Gas/liquid heat exchangers

89 companies | 246 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
multi-tube heat exchanger
multi-tube heat exchanger
WT

Power: 0.4 kW - 117 kW
Operating pressure: 16 bar
Temperature: 100 °C

... Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR, TZ-Silenzio, TVJ or TVT, and mechanical self-powered CAV controllers Type EN For hot water up to 100 °C Horizontal ...

air/water heat exchanger
air/water heat exchanger
AE series

Power: 700, 1,700, 4,000, 6,900 W
Operating pressure: 10 bar

... extra-flat air/water exchangers are available in 230V or 400V. They can be equipped with a thermostatic valve featuring two or three valve ways that open progressively to eliminate water-hammer phenomena or variations over your water ...

plate-fin heat exchanger
plate-fin heat exchanger
ZL3 series

Power: 6 W
Temperature: 50 °C

... concurrently. The dispelled moisture and fresh air undergo ample heat exchange in the waste heat regeneration device, allowing for the discharge of moisture and the introduction of fresh air ...

brazed plate heat exchanger
brazed plate heat exchanger
PB

Operating pressure: 0 bar - 30 bar
Temperature: -10 °C - 230 °C

... Plate Heat Exchangers ▪ high heat transfer coefficient ; ▪ small unit size with high heat transfer capacity ; ▪ high resistance to pressure and temperature fluctuations ; ▪ stainless ...

plate-fin heat exchanger
plate-fin heat exchanger

... AirFin Heat Exchangers have been designed, manufactured, and supplied worldwide for over 40 years. Our satisfied customers include the process, and power generation industries. The AirFin air-cooled heat ...

multi-tube heat exchanger
multi-tube heat exchanger
HWT-H

... Heat exchangers, horizontal version • - Heat exchanger in welded steel construction combined into one pressure device • - For the preheating of gases in various systems • - Standard ...

See the other products
Heat Group
heat exchanger unit on skid
heat exchanger unit on skid

... seperately. Applications Heating of natural gas, clean water, freeze protection, cooling towers, steam boilers, mildly corrosive solutions (in rinse tanks, spray washers), oils, hight temperature, low flow gas, process ...

air/water heat exchanger
air/water heat exchanger
AWEX series

Power: 1,080 W - 7,133 W
Operating pressure: 0.5 bar - 3.5 bar
Temperature: 10 °C - 60 °C

... Water is conveyed into the heat exchanger and cooled by the fan-forced air. The heat exchange occurs between the ambient air and the liquid. Cooling ...

finned tube heat exchanger
finned tube heat exchanger
HS

... 100% personalized heat exchangers and coolers. Compatible with oil, diesel, water/glycol. ...

welded plate heat exchanger
welded plate heat exchanger
PLATULAR® series

... All types of heat exchange (counter flow heat exchanger in general): Liquid / liquid Loaded liquids Condenser Evaporator Interchanger Reboiler Steam ...

See the other products
Barriquand Technologies Thermiques
shell and tube heat exchanger
shell and tube heat exchanger

... industrial heat exchange. Our robust shell and tube heat exchangers are engineered to meet the rigorous requirements of high-pressure, high-temperature, and high-viscosity environments, where standard ...

scraped surface heat exchanger
scraped surface heat exchanger
Kombinator® 250S

Operating pressure: 17 bar
Temperature: -30 °C

... certification demands. Function and Principles of Operation The crystallization takes place in the scraped surface heat exchanger (SSHE) which is the heart of the crystallization line. The product is pumped into ...

double-wall plate heat exchanger
double-wall plate heat exchanger
D Series

Power: 0.2 kW - 17.58 kW
Operating pressure: 30 bar
Temperature: -30 °C - 200 °C

... shield to keep fluid stay and flow on the same channel through the air gap. Meanwhile, vent holes outside the plate will seep out fluid as an indication of leakage. Industries: Hydronic Heating, District ...

See the other products
Kaori Heat Treatment Co., Ltd.
brazed plate heat exchanger
brazed plate heat exchanger
HFQ10

Power: 1,000 W - 30,000 W
Operating pressure: 450 bar
Temperature: 225 °C

... brazed plate heat exchanger is vacuum brazed together with copper or nickel. Compared with gasketed plate heat exchanger, brazed plate heat exchanger ...

