... range -200°C to +200°C depending on material Matching accessories Combination shears, scissors etc. can crush the tube ends. The SERTO " Hose Cutty" AC 835 is the ideal tool for clean cutting. Conformity PTFE, PVDF, ...
SERTO
Inner diameter: 3 mm - 12 mm
Temperature: -204 °C
Delivered length: 30 m
... Reduces the need for additional heating equipment and minimizes energy consumption. The TPL tube is a pre-insulated tube bundle with moderate tracing, the tracer tube being covered with insulation to ...
SOCLEMA
Inner diameter: 6 mm - 25 mm
Outer diameter: 13.1 mm - 36.1 mm
Pressure: 225, 320, 360, 400, 450 bar
... development and improvement has resulted in the creation of some of the most robust, high-performance hoses on the market. INFINITY, the new OEM focused hose family from Manuli Hydraulics, has been specifically developed ...
Inner diameter: 20 mm - 80 mm
Outer diameter: 33 mm - 94 mm
Pressure: 6 bar
... The properties of these hoses are confirmed by independent laboratory that: – certified the hoses for compliance with European standards EN ISO 1403, – issued the right to use the Polish Safety Mark that confirms the ...
Stomil Bydgoszcz
Inner diameter: 9.4 mm - 50 mm
Outer diameter: 21 mm - 62 mm
Pressure: 7 bar - 45 bar
... Aerre Inox produces clamp fittings in AISI 316L for flexible hoses in two main types: fittings crimped to the hose with a length pre-determined by the customer, reusable fittings applicable on the hose ...
AERRE INOX Srl
Inner diameter: 10, 12.3, 18.7, 24.8 mm
Outer diameter: 15, 17.5, 25.7, 32.8 mm
Pressure: 10, 12, 9 bar
... FITT PURE Tubo per il passaggio di acqua potabile certificato KTW-A e DVGW W270 e liquidi alimentari, conforme al Regolamento Europeo 10/2011 (simulanti A-B-C-D1). Certificato presso il laboratorio tedesco Hygiene-Institut, FITT Pure rispetta le ...
FITT Spa
... above or below ground and underwater. Unicoil™ hose bender makes quick work of just about any hose-routing problem. It requires no special tools or equipment. Simply slide the Unicoil™ hose bender over ...
Inner diameter: 1 mm - 3 mm
White Polyethylene Tubing available from 1/32 in. (1mm) OD to 1/8 in. (3mm) OD in various coil lengths ranging from 100 ft. (30m) to 500 ft. (152m).
Watts Water Technologies
Pressure: 500, 250 bar
Delivered length: 500, 1,000, 1,600, 2,500 mm
... Hose structure Depending on operating pressure and nominal diameter, high-pressure hoses consist of one or several layers of wire or textile mesh or spiral inlays. 1: Inner tube 2: Inlay 3: ...
Inner diameter: 2 mm - 12 mm
Outer diameter: 4 mm - 14 mm
Inner diameter: 6 mm - 250 mm
Pressure: 10 bar - 220 bar
Temperature: 0 °C - 550 °C
... Particular pressure resistance, high temperature resilience, well protected against outside influence. Hose material: Corrugated hose: 1.4404, 1.4541, 1.4571 Braid: 1.4301 Types of connection: Flange (hinged ...
STENFLEX Rudolf Stender GmbH
Inner diameter: 0.042 mm - 1.25 mm
Temperature: -18 °C - 105 °C
... Offering protection from flammability, high heat, abrasion, and chemicals. Alpha tubing has the size for your wire and cable routing needs. ...
Inner diameter: 12.2 mm - 25.4 mm
Outer diameter: 16.7 mm - 32.3 mm
Pressure: 6 Pa - 12 Pa
... The Anaflex click system consists of a highy quality flexible stainless steel AISI-316L hose with a nickel plated brass Anaflex Click fitting. The IP 69 system retains it’s liquid-tight rating up to +250° C. The Anaflex ...
