- Hydraulics - Pneumatics >
- Valve >
- Flow regulator
Flow regulators
Pressure: 40 bar
Nominal diameter: 0 in
Tapping point pressure regulator For non-corrosive industrial gases Tested for use with oxygen Single-stage type with hight control accuracy Central filter in the pressure regulator Safety ...
Flow rate: 0 l/min - 1.3 l/min
Pressure: 0 bar - 200 bar
Nominal diameter: 0.07 in
... gauges, repairs should never be attempted on gas regulators. Faulty, old or corroded regulators should be replaced. Internal seals and membranes will deteriorate with time, and as a rule gas regulators ...
Wilhelmsen
Flow rate: 1 l/min
... attempted on gas regulators. Faulty, old or corroded regulators should be replaced. Internal seals and membranes will deteriorate with time, and as a rule gas regulators should be replaced ...
Wilhelmsen
Flow rate: 1 l/min
Regulator fitting on the Minimix 34 and 58 cylinder for constant flow. Apart from replacing damaged or faulty gauges, repairs should never be attempted on gas regulators. Faulty, old ...
Wilhelmsen
Maxflow Regulators - G1/4 - G 1 • Made As per ISO 6953 -1 standard with aluminium die-cast body. • Fitted with "Rolling Diaphragm" to give quick response time. • Built in gauge is provided with an option of connecting ...
Pressure: 350 bar
Nominal diameter: 6 mm - 40 mm
DIN ISO 228 Female thread ANSI B1.20.1 NPT Female thread SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit
Pressure: 350 bar
Nominal diameter: 8, 10, 12, 16 mm
Material: Steel / Stainless steel PN: 350 bar Available sizes: DN8 - DN16 (3/8" to 5/8")
Pressure: 350 Pa
Nominal diameter: 6 mm - 30 mm
Material: Steel PN: 350 bar Available sizes: DN6 - DN30 (1/8" to 1 1/4")
Flow rate: 100 l/min - 1,580 l/min
Pressure: 15 psi - 145 psi
Nominal diameter: 4 mm - 12 mm
... “–FG” series can also be used in areas where wash down could degrade standard flow controls, such as food and packaging. This series is designed to offer the maximum control by increasing the number of ...
Pressure: 28 bar
... Automatic Flow Regulator provides for external adjustment of the flow rate. Parker’s AFR-3 is a liquid flow control device for overfeed or recirculated ...
Parker Refrigerating Specialties Division
Pressure: 50, 250 psi
... VCD 1000 flow controller is precision-engineered to control low gas flows at constant mass flow rates regardless of changes in downstream pressure. The ...
Parker Precision fluidics Division
Flow rate: 4 l/min - 500 l/min
Pressure: 14, 21 MPa
Nominal diameter: 5 mm - 20 mm
Flow control and check valves are pressure and temperature compensated to maintain a constant flow regardless of changes to pressure, temperature and viscosity. For other products visit ...
Pressure: 0 bar - 11 bar
Nominal diameter: 0.25, 0.5 in
... technology and industry standard interfaces make the red-y smart series thermal mass flow meters (MFM) and mass flow controllers (MFC) particularly suitable for measurement and control ...
Vögtlin Instruments GmbH – Gas Flow Technology
Flow rate: 0 l/min - 24 l/min
Pressure: 4, 2 bar
Nominal diameter: 5 mm
Small proportional flow valve for regulating both air and non-corrosive gases. Voltage signal 10 V as standard or optionally 5 V or 20 V DC. Media: 50 µm filtered compressed air or non-corrosive gases Electrical_specification: 1. command ...
AirCom Pneumatic
Pressure: 0 bar - 10 bar
Nominal diameter: 65 mm - 500 mm
The precise regulation of the air flow into sewage basins does not only influence the optimal quality of your cleaning process but furthermore still saves pure money because the energy-intensive compressed air is well ...
... purpose flow controller accepts one flow sensor input, and provides one 16A relay for low-flow pump or process protection. The optional flash alarm brings attention to ...
Flow rate: 0 l/min - 10 l/min
Compact mass flow meter with RS-232 EIA and analog 4...20 mA interface, based on the proprietary Platinum MEMS technology from Axetris (MEMS: Micro Electro-Mechanical Systems). It offers the following advantages: ...
Axetris AG
Flow rate: 0 l/h - 3,000 l/h
Pressure: 150 psi
... digitally-controlled mass flow controller is available with either RS485, Profibus™, EtherCAT, or DeviceNet™ I/O. The digital control electronics utilize the latest MKS control ...
MKS Instruments
Flow rate: 0 l/min - 3 l/min
Pressure: 240, 345, 896 bar
... pressure compensated, hydraulic flow regulator valve (restrictive type). Operation The valve maintains a constant flow rate from port 1 to port 2 regardless of load pressure changes. ...
Flow rate: 1 l/min - 20 l/min
Pressure: 50,000 Pa - 300,000 Pa
Panel-mount flow controllers in the MPC series combine our proprietary ultra high speed Micro Flow sensor with a compact proportioning solenoid valve, a new flow ...
This small flow controller is intended for use during testing and evaluation of Xavitech BLACK edition micro pumps. By turning the potentiometer the user will be able to adjust pump flow ...
Xavitech AB
VAV FLOW REGULATORS The RSVB series of VAV flow regulators are used to create ultra energy efficient systems for controlling the micro-climates in civil and processing ...
SagiCofim
Pressure: 145 psi
MCD–Bidirectional Gas Mass Flow Controllers The most versatile gas flow controller in the world Alicat’s MCD is the world’s first bidirectional mass flow ...
Alicat Scientific
Pressure: 2 bar - 3 bar
PR3 series regulators are mechanical devices used for compressed air flow management in bubbling measuring systems. These regulators are used in the BMS Valcom® system, in connection ...
Pressure: 175 psi
Nominal diameter: 2 in
High Flow Regulator The QB1 Series product can accomplish endless possibilities when assembled to the correct volume booster for your application. The QB1 can accept a current, voltage, or serial interface ...
Flow rate: 0 m³/h - 130 m³/h
Pressure: 420, 160, 250, 320 bar
Nominal diameter: 50, 80, 15, 25, 40 mm
... display, a high control precision, rot/corrosion proof, fouling prevention, alternating current and direct current dual-purpose, flow manual control or automatic flow ...
Shanghai Yinuo Instrument Co., Ltd
Flow rate: 0 m³/min - 0 m³/min
Pressure: 10 bar
Controls the air flow and pressure being delivered to the system, thereby reducing artificial demand in the plant. CFC is based on flow control valves used with CALMS ...
Pressure: 30 psi - 4,000 psi
Nominal diameter: 1.63 in
Uniweld’s MR82 Regulators feature: • Machined brass body & bonnet • Easy-to-read single scale 2″ gauges • Mechanical stem type seat • T-handle for smooth flow adjustment • Porous bronze inlet filter • ...
Uniweld
Flow control and temperature monitoring Compact design and manufacturing quality. Easy integration with the injection molding machine as well as maximum control of flow ...
INDUSTRIAL MARSE
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining