Hollow-plunger cylinders

Stroke : 12 mm
Force: 60 kN - 104 kN

Manual positioning of the element on the die clamping edge. Clamping by the application of hydraulic pressure to the piston and unclamping by spring force. By means of the T-bolt the die is clamped against the clamping ...

Stroke : 75 mm
Force: 1,107.8 kN

Single acting, spring return hollow plunger cylinder. Standard supplied with: High Flow female coupler A 118 Hollow saddle, with the exception of the HHJ 5 S 2.5, ...

Stroke : 50 mm
Force: 126.7 kN

Single acting, sping return hollow plunger cylinder. Standard supplied with: High Flow female coupler A 118

Stroke : 50 mm
Force: 169.6 kN

Single acting, spring return hollow plunger cylinder. Standard supplied with: High Flow female coupler A 118 Hollow saddle, with the exception of the HHJ 5 S 2.5, ...

Stroke : 50 mm - 160 mm

CRM-FO Series are hollow plunger cylinders, designed for cable tensioning operations, positioning bars in tensile structures, pulley assembly and disassembly, and cable and tie rod pulling ...

Stroke : 50 mm - 260 mm
Force: 29.4 kN - 1,435 kN

... make them easier to carry. FPT - Fluid Power Technology: https://www.fpt-worldwide.com/en/products/double-acting-hollow-plunger-cylinders/

Stroke : 50 mm - 260 mm

CRI-FO Series Hollow cylinders with oil return CRI-FO Series are cylinders with a hollow center. Designed for cable tensioning operations, positioning bars in tensile ...

Stroke : 25, 50, 76, 150, 152 mm

The single-acting hollow piston cylinder offers capacities of 11 to 102 t. The cylinder has a spring-assisted return feature. Its stroke is from 25 mm to 150 mm. It has ...

Stroke : 8 mm - 20 mm
Force: 5 kN - 32 kN

... hydraulic actuation. When workpieces are clamped onto a machine tool table, the hollow rod cylinder can be fitted over the clamp bolt instead of the nut. The hollow rod cylinders ...

Force: 58.84 kN - 1,078.73 kN

... return SLE cylinders : single acting, with lock nut, spring return SLT cylinders : single acting, telescopic, load return SLC cylinders : hollow piston ...

Force: 264.78 kN - 1,961.33 kN

... Different types of cylinders available : QSR cylinders : single acting, spring return QER cylinders : single acting, with lock nut, spring return QCR cylinders ...

Force: 49.03 kN - 4,903.33 kN

... acting, spring return SRP cylinders : extra-plat, single acting, spring return CSE cylinders : hollow piston rod, single acting, spring return CDE cylinders ...

Speed: 0.5 m/s

Stroke : 0 mm - 500 mm

Cylinders with hollow piston rod for vacuum technology, with compact dimensions thanks to the coaxial piston rods structure instead of the traditional through-rod configuration, ...

Stroke : 8 mm - 150 mm

Stroke : 8 mm - 155 mm
Force: 125,000 N - 931,000 N

Enerpac's hollow plunger cylinders are utilized in maintenance, tensioning and testing applications. They are single-acting with a spring return and have been designed specifically to ...

Stroke : 25 mm - 152 mm

... single acting hollow piston cylinder range is extremely versatile for use in tooling, maintenance and tensioning applications. Specifically designed with a hollow piston ...

Stroke : 52 mm - 66 mm
Force: 123 kN - 1,010 kN

REHOBOT CHFA-series cylinders are all made of high-tensile aluminum providing an excellent service life in low cycle applications. They have an outstanding power to weight ratio – weighing approximately 50% less than ...

... hole diameter. * Cylinder body and piston are made from massive chromium-molybdenum steel and heat treated. * Hard-chromium plated piston with replaceable, heat treated saddle. ...

Stroke : 40 mm - 150 mm
Force: 120 kN - 930 kN

Stroke : 50 mm - 100 mm
Force: 120 kN - 377 kN

LUKAS hollow-piston cylinders are used to lift loads and to pull fixed elements from rods, push in bearings or tension steel cables. They are particularly light (up to 40% lighter than comparable steel ...

Stroke : 0.31 in

... for fast retraction. Designed for both push & pull forces. Collar threads for easy fixturing. Induction hardened piston for added strength.

The Werner Weitner GmbH Hollow Piston Cylinders is made up of a special steel. This device has a working pressure that reaches up to 700 bar maximum. The Hollow Piston ...

Stroke : 0 mm - 150 mm
Force: 121 kN - 1,018 kN

... and bolts, pulling sleeves and bearings. Hollow hard chrome-plated piston. Collar threads, piston end thread and base holes for easy fixing. Interchangeable with our complete puller range ...

Stroke : 50 mm - 160 mm
Force: 123 kN - 947 kN

The single-acting hydraulic cylinder from the CMF Series is designed with a smooth hollow plunger that twists into the bore of the rod. It is equipped with an anti-wearing property to ...

Stroke : 10 mm - 20 mm
Force: 12,000 N - 100,000 N

The pistons of the cylinders in this series have a threaded direct through hole permitting the fitting of pins and tie-rods for push or pull applications. The housing with rib collar and holes within the base permits ...

Stroke : 0.31 in

... wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent ...

Stroke : 89 mm - 258 mm
Force: 541 kN - 4,144 kN

... center tube increases product life . Hollow plunger allows for both pull and push force. All model with quick coupling and dust cap . Plunger wiper reduces dust contamination ...

The hollow piston pneumatic cylinder, manufactured by ITT Compact Automation, is a custom frame and hollow rod that incorporates several attributes such as window cut ...

It is a versatile single-action hollow cylinder with 3 strokes and a total of 30 different types to choose from. -It can be used in small spaces due to its compact flange design. -The range of use can ...

Stroke : 0.25 in - 0.5 in

... pressure Also called "Power Nuts," hollow cylinders will draw or tighten an appropriately sized bolt to clamp or actuate remote mechanisms Keyhole shaped bodies make maximum use of space, sized ...