See the other products
Hofmann (Beijing) Engineering Technology Co., Ltd.
double-wall plate heat exchanger unit
double-wall plate heat exchanger unit

Operating pressure: 60 bar
Temperature: -200 °C - 400 °C

... process: Heat transfer for cooling or heating We calculate the necessary heat exchange surfaces, the spacing between plates and other dimensional parameters according to each application Thanks to more than ...

brazed plate heat exchanger
brazed plate heat exchanger
DBL series

Operating pressure: 20,000 Pa - 30,000 Pa

... thermal performance. Two combined heat exchangers, consisting of both the air to air heat recovery and air to refrigerant. Integrated connection with ...

multi-tube heat exchanger
multi-tube heat exchanger
Mixflo series

Operating pressure: 10 bar
Temperature: 184 °C

... multitube mixflo heat exchanger has small diameter tubes that are fitted inside an external jacket. These are welded from one end to the other. The product that needs to be thermally processed will flow inside smaller ...

tubular heat exchanger
tubular heat exchanger
Hybrid

... The hybrid heat exchanger is a special plate heat exchanger covering nearly all industrial applications. It is suitable for chemistry, petro chemistry, sugar-, food- and pharmaindustry, ...

plate-fin heat exchanger
plate-fin heat exchanger
W series

... The heat exchangers are of finned coil type composed of seamless tubes mechanically expanded onto fins with joined collars in order to insure an optimum heat transfer. The coils can be manufactured ...

finned tube heat exchanger
finned tube heat exchanger
SS

Power: 23 W - 76 W
Operating pressure: 0.1 bar - 0.6 bar
Temperature: 25 °C - 67 °C

... OMT Group AIR-OIL heat exchangers have been designed to be used on the return line of the hydraulic systems. The special structure of the cooler element in aluminium alloy increases the conductivity quality, and the brase ...

See the other products
OMT Group
plate heat exchanger
plate heat exchanger
COMBIAERATOR ®

... COMBIAERATOR ® EXCHANGER (PATENTED) - Exchanger/refiner/homogenizer for aimed technological needs of fast crystallization and high aeration. - The number of items mounted on the hygienic design frame, is set according ...

air/oil heat exchanger
air/oil heat exchanger
FSH series

Power: 1, 1.2, 0.6 kW
Temperature: 60 °C

... Stainless steel heat exchanger is made of 321(1Cr18Ni9Ti) stainless steel plate, tube Double air input and output design. Equipped with the world brand Riello burner. Automatic control system operate ...

tubular heat exchanger
tubular heat exchanger
SKI series

... Heat exchangers designed and manufactured by S.T.I.T.I. can increase the temperature of a gas through the thermal exchange between water or steam and the fluid to be ...

plate heat exchanger
plate heat exchanger

... The Howden rotary regenerative heat exchanger is widely used as a gas- gas heater in wet flue gas desulphurisation processes. Prudent selection of materials, together ...

air/water heat exchanger
air/water heat exchanger
A2W30 series

Operating pressure: 129 Pa
Temperature: 34 °F - 140 °F

... extreme, Hydro Edge Air-to-Water Heat Exchangers by Thermal Edge provide reliable, efficient, and cost-effective solutions. Ideal for high ambient conditions and tough industrial environments, these air-to-water heat ...

tube-tube heat exchanger
tube-tube heat exchanger
HRS DTI series

... The DTI type heat exchanger is a double tube heat exchanger (tube within a tube). The inner tube is corrugated for increasing the heat transfer. The product flows through ...

See the other products
HRS Heat Exchangers
multi-tube heat exchanger
multi-tube heat exchanger
XLG® I series

Operating pressure: 10 bar
Temperature: -40 °C - 180 °C

... Multi-tube heat exchangers developed for industrial applications such as steam water heating, energy recovery, condensation etc. Description XLG®I-Series Industrial Multitube heat exchangers ...

See the other products
XLG Heat Transfer
tubular heat exchanger
tubular heat exchanger
Aerofin® FLEX, AFLEX

... 5/8" OD tube steam coil for heating with flexible tubes for thermal expansion and contraction Type FLEX coils are 5/8” OD tube steam coils for demanding applications where frequent cycling occurs due to intermittent operation. The “S” shaped tubes absorb ...

