Standard cylinders

Stroke : 10 mm - 1,000 mm
Force: 18 N - 450 N
Speed: 10 mm/s

The new Series 23 pneumatic cylinders are based on the innovative concept of ‘auto-cushioning’ and comply with the ISO 6432 standard. The cylinder, thanks to a patented system*, automatically ...

Stroke : 10 mm - 1,000 mm
Speed: 10 mm/s - 1,000 mm/s

This crimped single and double acting cylinder has a stainless steel barrel and rod, anodized aluminum end-caps, NBR/PU seals and aluminum piston. The brackets may be rod end, feet, flange or trunnion fixing. The ...

Stroke : 10 mm - 2,500 mm
Speed: 10 mm/s - 500 mm/s

The Cylinder Series 40 is a high-performance, double-acting cylinder with tie-rods that operate at a pressure of 1-10bar, speeds without load of 10-500mm/sec and temperatures of 0°C and 80°C (dry air ...

Stroke : 50 mm - 500 mm
Force: 600 N - 6,000 N

The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The dimensions of the pneumatic cylinder comply with ISO ...

Stroke : 5 mm - 500 mm

Com pod cylinder to ISO 21287, UNER series, available in different versions to meet all possible requirements: •With or without magnet •Double oding, single or through piston rod •Double oding, perforated through piston ...

Stroke : 1 mm - 500 mm

Mini-cylinders to ISO 6432 with a chamfered stainless steel barrel. The cylinder head dimensions have been reduced for some sizes so that they can be used where there are space restrictions. Can be used ...

Stroke : 50 mm - 300 mm
Speed: 0.15 m/s - 0.6 m/s

EAC Series Electric cylinders with absolute sensor with/without integrated controller Linear slide size: 28 mm x 28 mm - 60 mm x 156 mm Drive method: ball screw Stroke: 50-300 mm Pushing force: 40-500 N Thrust force: ...

Force: 8 N - 93 N
Speed: 6.81 m/s - 13.25 m/s

... pick & place applications. It is also an extremely cost-effective and energy efficient alternative to traditional pneumatic cylinders, especially applications that demand both flexibility and control. - Direct drive ...

Stroke : 0.9 m - 4.2 m
Force: 10.3 kN - 660 kN
Speed: 0.1 m/s - 0.5 m/s

210 bar Industrial Hydraulic Cylinders conforming to DIN 24554. The tie rod construction sets the standard for performance, durability and trouble-free operation with superior design and quality to ensure ...

Force: 4 kN - 969 kN
Speed: 0.1 m/s - 12 m/s

... Mill' type hydraulic cylinders are premium quality, heavy duty cylinders which are fatigue-free at their full rated pressure of 250 bar. Designed for use in steel mills and similar demanding applications, ...

Stroke : 0.011 in - 31.978 in
Torque: 2.3 ft.lb - 140 ft.lb

... acting cylinder is an example of our industry leading product breadth in non-repairable cylinders. •Bore sizes: 9/16", 3/4", 1-1/16", 1-1/2", 2" •3 Model Options: Standard; Magnetic ...

Stroke : 0.125 in
Force: 195.72 N

Space Saver® Space Saver® cylinders provide the power and stroke of standard cylinders in less than half the space. They are ideal for use in machinery where space and weight are at ...

Stroke : 0.125 in - 120 in

... •Self-Alignment Feature-Floating Rod Bushing: -Reduces cylinder drag and erratic operation -Reduces cylinder wear •Made to Order: -Each cylinder is made to order -Customize each ...

Stroke : 1 mm - 500 mm
Force: 51 N - 7,363 N

Festo pneumatic cylinders are ideal for industrial applications, with piston diameter range of 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 mm and male and female threads. The stroke length is 1 - 500mm. Fixed cushioning, ...

Stroke : 1 mm - 25 mm
Force: 59 N - 4,510 N

Diameter: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm Stroke length: 1 ... 25 mm Force: 59 ... 4510 N Single-acting, pushing/pulling Fixed cushioning Special features: Single-acting, pushing/pulling

Stroke : 5 mm - 80 mm
Force: 188 N - 1,178 N

Diameter: 20, 25, 32, 40, 50 mm Stroke length: 5 ... 80 mm Force: 188 ... 1178 N Double-acting Position sensing Fixed cushioning Special features: Polymer bearing caps and end caps

Overview The stem conditioning cylinder is the ideal way to achieve today's standard stem moisture levels of 34% to 36%. Due to their long dwell time in the cylinder's controlled warm, ...

Stroke : 10 mm
Force: 1.5 N - 50 N

... Electric Cylinders have been designed to offer a long life cycle and much more precise and repeatable force control and positioning, and are the first linear motors to challenge conventional LVDT devices. Available ...

Stroke : 60 mm - 1,200 mm
Force: 9.8 kN - 100.5 kN
Speed: 0.25 m/s - 0.5 m/s

... valve function for unthrottled cylinder start ● Fixing thread and centring spigot at both cylinder heads allow mounting of non standard accessories ● Particularly suitable for fixture ...

