA; plated steel • Easily attach 8” duct (203 mm) to inlet & outlet • Glass-reinforced, polyester resin, spark-resistant fan blade • Reversible, locking, inlet flange for ducted and non-ducted applications • 60 ...

Air flow: 0.42 m³/min - 9.9 m³/min
Rotational speed: 3,000 rpm - 8,000 rpm
Noise level: 28 dB - 49 dB

... VDC axial flow fans have been designed to deliver the best in ventilation and cooling technology. With five different models (standard, alarm, long-life, variable flow and splash proof) to choose from, we guarantee you ...

... and outlet deflector The Woods Induction Thrust range is the super low profile car park ventilation and fire safety fan. Induction fans use a centrifugal blower with factory fitted inlet bell mouth & ...

This rotor can do both. The HUgo from Klingenburg transfers sensible and latent heat (i.e. energy bound up in moisture) simultaneously and sets new standards in terms of performance, hygiene, quality and reliability. Effective in Warm, ...

... weight, portable design and fan angle adjustable. Power (Max) 35W Ion balance ±5V Output voltage ± 5000 VDC Ozone generating amount Lower than 0.01 PPM (measured at 15 cm in front of the ...

Air flow: 7.36 ft³/min - 200.9 ft³/min

... and function types. A number of ball bearing fans are in stock and available for purchase online, however Aavid manufactures hundreds more options as well as custom fans and fan systems. All ...

Air flow: 0.2 m³/min - 6 m³/min

AC fan motors driven by AC voltage rotate fans to cool the inside of industrial machines and other equipment instruments and exhaust the heat outside. AC fan motors use ball bearings ...

Air flow: 60 m³/h - 90 m³/h

Lowest power consumption of only 5 Watt (at vol. = 75 m3/h). Extremely quiet due to the new ultraSilence® technology; just 25 dB(A)* (at vol. = 75 m3/h). Achieves a volume/pressure of 60 m3/h air flow at 31 Pa. Maximum air flow 90 m3/h, ...

Air flow: 1,250 m³/h - 95,000 m³/h

Use : Draws fresh air in and expels smoke. Designed for use in commercial and industrial buildings. Description : Short (standard) or long (optional) galvanised steel casing Multiblade aluminium impeller with adjustable-pitch ...

... keep temperatures consistent from floor to ceiling. The XL3 Fan is a program of large, high-volume/low-speed (HV/LS) ceiling fans, offering big benefits over high-speed ceiling or floor fans, ...

Air flow: 0 m³/h - 4,000 m³/h

ACI’s most established and comprehensive range of curved forward bladed centrifugal fans. These fan units are available in a variety of designs including 1 and 3Ph; 400Hz; and ATEX/CSA rated versions. ...

Air flow: 5,500 m³/h - 30,000 m³/h

... HVAC and air conditioning Standard requirements for flow fans; 7) Product advantages: ensure the characteristics of high-efficiency axial flow fans for air-conditioning systems, and the change in fan ...

Air flow: 195 m³/h
Rotational speed: 2,480 rpm
Noise level: 37 dB

... Product description Standard model •On/off via light switch or separate switch. •Speed controllable. • 1-level small room fan for ventilating the exhaust air rooms. • Suitable for continuous operation. • Standard ...

Diameter: 900 mm - 1,600 mm

... galvanized steel construction • Standard versions with diameters from 900mm to 1.600mm and powers up to 90kW. The JET series fans are available in both straight and angled version for the best compromise between size, ...

Air flow: 15,000 m³/h

Ceiling fans for reducing energy costs Thermal dynamic pushes heat upward. Result: Unused quantities of heat dam up near the ceiling. With the REMKO DVL 140 ceiling fan, this lost heat potential can ...

Air flow: 1,000, 1,450 m³/h
Noise level: 76, 83 dB

... where forced ventilation or aspiration is required. Construction: Body in steel sheet with anti-corrosion epoxy coating. Fan in galvanised steel sheet. Two threaded holes M20x1.5.

Air flow: 2,900, 4,300 m³/h

• Stationary Exhaust Fan volute with acrobat arm. • It is used in workshops where there is no need for filters and space restrictions. • Fully compliant with European machinery safety regulations. • Designed for extracting ...

Radiators for engines from 15 kW to over 1000 kW. Combicooler. radiator-intercooler CAC - oil cooler

Air flow: 12 m³/h - 930 m³/h
Rotational speed: 2,500 rpm - 6,850 rpm
Noise level: 27 dB - 73 dB

... mounting •EMC versions are available New Filter Fans The successful LV/GV series has been improved and redeveloped. The main features are the new design, some detail revisions, the IP 55 solution, new fans ...

Air flow: 6,200 m³/h

The axial air stream fan AIR 1 is designed to cool power units and special sections of the vehicle. Its four swivelling, rubber-tired fixed castors provide flexible and uncomplicated steering. PRODUCT DETAILS / SCOPE ...