Anamet Europe
Pressure: 20 bar
... This air hose, manufactured by Sata, has a length of 10 m and is equipped with quick coupling and nipple. It is a flexible and robust painting air hose that contains no silicone. Its electroconductiveness ...
Inner diameter: 20 mm - 90 mm
Pressure: 4, 7, 5 bar
... To be used with IBG FlexFit® fitting system With reinforcing twist Extra wall thickness ...
Inner diameter: 6 mm - 400 mm
Pressure: 5 bar - 120 bar
Temperature: 50 °C
... According BS 6501 / ISO 10380 Outer Braid Material : Stainless Steel , PP , Thermic protection braid Availability : Hose Assemblies ...
LUXECASTING INTERNATIONAL GROUP
Inner diameter: 6.4 mm - 25 mm
Outer diameter: 10 mm - 30 mm
Pressure: 80 bar - 224 bar
... core material: PTFE, Material of steel braiding: 1.4301 – AISI 304, Temperature: -70° C to 260° C. Hose assemblies can be supplied with a variety of hose connectors. ...
Schwer Fittings
... ® PEX hose---for sanitary product LIC ® Pex hose series have advantages as follows: high temperature resistance, high abrasion resistance, drinking grade, etc. Application : LIC ® hoses can be applied ...
Weihai Lianqiao New Material Science & Technology Co.,Ltd
Inner diameter: 6.5 mm - 11 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 85 °C
... Compressed air spiral hoses made of polyurethane are equipped with rigid coiling fittings and a buckling protection. Special Features: high flow rates at allowable working pressures up to 10 bar / 145 psi (at room temperature) ...
Inner diameter: 12 mm - 58.9 mm
Pressure: 2 bar - 5 bar
Temperature: 0 °C - 100 °C
... Purpose TO grade hose (available in both GP and AS) is a lightweight hose, used in applications where working pressures are low and where there is no need for the physical protection offered by an external braid. TO ...
AFLEX HOSE LTD.
Outer diameter: 32 mm - 500 mm
... the material Fusiolen PP-R/PP-RCT. These are insulated with PUR foam and enclosed with a casing pipe made of HDPE. The pre-insulated aquatherm energy pipe is particularly suitable for energy-efficient heat and cold ...
Inner diameter: 38 mm - 500 mm
Outer diameter: 46 mm - 510 mm
Pressure: 0.08 bar - 0.63 bar
... to ISO 8031 electrical and surface resistance Technology / Technical Information / REACH DESIGN patented PROTAPE® tape hose 1. spring steel wire integrated in wall 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®) 3. ...
NORRES Schlauchtechnik GmbH
Inner diameter: 0.8 mm - 25.4 mm
Delivered length: 15 m
Designed for high-purity applications, Longerpump Silicone Tubing's ultra-smooth inner bore can reduce the risk of particle entrapment and microscopic buildup during sensitive fluid transfer. In-house analysis of the inner surface of Sanitary Silicone ...
Baoding Longer Precision Pump
Inner diameter: 30 mm - 203 mm
Pressure: 10 bar - 28 bar
Temperature: -20 °C - 80 °C
... Hose for transfers, drainage, irrigation installations, sewage pumping, slurry and fertilizers, irrigation cannons, temporary installations (bypass), etc. Standard length: Available in 60m lengths. Other lengths on request (up to ...
KURIYAMA EUROPE
Inner diameter: 6 mm - 32 mm
Outer diameter: 15.4 mm - 44 mm
Pressure: 28 MPa - 56 MPa
... radius is 50% lower than DIN EN853 standard; high-pressure-pressure is 30%~40% higher than DIN EN853 standard; long life. Hose Fitting：It adopts high-quality carbon structural steel, the core material is 45# steel, the nut material ...
Luohe Letone Technology Co., Ltd.
Outer diameter: 0.75 in
Pressure: 20 bar
Temperature: 0 °C - 25 °C
... Pressure PN : 20 bars for flexible hose Ref.1371 et 1373 1 bar for discharge flexible with support Ref. 1372,1374 and 1375 Flexible hose 90° ends - Female / - Female ...
