... Flatbed UV tunnel Flatbed UV tunnel for curing UV-sensitive inks and products. Efficient, reliable and easy to operate. Available with Medium Pressure lamps or LED technology. Quality: Designed for industry according to European standards. Parts ...
Maximum temperature: 1,100 °C - 1,100 °C
Capacity: 5.1 l - 13.93 l
Width: 25 cm - 36 cm
... )
ULTRATECH Srl
... architecture enables construction of very large
furnaces while keeping components transportable and assembled on site without compromising process performance.
Applications
- Heat treatment
ULTRATECH Srl
Maximum temperature: 0 °C - 270 °C
... with UNI EN 1539:2010 for dryers and
ovens where flammable substances may be released. Working temperatures are stated up to 270 °C; the specific models listed below indicate a maximum of 200 °C.
The oven is ...
ULTRATECH Srl
... Non-frame KCF Carburizing Furnace / Non-frame KNF Gas Soft Nitriding Furnace The conventional frame curtain has been replaced with a vacuum-purged oil bath that improves safety and work environment where heat ...
Koyo Thermos Systems
Maximum temperature: 550 °C
Capacity: 75 l
Width: 870 mm
... low temperature electric laboratory furnace SNOL 75/550 is intended for electrodes, drying, preliminary heating, hardening, loosening, normalising and other thermal processing up to temperature of 550°C. The furnace ...
SNOL
... The top model of our program controlled heat treatment units, with up to 12 separate control circuits. Depending on requirements, fewer or more control circuits can be supplied. In this way it is possible to start ...
Weldotherm GmbH
Maximum temperature: 1,250, 1,300 °C
Capacity: 5, 10, 20, 40, 60 l
... Medline’s MD1305, 5 Litre Chamber Furnace provide a strong level of versatility without compromising quality, safety or reliability. Furnaces can be used in quality control tests, ashing, heat treatment, ...
... Perfect Oven is the name of a world-class series of temperature chambers used in a wide range of applications, including high-temperature testing and manufacturing processes such as heat treatment and ...
ESPEC
... settings and a maximum of 999 repeat cycles. Temperature chamber with explosion vent This industrial oven is suitable for drying and heat- treatment of flammable synthetic resins or volatile solvents. ...
ESPEC
Maximum temperature: 2,300 °C
Capacity: 75 l
Width: 40 cm
... range is made of furnaces dedicated to heat treating under vacuum at high temperatures. The enclosure is insulated with specific metals, with a possible choice of molybdenum or tungsten resistors. It is the perfect tool ...
ECM Technologies
Maximum temperature: 1,250, 1,350, 1,500 °C
... patented rotating flow cooling. The BMI vacuum furnaces of the B8_T family are designed for the main heat treatments and brazing at high temperature and especially for sensitive quenching treatments ...
B.M.I. Fours Industriels
... electric furnace are welded by steel plate and section steel. Soft contact between the trolley and furnace lining can sharply reduce thermal radiation and connective thermal losses so as to guarantee the furnace ...
Anhui Xinning Equipment Company
... Increased quenching speed and uniform cooling. Flexible dynamic cooling system with alternating cooling gas flow, giving the furnace high flexibility. Can be adapted to a wide range of materials, geometries and loads. Advanced convection ...
Ipsen International GmbH
... curing oven requires as little as six feet of floorspace for cure cycles as long as four hours. Heller Vertical format ovens consume unused air space, not valuable floor space. The Heller 788 in-line, vertical format ...
Maximum temperature: 200 °C - 1,200 °C
... structure of the high-temperature atmospheric furnace unit consists of a furnace shell, upper/lower end covers, insulation plates, muffle tubes, heating elements, electrode plates, insulation layers, etc. The furnace ...
... This machine is designed to improve the cell efficiency by applying a passivation layer on the front side of the silicon wafer after Edge Isolation and PSG removal. Spec High Throughput: 14,400 wafers/hr (2,400 wafers/boat) Cycle Time: 60min Uptime: ...
Maximum temperature: 100, 140 °C
Width: 1,500, 870 mm
Height: 1,150, 460 mm
... The application area of Conveyor Ovens is versatile. Conveyor Ovens are suitable for continuous heating, thermal treatment or clock-controlled dwell times of components. Applicable are single parts on ...
Ihne & Tesch GmbH
Maximum temperature: 1,300 °C
... NEW H1 Nargesa propane forging furnace has been designed to heat irons more efficiently, more safely and respecting the environment. MORE EFFICIENT: Consume up to 75% less gas and reach a higher temperature than any furnace ...
Maximum temperature: 1,100 °C - 1,800 °C
Capacity: 5 l - 45 l
Width: 150 mm - 360 mm
... MSE chamber furnace is designed for use at a wide temperature ranges and different volumes in order to enable users to perform melting, thermal ageing, metal heat treatment, sintering, burning, tempering, ...
MSE TEKNOLOJİ LTD. ŞTİ.
Maximum temperature: 650 °C
Width: 900 mm
Height: 600, 900 mm
... Optimizes and traces treatments, thanks to atmosphere control (Kn regulation) Delivers gas savings of up to 50% compared to conventional treatment Perfect for aeronautical standard and Nadcap application compliance. Treatment ...
Maximum temperature: 0 °C - 1,050 °C
... line with new requirements, both in terms of capacity and treatments Particularly suitable for production of parts in medium and small production runs requiring flexibility of heat treatment parameters ...
Codere
Maximum temperature: 2,400 °F
Width: 12 in
Height: 12 in
... Backed by fully stocked spare parts warehouse and the best technical support Full one year warranty The Mentor Vacuum Furnace Hot Zone Hearth: molybdenum support pins and rails Heating Elements: curved, segmented graphite bands Insulation: ...
