Gear lubricants

High-speed grease for gears CENTOPLEX CX 4/375 AU is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0. Benefits for your application For ...

... temperatures Lubricating film spreads particularly well Good protection against wear Good anti-corrosion properties Resistant to ageing Excellent low-temperature behaviour Particularly suitable for the ...

... biodegradable gear oils based on synthetic ester oil. They contain ≥90 % of renewable raw materials and achieve the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant ...

Viscosity: 0.0001 m²/s - 0.00068 m²/s
Operating temperature: -18 °C - 320 °C

Gears, movements and various mechanical systems requiring anti-wear properties. For Morgoil-type hydrodynamic bearings, BGV bearings and Danieli ESS. Excellent oxidation and thermal stability : extended drain intervals. Very ...

Viscosity: 0.00032, 0.00015, 0.00022, 0.0001 m²/s
Operating temperature: -12 °C - 260 °C

... high temperature and load conditions. Bearings and gears operating in a warm, moist environment. Wet- and dry-end sections of papermaking machines. Advised when loaded gears form part of the lubrication ...

Viscosity: 0.000155, 0.00046, 0.00022, 0.00032 m²/s
Operating temperature: 254, 240, 245, 206 °C

Plain or rolling bearings and medium-loaded gears subjected to considerable temperature constraints. Drying cylinder bearings for papermaking machines. Hydraulic circuits in variable crown cylinders. Recommended ...

Operating temperature: 0 °C - 120 °C

The LMCG 1, which is manufactured by SKF, is a grid and gear coupling grease that has been developed to provide efficient, and reliable quality performance. It is a polyethylene thickened and mineral oil based grease ...

... needs of gearbox technology. Our Mobilgear™ 600 XP Series advanced technology lubricants are designed to protect gears, bearings and seals in all types of enclosed-gear ...

Mobil SHC Gear 22M and 46M are supreme performance ultra high viscosity synthetic lubricants designed specifically for use in heavily loaded, low speed open gears where boundary lubrication ...

Viscosity: 0.000022 m²/s - 0.001 m²/s

Mobil SHC™ Gear synthetic gear oils help reduce unplanned downtime and maintenance – a must for those difficult-to-access gearboxes. Our Mobil SHC™ Gear synthetic gear ...

Gear Oils from Eni are synthetic and mineral-based lubricating fluids, composed of elements that guarantee ample oil resisting capacities, effective lubrication functions, as well as ...

Operating temperature: -20 °C - 140 °C

... slewing rings and rotary furnaces tyres. of bare gears in such different sectors as: Chemical industries, cement works (rings), iron and steel works, sugar mills and paper mills Wood industries. Lubrication ...

Operating temperature: -20 °C - 180 °C

... suitable for extreme mechanical conditions found in iron & steel facilities, paper mills, sugar refineries, cement plants, lubrication in offshore environments, etc. Operating temperature range: -20°C to +180°C Grade ...

Operating temperature: -45 °C - 150 °C

Grease for low temperatures and high speeds Mineral grease for systems operating at high speeds. Good resistance of the grease to centrifugation. For all types of bearings, rollers or mechanisms operating at very high speeds. ...

Operating temperature: -25 °C - 80 °C

... with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess ...

Viscosity: 0.000185 m²/s
Operating temperature: -20 °C - 130 °C

... with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess ...

Viscosity: 0.00049 m²/s
Operating temperature: -10 °C - 160 °C

OKS 420 is a high-temperature grease for universal use at increased requirements. Areas of application Gearbox lubrication of heavily loaded, relatively slow-running toothed gearing when grease is ...

Operating temperature: -20 °C - 130 °C

Ageing-stable high-performance grease with MoS₂. Application Especially developed for use in gear drive shaft/clutch disc-hub (automotive ). For all kinds of roller and sliding bearings with slow and/or oscillating ...

Operating temperature: -15 °C - 120 °C

... food, beverage and pharmaceutical industries Application Long-term lubrication of rolling and plain bearings, armatures, tap cocks, joints, sliding surfaces, bearings and gears in food and beverage ...

Operating temperature: -15 °C - 120 °C

... food, beverage and pharmaceutical industry Application Long-term lubrication of rolling and plain bearings, armatures, tap cocks, joints, sliding surfaces, bearings and gears in food and beverage ...

Viscosity: 14 m²/s

BOERCUT GGO It is low-misting gear grinding oil with high performance extreme-pressure additive。It gives excellent lubrication and has good liquidity and filtration. The oil is formulated with high ...

... Good extreme pressure lubrication performance、 good rust preventive performance and low oil mist。 BOERCUT 7015 General cutting oil，low oil mist。Contain inactive extreme pressure additives and synthetic ester，Good ...

range of greases are dedicated to the lubrication of heavy duty open gear drives used in the following industries : Cement, ore, steel, coal lines in the thermal stations, fertilizers, chemicals (lateral ...

Based on polyglycol, these oils are essential for the lubrication of worm gears or other mechanisms where friction is a critical parameter. They can be used with some elastomers. These oils are not compatible ...

... anticorrosion properties. Beside, they remain perfectly compatible with mineral lubricants. These oils show a very long lifetime for the lubrication of heavy duty gears and bearings. ...

Viscosity: 0.00022 m²/s
Operating temperature: 0 °C - 130 °C

Operating temperature: -20 °C - 140 °C

... water developed for equipment working under high temperature and heavy loads. It is suitable for the lubrication of : loaded bearings, ball bearings, gears, articulations, coupling, sliding channels, ...

Operating temperature: 0 °F - 250 °F

... APPLICATIONS: Hinges, latches, overhead door tracks, open gears, chains, cables, slide conveyors, guide rails, cams, pistons, machinery, tools, & equipment. A break-in lubrication for bearings.

... Hypoid Gear Oil has low pour points and high temp properties to provide lubrication over a wide temperature range. This versatile lubricant contains anti-rust and anti-wear EP additives ...

Operating temperature: 250 °F

DESCRIPTION: Plastic safe lubricant, penetrant and corrosion inhibitor that helps prevent electrical malfunctions caused by water penetration, humidity, condensation or corrosion. Restores resistance values and helps ...

NYSWITCHO 3X is a special low viscosity switch-gear oil which meets specification IEC 60296(82) Class III A. NYSWITCHO 3X is a special low viscosity switch-gear oil This special grade meets specification ...

... adhesion to metal surfaces in lubricant and grease formulations NYNAS BBT 28 US STANDARD can be used in lubricants for applications where relatively low speeds and high loads are the norm, such as lubricants ...

... Group I replacement in industrial lubricants and neat metal working fluids NYBASE ISO VG 46 is ideally suitable for the blending of high quality industrial lubricants and slideway oils Applications ...