See the other products
Aerofin
plate heat exchanger unit
plate heat exchanger unit

... will design a liquid cooled assembly that requires a liquid to air heat exchanger in the system design. While most engineers use a standard heat exchanger, ...

plate heat exchanger
plate heat exchanger
Softcool®

... refrigerant the supply air can be cooled up to 12 K. In addition to this the integrated plate heat exchanger is used for heat recovery in winter. Softcool®’s optimized moistening ...

See the other products
Polybloc AG
plate heat exchanger
plate heat exchanger

... • Heat exchanger made of plastic • Heat exchanger for passage of hot water or steam • To be installed on tank’s wall or bottom • Available in different size (on request) • Made of PE ...

heat exchanger with spiral tube
heat exchanger with spiral tube
KBFC

Frigosystem's KBFC Series is part of the company's line of refrigeration systems. Models of the series are capable of integrating with the chiller models of the RACA/C or RACA PLUS ENERGY series. Integration is achieved via high-quality cooling coils.

flat tube heat exchanger
flat tube heat exchanger

... Lytrons aluminum heat exchangers offer high temperature exchange functions. These units feature vacuum-brazed designs in naturally controlled spaces. This provides comprehensive levels of cleanliness, quality, and dependability. ...

See the other products
Lytron
heat pipe heat exchanger
heat pipe heat exchanger
HPS series

... aluminum fin – Filled with special fluoride for heat exchange media – Heat insulation section in the middle for heat and cold source insulation – Free of maintenance, washable and longer service life – ...

See the other products
Beijing Holtop Artificial Environment Technology Co., Ltd.
finned tube heat exchanger
finned tube heat exchanger

... dry coffee, soybean, corn, haricots, cotton, cocoa, Brazil nuts, rice, etc. Their main characteristics are: Used in heating air to dry grains and seeds in general; Customized designs based on the application, the process involved, and ...

shell and tube heat exchanger
shell and tube heat exchanger
Dimpleflo® Multitube™

... of Shell and Tube Heat Exchangers, also referred to as Multitube™, are ideal for fluids and gases where space (compactness) is important. The primary fluid or product is supplied to a grouping of parallel ...

See the other products
Teralba Industries Pty Ltd
rotary heat exchanger
rotary heat exchanger
LAC

Operating pressure: 21 bar

... Parker’s Quiet Air Oil Cooler (QAC) offers the lowest noise levels compared to any other air oil cooler available on the European market The Quiet Air Oil Cooler (QAC) series is engineered for industrial ...

rotary heat exchanger
rotary heat exchanger
LDC

... The LDC air oil cooler series with 12 or 24V DC motor is optimized for use in the mobile industry and is available in a range of cooling capacities from 1kW to 30 kW. Please use the sizing software for proper cooler sizing. ...

rotary heat exchanger
rotary heat exchanger
QDC

... The QDC air Fluid Cooler series with 24V DC and up to 800V DC Fan Drive is optimized for use in the mobile, electrification market and is available in a range of cooling capacity from 1kW to 400kW. ...

tube bundle heat exchanger
tube bundle heat exchanger

... tube bundle heat exchanger designed for cooling locomotive lubricating oil.

Main features

  • Aluminum plate fins mechanically bonded to copper tubes
  • Durable rolled tube-to-header joints
  • Secondary
...

shell and plate heat exchanger
shell and plate heat exchanger
Xchange AirEx AX series

Operating pressure: 0 psi - 377 psi
Temperature: 0 °F - 250 °F

... typically 2 weeks Compact bar and plate design using air for cooling where water is unavailable, costly or undesirable. Can be up to 65% smaller than Fin Tube designs. Typically supplied with fan/motor but can ...

See the other products
xylem
tubular heat exchanger unit
tubular heat exchanger unit

Power: 1,000 kW

exhibit your products

& reach your clients in one place, all year round

Exhibit with us
DirectIndustry RFQ: Free quotation comparison tool
Receive and compare quotations for free
Describe your project
We select
the best suppliers
Compare quotations and complete your purchase