The Motor filters DIL M12-XMSM is a suitable resolution for the clampdown of interference with three-phase motors. The device diminishes the voltage peaks and high frequency components caused by strident voltage rises. To continue, the ...
Current: 10 A - 250 A
Voltage: 250, 300 V
Frequency: 60 Hz
The Y2 Class capacitors have a capacitance of 10 to 1000 nF and are EN/IEC 60939 compliant. They have a pulse test capacity of 5kV and rated voltage of ≤ 300 V. The leakage current is 1.89 to 188mA and rated current is 10-250A. They ...
Current: 10 A - 200 A
Voltage: 650, 130 V
The FN 766X model manufactured by Schaffner, is a feedthrough filter, that features a class Y4 capacitor consisting of a 2.5 kV pulse test capability. It also highlights a compliance to EN/IEC 60939 standards. In addition, the FN ...
Current: 200 A
Voltage: 100 V - 1,000 V
Main Features C filtering cell Up to 80dB Typical Applications TEMPEST Anechoic chambers Faraday Cages Shelters Engine Protection
Current: 3 A - 20 A
Voltage: 26 V - 600 V
Exxelia EMI-RFI feedthru filters are available in C, L, Pi and T cells and can be either soldered or screwed. Designs with diameters from 3 to 17 mm can be achieve depending on the required performance. Exxelia is the sole ESA qualified ...
Current: 10, 15 A
Voltage: 25 V - 200 V
Main Features Silver plated Glass or resin sealing Threaded package Typical Applications Power supply Data signal
A reliable product from Maxim which represents a wide range of anti-aliasing and post-DAC filters. This can be used in an easy and stable manner. Device that improves system performance for frequencies up to 300 kHz. A technology that ...
Frequency: 3 MHz - 150 MHz
DIL 3 - 150 MHz 0.001 to 1% (-45 to 90 °C) 2 - 8 dB 100 dB max.
Current: 0.5 A - 6 A
Voltage: 250 V
0.5Ato 6A, 250VAC EMI Filters Features ♦ Low Cost (Than RSAL Series) ♦ Lug orWire Terminations ♦ Low Earth Leakage Current Option ♦ Conforms to UL, CSA and EN Safety Agency Certifications
TDK offers a wide range of different line filters: common-mode chokes for power lines, differential-mode chokes and sine-wave chokes. Whereas the common-mode chokes are used to reduce the asymmetrical interference level on power lines ...
Frequency: 70 MHz - 168 MHz
Shoulder Electronics presents BF series Surface acoustic wave (SAW) filter. For solder heat resistance, the equipment terminals should be dipped into the solder bath for 10±1 sec. The temperature should be 260℃ ±10℃ and distance no ...
Current: 5 A
Voltage: 250 V
The Ferroperm 33821003S is a soldermount Pi-filter constructed with Ø0.6mm tinned copper wire. This unit exhibits a working voltage of 250V DC with test voltage of 70V DC. It also has a maximum feed-through current of 5A as well ...
Frequency: 512 MHz - 1,900 MHz
The ITF LGA Filter is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and rugged construction for reliable automatic assembly. The ITF Filter is offered in a ...
Current: 20, 10 A
Voltage: 200 V
POWER SURFACE MOUNT EMI FILTERS PSM Series EMI Filters Power Surface Mount EMI filters feature high temperature construction and have current ratings up to 20 Amps. This filter series is non-polar and surface mountable with excellent ...
Current: 10 A - 400 A
Voltage: 80 V - 600 V
Features： ●This series are the feed through type AC/DC filter with high performance. ●Special feed through installation method; high insertion loss in wide freqnency band; suppress electromagnetic inference rate up to GHz. Applications： ●shielded ...
Frequency: 315 MHz
The RF3417 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 315.0 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct ...
ACT Meters International Ltd provides a wide variety of alarm troubleshooting systems for intruder and fire alarms. The products address issues such as false alarms and system breakdowns resulting out of EMI, RFI and nearby lightning. ...
Voltage: 400 V
This general purpose filter with single phase input is proposed in a very compact size. It can be mounted as desired or attacked directly on the device through biadhesive. The RC + Varistor is a particularly interesting model because ...
This model applies to analog circuit which is noise-sensitive. Put FC-A01D & FC-B01D on to the input of DC/DC module can ensure the module meet Surge level of IEC/EN61000-4-5 ±2KV (2Ω internal resistance)/±4KV (12Ω internal resistance) ...