Stroke : 50 mm - 1,500 mm
Speed: 3,000 mm/min - 30,000 mm/min

... Hard anodised aluminium cylinder tubes offer a high resistance to corrosion and low internal friction. Non-standard type Custom cylinders are available as are non standard ...

Stroke : 32, 40 mm
Speed: 0.05 m/s - 0.5 m/s

... design & Non lubrication Cylinder with hexagonal rod design enables non-rotation of rod. Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium ...

Stroke : 50 mm - 1,900 mm

MDHB:Standard type, MDHD:Double end rod type, MDHN:Adjstable foward stroke cylinder. Tube I.D. φ40~150 (mm).

Stroke : 60 mm
Force: 1,029.3 kN

Single acting, gravity return cylinder. Standard supplied with: High Flow female coupler A 118 Flat saddle

Stroke : 150 mm
Force: 1,029.3 kN

Double acting, hydraulic return cylinder. Standard with High Flow female coupler A 118 on inlet port, High Flow female coupler with pressure relief valve A 418 on outlet port and flat saddle.

Stroke : 150 mm
Force: 1,538.9 kN

Single acting, gravity return cylinder. Standard supplied with: High Flow female coupler A 118 Flat saddle

In addition, we furnish cylinders up to 250 bar. In line with customer requirements, we also develop special cylinders according to individual specifications. All cylinder versions ...

Stroke : 10, 25, 40, 50 mm

... 8 Neoprene Bumper 9 Brass Piston 10 Polyurethane Piston seal 11 Bonded Ferrite Magnet 12 Stanless Steel AISI 304 Mini cylinder shape body 13 Anodised aluminium Back cover Pressures 1 bar (0.1 MPa) 10 bar (1 ...

Stroke : 10 mm - 320 mm

... 8 Neoprene Bumper 9 Brass Piston 10 Polyurethane Piston seal 11 Bonded Ferrite Magnet 12 Stanless Steel AISI 304 Mini cylinder shape body 13 Anodised aluminium Back cover Pressures 1 bar (0.1 MPa) 10 bar (1 ...

Stroke : 10 mm - 320 mm

... 8 Neoprene Bumper 9 Brass Piston 10 Polyurethane Piston seal 11 Bonded Ferrite Magnet 12 Stanless Steel AISI 304 Mini cylinder shape body 13 Anodised aluminium Back cover Pressures 1 bar (0.1 MPa) 10 bar (1 ...

Stroke : 32 mm - 125 mm

With the typical ISO 15552 VDMA, the Airwork's cylinder ISO 6431 series CY are created. It specifically have bores made up in between 32 and 125 mm. Its double effect, cushioned and magnetic shows where the precision ...

Stroke : 160 mm - 200 mm

The Cylinders ISO 15552 - CQ Series, which are manufactured by Airwork, are pneumatic cylinders with bore size ranges from 160 mm, and up to 250 mm. They have a double effect function which is to indicate ...

... cartridge without disassembling the cylinder. Over 20 NFPA standard mounting options. Pressure rated to 3000 PSIG hydraulic service. 7 standard piston seal options. 4 standard ...

Stroke : 25 mm - 1,000 mm
Speed: 0.05 m/s - 0.5 m/s

Series FAQ2R is an ISO-6431 compliant cylinder. Updated extruded body is designed for flush mounted sensors with a clean outside shape.

Speed: 0.3 m/s

... The EHZ is a hydraulic cylinder, which can be operated at an operating pressure of up to 250 bar. The EHZ standard cylinder is characterised by good sealing properties and its small size. Owing ...

Stroke : 10 mm - 500 mm
Force: 16 N - 250 N
Speed: 2 m/s - 5 m/s

The ISO 6432 Microcylinders Series M is designed in a double-acting and simple-acting version, with ambient temperature of -20 to +80 °C. It has a fluid filtered air, lube or non lube with a working pressure of 1, 5 or 10 bar. Its bore ...

Stroke : 10 mm - 50 mm
Force: 4 N - 23.5 N
Speed: 2 m/s - 5 m/s

... use filtered air, lube or non-lube as its fluid. It has a working pressure of 1,5 ÷ 10 bar. The diameter measurement of its cylinder is Ø 008-010-012-016-020-025 mm. Its stroke ranges from 0010 ÷ 0500 mm.

Stroke : 32 mm - 125 mm

The ISO 15552 are pneumatic cylinders that are part of the KL series. They can either be double acting or simple acting for the available models. The units can also work to an ambient temperature pf -20 ÷ +80°c, and ...

Stroke : 50 mm - 1,500 mm
Force: 60 kN
Speed: 10 mm/s - 500 mm/s

Servo electric cylinder working principle:Servo electric cylinder is a modular product designed by integrating servo motor and ball screw, which converts the rotary motion of servo motor into linear motion, ...

