Air flow: 200 m³/h - 3,000 m³/h
Diameter: 130, 250 mm
Rotational speed: 2,850 rpm
... single suction centrifugal fan in painted steel metal with galvanized blades, suitable for the extraction of air with low concentration of dust. The particular low air flow and low pressure allow a wide range of use of EV fans ...
Air flow: 540 m³/h - 19,000 m³/h
Diameter: 200 mm - 500 mm
... Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction fan ...
Air flow: 470 m³/h - 17,000 m³/h
Diameter: 250 mm - 630 mm
... Centrifugal fans with backward curved blades in thick steel sheet metal Extraction of air with a high volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction fan is ...
... Water Cooling Tower fans were devided into three types, fixed type fan, the cross type fan, and the wing type fan.The wing type fan include the four fans ...
Air flow: 20,700 m³/h - 36,700 m³/h
Noise level: 64 dB
... warehouses, farms, greenhouses, etc. The equipment consists of a structure made of galvanized steel and incorporates a helical fan with overpressure shutter with an automatic opening system. In addition, it incorporates supports ...
MET MANN
Air flow: 20,700 m³/h - 36,700 m³/h
Noise level: 64 dB
... This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Structure and overpressure slats in galvanized steel to avoid premature corrosion. - ...
MET MANN
Air flow: 69,000 m³/h
Diameter: 1,400, 900 mm
... Ceiling fans to cool in summer and save in winter DVW ceiling fans allow them to be used to ventilate in the summer and recover the stratified heat on the ceiling in winter, using the fan in winter ...
MET MANN
Air flow: 208 m³/h
Diameter: 60 mm
Rotational speed: 2,540 rpm
... The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length 240/300/360 mm depending ...
TECSYSTEM srl
Air flow: 240 m³/h
Diameter: 60 mm
Rotational speed: 2,350 rpm
... The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length 240/300/360 mm depending ...
TECSYSTEM srl
Air flow: 280 m³/h
Diameter: 60 mm
Rotational speed: 2,200 rpm
... The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length 240/300/360 mm depending ...
TECSYSTEM srl
Air flow: 3,180 m³/h - 44,430 m³/h
Diameter: 470 mm - 1,340 mm
Rotational speed: 385 rpm - 1,460 rpm
K and AC air circulators are available in different versions, with diameters ranging from 18" to 53". Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel for maximum corrosion resistance. Ideal for use in ...
Air flow: 9,600 m³/h - 52,500 m³/h
Diameter: 638 mm - 1,385 mm
Rotational speed: 393 rpm - 942 rpm
K air extractors are available in several versions, with diameters ranging from 26" to 56", direct-drive, belt-driven or cone-driven. Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel for maximum corrosion ...
Air flow: 2,000 m³/h
... •High power thanks to the possibility given by hydraulic motors to give a high speed to the fan •Hydraulic motor has no exhaust so can be placed directly in closed ambient •Absence of electricity makes it implicitly safe, insensible ...
Air flow: 2,100 m³/h
... •Can be power by common home electric sockets or from small generators •Electric motor has no exhaust so can be placed directly in closed ambient •Quiet, no vibration, minimal maintenance need • Can be used in many positions or in the normal upward ...
Air flow: 2,100 m³/h
... inlets in just a few moments and without the need for tools thanks to the exclusive quick eyelet system •The volute and the air fan can be washed without problems Practical centrifugal ventilator/aspirator with gasoline engine. Powerful ...
Air flow: 120 l/min
Diameter: 24 mm
Rotational speed: 26,000 rpm
... Tube fan with high airflow, economic motor and integrated power electronic. Compared to a flat fan, the Micronel D-Line offers much higher pressure and still high volume flow at the same time. Typical applications are ...
Micronel
Air flow: 313 l/min
Diameter: 30 mm
Rotational speed: 21,420 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly high demand ...
Micronel
Air flow: 492 l/min
Diameter: 34 mm
Rotational speed: 21,370 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly high demand ...
Micronel
Air flow: 2,500 m³/h
Noise level: 72 dB
... • The JustAir Fan Turbine is the ideal solution for getting exhaust fumes outside from difficult-to-reach places while saving on space. It wins people over thanks to its low headroom design and low weight. The fan is ...
Air flow: 975 m³/h - 57,825 m³/h
Diameter: 10 mm - 19 mm
Rotational speed: 735 rpm - 2,920 rpm
... industrial fan with forward-bladed impeller. For high flow rates of clean or slightly dusty air, fumes and vapors. Maximum air temperature: 60°C;with cooling fan 300°C. Special constructions on request. High efficiency ...
