Stroke : 15 mm - 500 mm
Force: 10 N - 110 N
Pressure: max 10.0 bar
... to textiles, from woodworking machines to the ceramic sector andso on. MICROCYLINDERS ACCORDING TO STANDARD ISO 6432 THREADED END COVERS VERSION
Stroke : 5 mm - 20 mm
Bore: 6 mm - 10 mm
... standard; they are single acting with a front spring, can be either hexagonal or round bodied and either completely threaded or threaded with a plain rod ending. They are available with M5 connections ...
Stroke : 10, 15, 5 mm
... air without lubrication. Oil ISOVG32 is recommended if lubrication is required. The mounting method of this cylinder is by means of a threaded body.
Stroke : 15, 10, 5 mm
Sinale-octing micro-cylinders with threaded body for fixing in small spoce or airedly inside the mochine body, owing to the external Oring which ensures perfect seal. ATTENTION: in case of cycles with ...
Stroke : 0.25 in
... miniature air cylinders offers users a wide range of low-profile linear actuators. These versatile cylinders are available in both single-acting and double-acting models. They are ideal actuators in ...
Stroke : 571 mm
Force: 2,670 N
Speed: 0.3, 0.8 m/s
... aluminum, hard-coated anodized and Teflon-impregnated cylinder housing • Polyurethane wiper seal • Carbon steel acme or ball screws Options • Standard or custom lengths to 0.1 inch • Threaded, ...
Stroke : 5 mm - 160 mm
Pressure: 200 bar - 315 bar
Rod diameter: 25 mm - 125 mm
Cylinders with tie rods double acting, bores 25mm to 125mm, standards strokes and on demand. Maximum operating pressure at 200 bars with standard using temperature at 80°C and 150°C with viton seals. End of rod choice ...
Stroke : 75, 150, 160, 200, 260 mm
Force: 27.5 kN - 1,435 kN
... return system strokes can be longer than in cylinders with a spring return. Thanks to the oil return system, return times are shorter and under all operating conditions. • With the threaded body cylinder ...
Stroke : 25 mm - 300 mm
Force: 549.8 kN - 5,987 kN
FPT high tonnage lock nut hydraulic cylinders, with gravity return. CSE GS Series are with the threaded safety ring, the load can be mechanically locked and held for extended periods of time even when ...
Stroke : 50 mm - 250 mm
• Cylinders designed for heavy lifting, to support and hold bridges, viaducts and heavy structural steelwork. • Hydraulic cylinders with gravity return, max pressure 700 bar • The end-stroke ring ...
Stroke : 10 mm - 320 mm
Force: 30 N - 295 N
... extreme stresses - Bronze guide bushing to reduce the axial clearance when rod is fully extended MC Series – ISO 6432 Cylinders Airwork’s ISO 6432 microcylinders are manufactured with the highest quality levels and ...
Stroke : 160 mm - 250 mm
Epoxy coating of both cylinder's heads to protect them from external agents and to improve cylinder's aesthetics Polyurethane high resistance seals for piston and rod Several sealing options: ...
Stroke : 6 mm - 16 mm
... machine Threaded or smooth rod Cartridge cylinders CH series have extremely reduced dimensions. Secondly, thanks to the threaded body it can be installed in any part of the machine. The ...
Stroke : 5 mm - 15 mm
... micro-cylinders are available in three bores (6, 10, 16), each bore in three stroke (5, 10, 15) and in two versions: threaded or non-threaded piston rod.They are used in applications ...
Stroke : 12 mm - 18 mm
Force: 20 kN - 48 kN
Work supports Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the workpiece surface irregularities, also deflection and vibration under machining ...
Stroke : 6.5 mm - 10 mm
Force: 0.3 kN - 10 kN
Threaded-Body Work Supports Advantages ● Side load up to 0.3 kN admissible (B1.9472) ● Space-saving threaded-body version ● Support in recesses and cavities (B1.9472) ● High process safety by double-acting ...
Stroke : 8 mm - 100 mm
Force: 10 kN - 156 kN
... external thread ● Lock nuts as per DIN 1804 can be used ● Space-saving fixing in fixture walls ● Swarf-protected tubing is possible ● Piston rod with internal thread for fixing of different contact ...
Stroke : 50 mm - 250 mm
LOCK NUT ALUMINUM CYLINDERS - ALNC • Can both lift and mechanically secure a load. • Trapezoid threaded rod for quick adjustment of the lock nut. • Capacity from 20-100 ton. • Built-in return spring. • ...
