DN: 2 in - 24 in
... Check Valves are non-slam wafer check connection type, making the valve as efficient, lightweight, compact, low cost operation fluid control device. With independent springs design, it improves the application with ...
... This type of valve is used to avoid backflow in the piping system or the pipeline that could damage downstream apparatus as pumps, compressors, etc. When the fluid has enough pressure, it opens the valve; when it comes ...
DN: 15 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: -4 °C - 200 °C
... Fully lined Ball Check Valves for safe non-return flow control of corrosive process media. Typical installations are in front of pumps, as overflow protection for liquids and in venting applications. Main features • Horizontal or ...
Swissfluid AG
DN: 2 in - 12 in
Pressure: 16 bar
Temperature: -10 °C - 82 °C
... Door Check Valve is a wafered,double door swing type check valve thatallows water flow in one direction only.A hinged clapper remains open with waterflowing in one direction, and automaticallycloses when flow stops preventing ...
Nuevas líneas de extincion
... pumping plants, it prevents the liquid from flowing back in case the pump is deactivated. The valve is closed by its own weight or by counter force. Check valves should be installed by paying attention to the flow direction ...
Pressure: 300 Pa
Temperature: -20 °C - 80 °C
... Description Check valves are destined generally as a security system to avoid that the pressure in the hydraulic circuit can invert the fluid direction, generally oil. For more information on our check valves, please ...
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... A screw-in，Cartridge-style，hydraulic check valve for blocking or load-holding device. Operation CV08-P0 allows flow from ① to ②, and blocks flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased ...
Hydrabase
DN: 0.5 in
Pressure: 210 bar
Temperature: -20 °C - 90 °C
... Hyva Check Valve with a max. working pressure of 210 bar, Nominal flow of 35 L/min. This Check Valve is made from aluminium and the temperature range is -20 / + 90. ...
DN: 50, 80 mm
Pressure: 16 bar
Temperature: 0 °C - 100 °C
... resistant against aggressive water flange connection with sidewise drain valve, rotatable hose connection element G 3/4 with test port check valve with SST spring EPDM-seat gasket free from ...
Kemper Olpe GmbH
DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -15 °C - 400 °C
... Spring-loaded, compact, stainless steel check valve. 316 stainless steel Spring-loaded 2 lb. or 10 lb. cracking pressures MNPT x MNPT Usable on metering pumps and injection line applications Suitable for pressures up to 2,500 PSI ...
JAECO Fluid Systems
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: 400 °C
... •Process line, product pipes, way out of pumps, fluid machinery. •The check disc valve close for the spring action when reduce the line pressure, getting a mild closing and avoiding the fluid recession and the surge when it close to ...
DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... Our check valves are available as screw-in or case valve models. Both models are available with the screwing-in direction blocked or with the screwing-in direction open for flow. The basic materials used are standard ...
HYTORC-TECHNOLOGIES GMBH
DN: 40 mm - 1,200 mm
Pressure: 40, 64, 10, 16, 25 bar
... STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-3 CHECK VALVES EN 558 S48 (ISO 5752) (DIN 3202 F6) FACE TO FACE EN 1092-1 DRILLING FLANGES STEEL EN 1092-2 DRILLING FLANGES IRON MATERIALS BODY FIG.500-500A-500AGS-505-505A ...
ACMO S.p.A.
... vacuum controlled check valve (ARV) is a pneumatically operated on-off valve featuring low pressure loss. To activate this valve, vacuum from the intake manifold is supplied by a solenoid valve. ...
DN: 50 mm - 1,350 mm
Pressure: 0 bar - 10.3 bar
Temperature: 0 °C - 178 °C
... Class 125 Cast Iron Sure Check™ Valves Size: 2 to 54 in. (50 to 1350mm) Description: Designed for liquids and gases where flow reversal can cause surge and water hammer. Elastomer seats provide bubble-tight shutoff. ...
Mueller Steam
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min
The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.
Dicsa
DN: 25 mm - 200 mm
... Ball check valve (PN 10) Lining-Materials: * PTFE (virgin or conductive) Different lining thicknesses and flange designs on request. Other pressure rates: * PN 16 * PN 25 * PN 40 Material: carbon steel and ...
DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F
... Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...
LOCKWOOD
DN: 25 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -196 °C - 550 °C
... Aluminium Bronze Check Valves Valve Body materials: aluminium bronze Valve Manufacturing standards: API, ANSI, BS, DIN, JIS Valve Connection: wafer, lug, flanged ...
Pipe Valve Flange Factory Landee
DN: 10 mm - 100 mm
Pressure: 10, 12, 16, 25, 40 bar
Temperature: -20 °C - 100 °C
... Full bore check valve, F/F threaded. Temperature range: -20°C +100°C ...
DN: 0.5 in - 12 in
Pressure: 150 psi
... SIZE: 1/2＂～2＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) CHECK VALVE TYPE: BALL/HALF BALL WORKING PRESSURE: 150PSI ...
Xiamen Keheng Plastic Co., Ltd.
DN: 1 in - 28 in
Mercury Products manufactures standard raincaps for heavy duty exhaust system protection and single-bolt installation with designs in 1" to 28" diameters. The precision-balanced vane, welded lid and a lubricated metal bushing are combined into one assembly ...
DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar
... - INOX Material - PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded Extra informatie - Flow [l/min] at which ∆p is 1 bar, determined according to DIN EN 60534-2-3. ...
DN: 0.125 in - 0.5 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 130 °C
... FARBO has a wide range of valves used for the pneumatic circuitry. Besides non-return valves, available both for power circuits that control, also quick exhaust and logical OR type valves. A technical ...
DN: 0.5 in - 4 in
Temperature: 0 °C - 100 °C
... Brass swing check valve Diameters from DN015 - ½" to DN100 - 4" Threaded F/F (ISO 228/1) NBR seal Minimum opening pressure 0,03 bar TR CU 010 compliant PN10 (PN6 for DN≥65) Free of CE marking (cat. according to Art. 4.3 Dir. 2014/68/EU) Working ...
VIR
the best suppliers