Solar Manufacturing
... shaft furnace and the retort furnace are ideally suited for the heat treatment of slim small parts or for finishing by nitriding, carbonitriding or carburizing, for example. Shaft furnace ...
HOFMANN WÄRMETECHNIK GMBH
Maximum temperature: 1,200 °C
Width: 450 mm
Height: 600 mm
... 1200℃ manual door industrial furnace is used for quenching, tempering, normalizing, annealing and other heat treatment processes of metal materials, and can also be used for sintering of non-metallic ...
Henan Sante Furnace Technology Co.,Ltd.
... Class A if required lowtemperature-7 Heat Treating Ovens Nutec Bickleys Heat Treating Ovens can be used for treating a variety of metals to harden, soften or cure a material through ...
Nutec Bickley
Maximum temperature: 1,500 °C
... annealing, brazing, bright annealing, heat treatment, sintering, tempering Continuous annealing and subsequent cooling of tungsten coil for lighting means. Further possible applications: Tempering and low-stress ...
Linn High Therm
Maximum temperature: 950 °C
Width: 550, 1,400, 1,350, 800 mm
Height: 450, 750, 950, 1,800, 1,700 mm
... special steel plate,shaft,rotary parts,centrifugal fan impeller Car bottom electric resistance type heat treatment furnace is one commonly used heat treatment equipment, ...
HENAN TIANLI THERMAL EQUIPMENT CO.,LTD
Maximum temperature: 400 °F - 2,200 °F
... unique and proprietary features of Epcon’s Industrial Heat Treatment Furnace designs include; Precision Programmable Temperature and Atmosphere Controls, Heavy Duty Car Bottom or Insulated Box Furnace ...
Epcon Industrial Systems, LP
... purpose, gas analyzers with infrared, paramagnetic cells etc… are required. Auxiliary equipment for heat treatment furnaces Heat treatment furnaces ...
SABE FORNI
Maximum temperature: 800 °C - 960 °C
Capacity: 2,600, 4,200, 5,300, 8,900, 13,500 l
... The GKF series is manufactured by Sistem Teknik, and is a sealed quench chamber furnace that is utilized for broad range of treatments, which includes case hardening, carbonitriding hardening, normalizing, recarburizing ...
Sistem Teknik Industrial Furnaces
... PIT FURNACE We offer a variety of pit furnaces for different kinds of batch heights, diameters and weights. We offer a variety of pit furnaces with: Batch height up to 25 meters Batch diameter ...
Aichelin Group
... Electric Bogie Hearth Furnace designed for tempering, quenching, annealing, and normalizing. These are car-bottom kilns and furnaces suitable for batch firings, specifically engineered for the heat ...
Pagnotta Termomeccanica s.r.l.
... CombHEX Car Bottom Heat Treatment Furnaces are used for heat treatment of products in forging and pressing shops, construction material production as well as for the ...
Maximum temperature: 780 °C - 1,100 °C
... Thermo ADI Series Austempering batch furnaces Main Features: • Flexiblility • Atmosphere safety system • Reliability • Strong structure • Fast temperature rise • Process quality report produced by the control system • Self-diagnosis ...
La Fornitecnica S.r.l.
Maximum temperature: 1,200, 1,100 °C
... hardening furnaces enable hardeningprocesses under inert gas, semi-vacuum hardening, carburising, etc. These controlled-atmosphere systems are modular in design and can be enlarged to form compact hardening systems. For many of these ...
ThermConcept Dr. Fischer
Maximum temperature: 250 °F
... Bench Top Hardening Heat Treat Furnace & the Keith Bench Top Annealing Heat Treat Furnace – the Keith Standard 2250F Rated Bench Top Assaying Furnace comes in a variety ...
Keith company
Maximum temperature: 1,200 °C
Capacity: 15 l
... The laboratory furnaces 1200°C are used for a large number of high temperature treatments: burning, degassing, pre-heating, hardening, tempering, annealing of metals, stress relief, stabilization, tests ... in many branches ...
France Etuves
Maximum temperature: 260 °C - 1,200 °C
Capacity: 48 l - 6,811 l
Width: 300 mm - 2,900 mm
... Professional chamber ovens Heldors ICO line is made for tempering, annealing, ageing, preheating, drying, age hardening and other thermal treatment processes of various materials in temperature range from 50⁰C to 860⁰C ...
Heldors
Maximum temperature: 900 °C - 1,800 °C
... 500KG Induction Furnace for Melting Scrap Steel, Iron, Copper, Aluminium The induction furnace body mainly includes: Open furnace body, furnace frame, furnace cover, ...
Tangshan Juntong Technology Co., Ltd.
Maximum temperature: 20 °C - 280 °C
Capacity: 640 l
Width: 1,200 mm
... manufacturing, coating, printing, aerospace, etc. Product Description Inert gas oven, also known as no oxidation oven and nitrogen gas oven, is a new type of anaerobic electric drying oven. ...
ATMARS INDUSTRY CO., LIMITED
6 expert tips
minimizes heat loss and significantly reduces long-term operational energy expenditures in heavy industrial manufacturing environments.
ensures repeatable thermal cycles and provides comprehensive data logging for strict industrial quality assurance audits.
against production bottlenecks optimizes inventory levels and improves overall manufacturing facility efficiency and workflow.
reduce manual labor safety risks and improve thermal cycle time consistency across the production line.
mitigates downtime risks and ensures spare parts access during critical peak manufacturing and processing periods.
Maximum temperature: 200, 100 °C
... applications; Can be produced in special shapes and different power levels. Application areas; Powder and wet paint curing ovens Wood industry lacquer and varnish drying Drying of varnishes and adhesives Paper industry ...
MEP TEKNIK
the best suppliers