Inner diameter: 6.5 mm - 11 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 85 °C
... Compressed air spiral hoses made of polyurethane are equipped with rigid coiling fittings and a buckling protection. Special Features: high flow rates at allowable working pressures up to 10 bar / 145 psi (at room temperature) ...
Inner diameter: 12 mm - 58.9 mm
Pressure: 2 bar - 5 bar
Temperature: 0 °C - 100 °C
... Purpose TO grade hose (available in both GP and AS) is a lightweight hose, used in applications where working pressures are low and where there is no need for the physical protection offered by an external braid. TO ...
AFLEX HOSE LTD.
Outer diameter: 32 mm - 500 mm
... the material Fusiolen PP-R/PP-RCT. These are insulated with PUR foam and enclosed with a casing pipe made of HDPE. The pre-insulated aquatherm energy pipe is particularly suitable for energy-efficient heat and cold ...
Inner diameter: 38 mm - 500 mm
Outer diameter: 46 mm - 510 mm
Pressure: 0.08 bar - 0.63 bar
... to ISO 8031 electrical and surface resistance Technology / Technical Information / REACH DESIGN patented PROTAPE® tape hose 1. spring steel wire integrated in wall 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®) 3. ...
NORRES Schlauchtechnik GmbH
Inner diameter: 0.8 mm - 25.4 mm
Delivered length: 15 m
Designed for high-purity applications, Longerpump Silicone Tubing's ultra-smooth inner bore can reduce the risk of particle entrapment and microscopic buildup during sensitive fluid transfer. In-house analysis of the inner surface of Sanitary Silicone ...
Baoding Longer Precision Pump
Inner diameter: 30 mm - 203 mm
Pressure: 10 bar - 28 bar
Temperature: -20 °C - 80 °C
... Hose for transfers, drainage, irrigation installations, sewage pumping, slurry and fertilizers, irrigation cannons, temporary installations (bypass), etc. Standard length: Available in 60m lengths. Other lengths on request (up to ...
KURIYAMA EUROPE
Inner diameter: 6 mm - 32 mm
Outer diameter: 15.4 mm - 44 mm
Pressure: 28 MPa - 56 MPa
... radius is 50% lower than DIN EN853 standard; high-pressure-pressure is 30%~40% higher than DIN EN853 standard; long life. Hose Fitting：It adopts high-quality carbon structural steel, the core material is 45# steel, the nut material ...
Luohe Letone Technology Co., Ltd.
Outer diameter: 0.75 in
Pressure: 20 bar
Temperature: 0 °C - 25 °C
... Pressure PN : 20 bars for flexible hose Ref.1371 et 1373 1 bar for discharge flexible with support Ref. 1372,1374 and 1375 Flexible hose 90° ends - Female / - Female ...
Inner diameter: 2 mm - 13 mm
Outer diameter: 4 mm - 16 mm
Temperature: -10 °C - 40 °C
... - Made of polyethylene (PE) - External calibration; for use with Eisele plug connectors - Free of plasticizer and halogen - Color: natural, black, red, blue, green, yellow, grey - Temperature range: -10 to +40 °C (14 to 104°F) ...
EISELE GmbH
Inner diameter: 40, 25 mm
... Semi-Rigid hose manufactured in accordance with NF S 61-115 - Great for industrial, construction or Wash Down - Standard in 50' & 100' lengths - Standard in 65' & 130' lengths - Hose is available in 1.0 , 1.25 and 1.5 ...
POK
Inner diameter: 0.5 mm - 25.4 mm
Outer diameter: 3.17 mm - 38.1 mm
... Overview
Imapure® Platinum Cured Silicone
Tube is designed for peristaltic pump and fluid transfer in pharmaceutical and biotech applications. It is a translucent silicone tubing with an ultra-smooth bore to prevent particle ...
Ami Polymer Pvt. Ltd
Inner diameter: 6 mm - 25 mm
Outer diameter: 16.5 mm - 40.1 mm
Pressure: 0 bar - 420 bar
... Four spiral high pressure hoses according to EN 856 4SP standard for hydraulic systems with a rated pressure up to 380 bar. Universal high pressure hoses for high pressure hydraulic systems. A long service life makes ...
Inner diameter: 6.4 mm - 76.2 mm
Outer diameter: 10.5 mm - 88 mm
Pressure: 30 bar - 2,000 bar
... The Interpump high performance range features a wide collection of hoses that exceed International standards. Many of the hoses within the range are designed from specific customer requirements, giving them additional ...
IMM Hydraulics
Inner diameter: 100 mm - 1,650 mm
Temperature: -40 °C - 260 °C
Delivered length: 80 m - 1,500 m
... Pure woven PTFE; can be used in high temperature applications to 260°C / 500°F and with caustic or acid products.Compliant with: FDA 21 CFR 177.1550. Teflex Woven is made from pure woven PTFE and can be used in high temperature applications and with ...
BFM Global Ltd.
Inner diameter: 33, 25, 12, 11 mm
Outer diameter: 25, 19, 18, 16 mm
Pressure: 5, 6 bar
... *Powder coating
hose for painting system.
*transparent
hose, clearly showing work status of the flow.
* Super
Flexible design, easy installing. tough wall and elastic
hose.
* ...
Foshan Chanle Plastic Products Co.,Ltd.
Inner diameter: 3.3 mm - 24.7 mm
Outer diameter: 2 mm - 25 mm
Pressure: 40 bar - 260 bar
... -2008 standard certified workshops, to meet your needs. Customized or standard hydraulic hose Pneumatic hose PTFE hose High-temperature casing guard Guardian sleeve Complete Kits : control, marking, ...
Inner diameter: 9.6, 12.7 mm
Pressure: 0 bar - 28 bar
Temperature: -20 °C - 120 °C
... Working Temperature Range Dynamic Conditions : -5°C - +90°C Structure Medium pressure water hose with special mixture of powder rubber Kink resistant, smooth outside and abrasion resistant Available in red and blue color, please ...
Inner diameter: 40, 50 mm
Delivered length: 10 m
... Industrial hose reel ø 40mm to be fixed at the wall or steel structure directly in connection with steel pipes Ø50. With micro switch, and gate valve for automatic closing. With IP55 microswitch and built-in valve; ...
Starvac
Inner diameter: 4 mm
Outer diameter: 8.6 mm
Pressure: 210 bar
... Long description - High pressure hose - Application - Central lubrication system for stationary and mobile applications Flexible connections between individual components - Properties - Inner ...
Kramp
Delivered length: 6 m
... 6m hose for Fill’n Drive, Fill’n Ride and Fill’n Fly ...
Inner diameter: 19 mm
... 32, which consists of 8 metre transparent hose Ø 19 with a steel core, 4 steel clamps and different couplings, depending on the model chosen. Can be combined with all our pumps for AdBlue® and AUS 32; the hose provided ...
transfer hoseJP-07 BLUE
Inner diameter: 1.5 mm
... adapters (depending on the pump made of NBR, EPDM or FKM), suitable for bunghole diameters from 46.5 to 60 mm, thus ensures a flexible adaptation to all common bunghole openings. For the assembly of the pump no special tools are required. The ...
Dr. Jessberger GmbH
Inner diameter: 0.375 mm
Pressure: 700 bar
... Holmatro hose for high pressure hydraulics. No coupler(s) included Features & benefits: Suitable for high pressure hydraulics / max 700bar working pressure Anti-kink spring on both sides All hoses are individually ...
the best suppliers