Stroke : 50 mm - 1,000 mm
Force: 1,000 N
Speed: 250 mm/s

FDR series screw driven cylinder/ linear actuator is our newest product. As it’s driven by the high precision servo motor, it works with super high precision that the pneumatic and hydraulic cylinder ...

Stroke : 50 mm - 1,000 mm
Force: 20 kN - 200 kN
Speed: 25 mm/s - 250 mm/s

... Series heavy load electric cylinder for industrial automation application, replacement for pneumatic cylinder. Driven by electric cylinder, works with high precision, high thrust, high ...

Stroke : 80 mm
Force: 3,016 N

... long life •Switches can be mounted flush with the profile barrel Operation:Double acting Standard:ISO 15552 Stroke length:80 mm Port size:G3/8 Cylinder diameter:80 mm Series:ISOLine

Stroke : 25 mm
Force: 294 N

... mounting nut and piston rod locknut as standard Operation:Double acting Standard:ISO 6432 Stroke length:25 mm Port size:G1/8 Cylinder diameter:25 mm

Stroke : 100 mm
Force: 12,064 N

... acting cylinder, 160mm diameter, 100mm stroke ITEM: RA/8160/M/100 •Conforms to ISO 15552, ISO 6431, VDMA 24562 and NFE 49-003-1 •High performance, ruggedness and reliability •Extensive range of mountings Operation:Double ...

Speed: 0.4 m/s - 1 m/s

Hydraulic round cylinder manufactured according to ISO 6020/1 Standards. Available in bore from 25 to 320mm and with small o big piston rod. Typical applications: offshore, transhipment and material ...

Features: Available in diameters from 25 to 200mm, and with any stroke length Tie rod cylinder Normal and strengthened rod Varied fixing elements Normal, high temperature and low friction sealing Adjustable cushioning ...

AirControl Metals offers both standard ISO cylinders and customised cylinders for special requirements, with its usual flexibility in service and quality in materials. In accordance with ...

A product line extension for "CAT" cylinders by Cy.Pag. S.r.l.: - ISO 15552 standard, with tie rods; - Bores from 32mm to 320mm - Double thrust or multi-position versions; - Covers are made in diecast ...

Stroke : 10 mm - 500 mm
Force: 482 N - 7,359 N

Covers: Painted die-cast aluminum Tube: Anodised aluminum Seals: Polyurethane - NBR Guide bush: Sintered bronze Piston Rod: Chromium coated steel Max pressure: 10 bar Operating temperature: -20 ° C + 80 ° C with dry air Fluid: ...

Stroke : 10 mm - 500 mm
Force: 12,058 N - 18,840 N

Covers: Painted die-cast aluminum Tube: Anodised aluminum Seals: Polyurethane - NBR Guide bush: Sintered bronze Piston rod: Chromium coated steel Tie rods: Chromium coated steel Max pressure: 10 bar Operating temperature: -20 ° ...

Stroke : 50 mm - 1,500 mm
Force: 0 N - 10,000 N
Speed: 80 mm/s - 150 mm/s

... , Panasonic, Yaskawa, and other brands; Delivery for standard products: within 7-10 working days Categories: Hot Sales, Stepper Electric Cylinder, Straight Electric Linear Actuators Tag: Cylinder ...

Stroke : 50 mm - 1,500 mm
Force: 0 N - 800 N
Speed: 0 mm/s - 500 mm/s

... AC/DC stepper motor drive: such as Delta, Mitsubishi, Panasonic, Yaskawa, and other brands; -Delivery time for standard electric cylinders: within 7-10 working days *Motor power（W）:1000/ 1500 Motor ...

Stroke : 1 mm - 50 mm

Stroke : 25 mm - 500 mm

Stroke : 107.5 mm - 185 mm

Double-acting cylinders with rod. Possibility of having hardware with spherical or conical pin; elettroricalcati stems, hardened and chrome-plated rod extruded cold. Cylinders extremely versatile and ...

... tightening of the retaining nut of the piston and the cylinder head is controlled by a computerized system so as to ensure a correct and constant coupling on the stem. For their traceability cylinders ...

They all have the hardened and chrome plated piston rod, rod guide rings are made ​​of metal or guide shoes high load capacity. Seals can be watertight, low coefficient of friction (to eliminate the phenomenon of stick-slip). Working ...

Stroke : 50 mm

... been realized according to ISO 6432 Standard. The selection of raw materials and the adopted technical solutions do guarantee strength and reliability over time. The cushioned version is recommended when the cylinder ...

Stroke : 16 mm - 25 mm

The ISO 6432 INOX mini-cylinders are particularly recommended for applications In working environments where there is contact with ag- gressive or corrosive agents, which require the use of high-resistance materials. The ...

Stroke : 32 mm - 100 mm

... design and very compact dimensions make this cylinder particularly suitable for applications in small spaces and the most complex industrial automations. Aircomp cylinders Line 230 are available in single ...