CORAL
Air flow: 147.5 m³/h - 925 m³/h
Rotational speed: 2,760 rpm - 2,910 rpm
... Centrifugal fan with forward curved blades or open blades for low flow rates and medium and high heads. Suitable for exhaust gas, flue gas and granular material suction. Direct-coupled execution only. Maximum air temperature: 60°C. Special ...
CORAL
... The ET extraction tower is normally used to draw in large volumes of air with low pressures. Its small size and light weight facilitate installation directly on roofs, either free suction or connected to flues. Backward-bladed extraction tower ...
CORAL
Air flow: 13,600 m³/h - 72,400 m³/h
Diameter: 660 mm - 1,752 mm
Noise level: 65 dB - 74 dB
... closed environments Technical features of axial air extractors MTV G: - Very high air flow - 6-blade stainless steel fans - System for easy disassembly of the engine - Venturi mouthpiece in moplen - Patented centrifugal opening ...
... EXHAUST FILTER/ fan module according to NFX 15-211 norm ( Filter not included ) ...
Air flow: 100 m³/h - 13,000 m³/h
... Metal sheet steel fan complete with inlet and outlet flanges ...
Air flow: 0 m³/s - 23 m³/s
... Filter fan FPI size 1 (92 x 92 mm) for air conditioning enclosures and casings. Configuration: FPI - airflow direction "in" (standard version: blowing). Optimum air conditioning for your enclosure: The Filter Fan Plus ...
STEGO
Air flow: 90, 75 m³/h
Diameter: 100 mm
Rotational speed: 2,650, 2,250 rpm
... Mini fan MiniVent M1, standard model with two speeds With the awarded design the MiniVent M1 integrates itself everywhere harmoniously, also in demandingly designed rooms. The compact and attractive designed facia avoids the view of the ...
Helios Ventilation
Air flow: 420 m³/h - 620 m³/h
Noise level: 63 dB - 64 dB
... limited space on the front and side panels. According to the ambient conditions these units can operated with fan (forced air) or without a fan (natural air convection). TP Series roof exhaust units are available with ...
Fandis
Air flow: 200 m³/h - 750 m³/h
Diameter: 108 mm - 200 mm
... ECOFIT Single inlet centrifugal fans AC single phase motor Forward impeller galvanized steel or plastic, Impeller diameter of 108 up to 200mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Plastic, ...
ROSENBERG VENDÔME
... every one of our fans is an eye-catching centerpiece. But if you’d like your Powerfoil X3.0 to be something other than the standard silver and yellow, upgrade with any of our 8 classic colors, or specify one of your own. We can paint ...
Big Ass Fan
... Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred thanks to their high suction power and their ability to serve for a long time even under harsh ...
Bomaksan Industrial Air Filtration Systems
Air flow: 13,400 m³/h
Diameter: 225 mm - 560 mm
... Properties • highly efficient EC technology • compact design • backward curved impellers • feet can be offset by 90° • variable discharge direction • integrated control system (EC controller) • speed is 100% infinitely variable Casing Casings ...
Rosenberg Ventilatoren GmbH
Air flow: 0 ft³/min - 86,000 ft³/min
... New York Blower Tubeaxial Fans are designed for moderate-pressure ventilation and industrial-process applications where axial flow is desirable and space is at a premium. Uses include heat, smoke and fume removal, process-drying with ...
NYB
Air flow: 1,250 m³/h
... Practical benefits: Professional quality "made in Germany" - Original Trotec fabrication Extremely powerful radial blower- max. 1.050 Pa - optimal for ventilation over long hose distance Adjustable air flow up to max. 1.250 m³/h ...
Trotec GmbH
Air flow: 1,250 m³/h - 95,000 m³/h
... Use : Draws fresh air in and expels smoke. Designed for use in commercial and industrial buildings. Description : Short (standard) or long (optional) galvanised steel casing Multiblade aluminium impeller with adjustable-pitch blades (adjustable ...
CIAT
Air flow: 60 m³/h - 250 m³/h
Rotational speed: 2,760, 2,850 rpm
Noise level: 45 dB
... Fans for a powerful and safe ventilation of safety storage cabinets. • Housing and impeller made of polypropylene • Sealed against gas emission • Connecting fitting DN 75 • Protection class IP 55 • Air flow ...
asecos GmbH
... This rotor can do both. The HUgo from Klingenburg transfers sensible and latent heat (i.e. energy bound up in moisture) simultaneously and sets new standards in terms of performance, hygiene, quality and reliability. Effective in Warm, Humid Climate ...
the best suppliers