Inner diameter: 2 mm - 13 mm
Outer diameter: 4 mm - 16 mm
Temperature: -10 °C - 40 °C
... - Made of polyethylene (PE) - External calibration; for use with Eisele plug connectors - Free of plasticizer and halogen - Color: natural, black, red, blue, green, yellow, grey - Temperature range: -10 to +40 °C (14 to 104°F) ...
EISELE GmbH
Inner diameter: 40, 25 mm
... Semi-Rigid hose manufactured in accordance with NF S 61-115 - Great for industrial, construction or Wash Down - Standard in 50' & 100' lengths - Standard in 65' & 130' lengths - Hose is available in 1.0 , 1.25 and 1.5 ...
POK
... brake hose is subjected to rigorous testing, including a pressure test at 120 Bar. Only hoses that meet Corteco's standards—free from defects and capable of withstanding high pressure—are released. Look for the distinctive ...
Delivered length: 3, 6 m
... RED HOSE, 3 mt, HFO BLU HOSE, 3 mt, HFO RED HOSE, 6 mt, HFO BLU HOSE, 6 mt, HFO RED HOSE, 3 mt, R134a BLU HOSE, 3 mt, R134a RED HOSE, ...
Outer diameter: 0.75 in
Pressure: 105 bar
Delivered length: 0.6 m
... Description
R1AT
hose, 3/4" diameter, 0.6 m length, with male/female (M/F) end fittings. Intended for transfer of new oil. Rated working pressure: 105 bar (1523 psi). Model: VH9301.
Operating fluids
- New
Inner diameter: 6 mm - 25 mm
Outer diameter: 16.5 mm - 40.1 mm
Pressure: 0 bar - 420 bar
... Four spiral high pressure hoses according to EN 856 4SP standard for hydraulic systems with a rated pressure up to 380 bar. Universal high pressure hoses for high pressure hydraulic systems. A long service life makes ...
Inner diameter: 6.4 mm - 76.2 mm
Outer diameter: 10.5 mm - 88 mm
Pressure: 30 bar - 2,000 bar
... The Interpump high performance range features a wide collection of hoses that exceed International standards. Many of the hoses within the range are designed from specific customer requirements, giving them additional ...
IMM Hydraulics
Inner diameter: 100 mm - 1,650 mm
Temperature: -40 °C - 260 °C
Delivered length: 80 m - 1,500 m
... Pure woven PTFE; can be used in high temperature applications to 260°C / 500°F and with caustic or acid products.Compliant with: FDA 21 CFR 177.1550. Teflex Woven is made from pure woven PTFE and can be used in high temperature applications and with ...
BFM Global Ltd.
Inner diameter: 33, 25, 12, 11 mm
Outer diameter: 25, 19, 18, 16 mm
Pressure: 5, 6 bar
... *Powder coating
hose for painting system.
*transparent
hose, clearly showing work status of the flow.
* Super
Flexible design, easy installing. tough wall and elastic
hose.
* ...
Foshan Chanle Plastic Products Co.,Ltd.
Inner diameter: 3.3 mm - 24.7 mm
Outer diameter: 2 mm - 25 mm
Pressure: 40 bar - 260 bar
... -2008 standard certified workshops, to meet your needs. Customized or standard hydraulic hose Pneumatic hose PTFE hose High-temperature casing guard Guardian sleeve Complete Kits : control, marking, ...
Inner diameter: 9.6, 12.7 mm
Pressure: 0 bar - 28 bar
Temperature: -20 °C - 120 °C
... Working Temperature Range Dynamic Conditions : -5°C - +90°C Structure Medium pressure water hose with special mixture of powder rubber Kink resistant, smooth outside and abrasion resistant Available in red and blue color, please ...
Inner diameter: 40, 50 mm
Delivered length: 10 m
... Industrial hose reel ø 40mm to be fixed at the wall or steel structure directly in connection with steel pipes Ø50. With micro switch, and gate valve for automatic closing. With IP55 microswitch and built-in valve; ...
Starvac
the best suppliers