Stroke : 200, 300 mm
Force: 6, 20, 50, 100, 160 kN
Speed: 0 mm/s - 160 mm/s
Stroke : 25 mm - 2,500 mm
Force: 482 N - 18,840 N
... industry. On request it is possible to obtain the cylinders with FKM seals for high temperatures (-20 ° C | + 150 ° C) or for low temperatures (-40 ° C | + 80 ° C), and special versions. The 6E series cylinders ...
Screw In Cylinder - Round Short-Stroke Cylinder - External thread means it can be integrated in a tool - Very small size for small installation areas - Piston rods ...
Stroke : 0 mm - 150 mm
Force: 121 kN - 1,018 kN
... Collar threads, piston end thread and base holes for easy fixing. Interchangeable with our complete puller range Hollow plain saddle as standard. Optional solid or threaded saddles available. ...
Stroke : 0 mm - 150 mm
Force: 217 kN - 1,407 kN
Capacity from 22 to 100 Tn, stroke up to 150 mm. Lightweight hollow spring return cylinders. Over 40% weight reduction when compared with steel equivalent. Made of hard anodized high strength aluminium alloy. ...
Stroke : 0 mm - 250 mm
Force: 173 kN - 1,408 kN
... resistance. External safety valve to prevent accidental over-pressure. Hollow plain saddle as standard. Optional solid or threaded saddles available. Not suitable for high cycle applications.
Stroke : 8 mm - 200 mm
Force: 1.2 kN - 392 kN
Block cylinders are popular design elements in all areas where very powerful short strokes are required. Block cylinders have internal piston rod threads for secure screw-in contact bolts. Their compact ...
Stroke : 50 mm - 63 mm
Force: 4.9 kN - 156 kN
... joint heads standard cylinders and special design available The image shows a block cylinder with external threaded piston together with accessories joint head and bearing support. The ...
Stroke : 12, 10, 8 mm
Force: 1.1 kN - 235 kN
... double-acting block-cylinders. The pull cylinder is available in various designs with threaded port or manifold connection with O-rings. When mounting the pull cylinder, ...
Stroke : 5, 10, 15 mm
... acting cartridge cylinders Line 200 have been developed for being installed in particularly small spaces. The thread along the whole body length allows the "through wall" mounting so as to further reduce ...
Stroke : 0.22 in
Versatile threaded body cylinders can be used for a variety of high production applications such as workpiece positioning, locating, clamping, ejecting and punching. single and double acting versions ...
Stroke : 26, 27, 29 mm
Clamp cylinder operating in rod retraction, with a combined clockwise or counterclockwise stroke and a linear stroke for tightening. Possible rotation angles 45°, 60° and 90°. Mounting by square base or threaded ...
Stroke : 50, 45, 51 mm
... periods, such as bridge support work. The HFL range features a single acting load return piston, threaded throughout its stroke length to suit the threaded mechanical load holding lock ring. All models ...
Stroke : 8 in
... DU series tie rod hydrauilc cylinders have been designed for use where an 8" stroke ASAE mechanical depth stop cylinder may be required. The DE-ASAE incorporates the depth-control collar. The DU cylinders ...
Stroke : 10 mm - 500 mm
Force: 104 N - 247 N
Pressure: 1 bar - 10 bar
... SERIE Z range, cylinders with bore 16, 20, and 25 mm), but it maintains all technical characteristics of ISO 6432 cylinders. SERIE Z pneumatic cylinders are entirely made of AISI 304 ...
Stroke : 0 mm - 1,800 mm
Speed: 0.5 m/s
Pressure: 250, 280 bar
... Thus, hydraulic cylinders with the head-bush fixed on the locking ring can be operated at a rated pressure of up to 200 bar. Hydraulic cylinders with a threaded head-bush already operate ...
Stroke : 50 mm - 600 mm
... ELECTRICAL CYLINDERS LOOKS LIKE THIS Typical of the electrical cylinders (FlexLine) is the aluminium profile. Fastening plates, limit switches and reed contacts can easily be attached there later on. ...
Stroke : 14 mm - 24.5 mm
Force: 2.2 kN - 13.9 kN
Link clamp cylinders stand out for high clamping forces and minimum space requirements. Easy positioning and precise alignment during operation are ensured with threaded models. Link clamps are available ...
Your suggestions for improvement:
Receive updates on this section every two weeks.