High-pressure fans

Air flow: 0 ft³/min - 260,000 ft³/min

NYB BC Fans are ideally suited for a wide range of high-pressure, industrial-process applications including: combustion air, solvent recovery, thermal oxidation, fluidizing, combustion, ...

Air flow: 100 m³/h

Air flow: 1,500 m³/h - 132,000 m³/h
Diameter: 315 mm - 1,250 mm

The Colasit CHVN radial fan is a high-pressure fan for high volumes of up to 132000 m³/h and high pressures of up to ...

Air flow: 120 m³/h - 2,100 m³/h

... industries where small capacities with medium and high pressures are required. The temperature of the fluid sucked in must not exceed 80°C without cooling fan and 150° C with cooling ...

Air flow: 1,000 m³/h - 6,385 m³/h
Diameter: 400 mm
Rotational speed: 1,000 rpm - 2,510 rpm

* This specification may vary by motor load and environment * Input Voltage : AC 3~380V 50~60hz Input Power : 2.2kw 1. Control Bluetooth and Wi-Fi - Motor control via mobile apps and websites 2.RS-485 Modbus RTU 3.Set device ...

Air flow: 10,000 m³/h - 113,400 m³/h

... to select the most suitable fan whether airfl ow, pressure, consumption, sound level, size, or price is requested. Applications: For ducted application with important pressure drop in ...

Air flow: 150 m³/h - 10,000 m³/h

... between thick and thin walled models of very high pressure centrifugal blower fans. Thin-walled blower fans have an epoxy coating and can be supplied ...

Air flow: 3 m³/min - 70 m³/min
Diameter: 50 mm - 200 mm
Noise level: 50 dB - 90 dB

The Sirocco Blower is a futural device. Designed by Chuan-Fan Electric Co. Ltd. it is utilized for over, plastic and printing industries ventilation as well as for drying and cooling purpose machinery ventilation. It ...

Air flow: 800 m³/h - 120,000 m³/h

9-19/9-26 Series High Pressure Centrifugal Fan Product Description Product Parameters • Purpose: high pressure ventilation,such as forging furnace ...

Air flow: 1,500 m³/h - 190,000 m³/h

... 1.400 mm diameter Hot dip galvanized sheet metal fan casing Cast aluminum adjustable blade angle impellers Aerodynamic profiled impellers allow high efficiency and low noise Die cast aluminum alloy ...

Air flow: 0 m³/h - 5,410 m³/h
Diameter: 420 mm
Noise level: 84 dB

... ventilation. The PV 6000 provides a maximum airflow with adequate low electrical power. The fan also transports the air over long distances and with high counter-pressure. Hose operation ...

Air flow: 409, 360 m³/h

... Since most of the pressure build-up takes place in the impeller, there is generally no need for a scroll housing. The centrifugal fans have very good hydraulic efficiency and are ideally suited for high ...

Air flow: 515 m³/h
Diameter: 119 mm
Rotational speed: 11,000 rpm

... speed or current), using unique materials (fan frame, fan blades, circuit board, etc.), our fan air volume will be greater. 2.Low Noise: The use of ultra-quiet materials and user-friendly ...

Rotational speed: 3,000 rpm

... used to supply necessary air pressure in pneumatic conveying lines. High Pressure Fan is required for high pressure and low/medium flow ...

Air flow: 50 m³/h - 1,600 m³/h

The U/AP series centrifugal fans are designed to take up fumes or air, even slightly dusty, at temperatures of up to a maximum 80°C. These fans are employed in all industrial plants where medium-to-high ...

Air flow: 10,000 m³/h

High available pressure (up to 7000Pa). Fan in networks with high pressure drops. Direct drive. Range consists of 8 models. Flow ...

Air flow: 17 m³/min - 72 m³/min

Air flow: 300 m³/h

Secomak introduces 575 High Velocity Centrifugal Fans. These fans provide lesser volumes but higher maximum pressures of up to 48 w.g. The air flow is ...

Gas-tight fans Better sealing for special gases For processes which require better sealing of the components, for example when transporting aggressive or toxic gases, we equip our fans with multi-chamber ...

... Characteristic 1.Applicable to high airflow; 2.Applicable to high pressure; 3.Applicable to larger system resistance and limited internal space. Application 1.Coil Units; 2.Air ...

Air flow: 280 m³/h - 6,000 m³/h

... plastics processing), airflow in combustion / heat treatment systems (e.g. melting furnaces) etc. Construction High-pressure centrifugal fans with direct drive. Riveted impeller made ...

Air flow: 2 m³/min - 315 m³/min

... air feeding of cupolas, in foundries and in diesel oil burners, in mills, pasta factories, chemical, siderurgical and metallurgical industries where the fans with low flow rates and medium and high ...

Air flow: 2,000 ft³/min - 145,000 ft³/min

Belt Drive - Vane Axial fans are designed for commercial and industrial applications where large volumes of air are required at moderate to high pressures. Belt drive ...

Air flow: 100 m³/h - 2,700 m³/h

Air flow: 0 m³/h - 4,000 m³/h

CENTRIFUGAL FAN Type : V SOD HP Industrial ventilation Centrifugal high pressure single inlet fan, steel pressed casing and radial vanes wheel out of painted steel, ...