- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Hydraulic fitting
Hydraulic fittings
Diameter: 0.25 in - 2 in
Operating pressure: 10 bar
Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available
Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar
With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. ...
Diameter: 15, 20, 25, 32 mm
... original fittings. Fittings are made of high quality CW617N brass. The distinctive feature of the fittings is their custom design developed by SST and allowing the part to be fitted ...
Stahlmann
Diameter: 15 mm
Fitting for water connection with female thread (F) 15x1/2 EF Fitting Stahlmann ensures leak-free installation of Stahlmann corrugated stainless steel tube solutions. The product material is high ...
Stahlmann
Diameter: 15 mm
... fitting, simply insert the pipe and tighten the nut. There is no need to dismantle the fitting. This allows rapid installation without the risk of losing components. Male thread fitting ...
Stahlmann
Diameter: 3 mm - 15 mm
The Plastic Y Barbed Coupling, manufactured by Burkle, is ideal for applications such as pharmaceuticals, laboratory, industrial or manufacturing, water sampling and food processing. This provides a leak free and flow control fluid handling ...
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 16 mm - 63 mm
90° Tee with threaded female take off DeltaPress brass press fittings
Unidelta S.p.A.
Diameter: 16 mm - 110 mm
Operating pressure: 16 bar
... for generic applications. The quality of the materials used makes these fittings resistant to etching by numerous chemical substances and to UV-rays. The Unidelta Universal Fitting can be used to connect ...
Unidelta S.p.A.
Diameter: 26, 32, 40 mm
... produces a wide range of multi-profile press brass fittings (DeltaPress Water) suitable for the distribution of hot and cold water for domestic use and for heating and cooling systems. These fittings ...
Unidelta S.p.A.
Diameter: 40 mm - 225 mm
Operating pressure: 10 bar
... increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request. The fittings to be offered must be ...
Reinert-Ritz GmbH
Diameter: 250 mm - 630 mm
... increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request. The fittings to be offered must be ...
Reinert-Ritz GmbH
Diameter: 40 mm - 225 mm
... assurance system in accordance with DIN EN ISO 9001. For all fittings a certificate in accordance with DIN EN 10204 must be submitted by the manufacturer. Depending on the dimension, the fitting must ...
Reinert-Ritz GmbH
Diameter: 18, 20, 12, 16, 10 mm
Operating pressure: 1,200 bar
Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture the adaptor ...
AREMECA
Ideal for pressure gauges with outlet on the back This horizontal output is very useful for connecting pressure gauges with an output on the back.
AREMECA
Completely raparaible and disassemblable - Pressurized and depressurized connectable - Suitable for fluids and gases - Functional parts - high strength stainless steel - Mounting into individual contour - Flow optimized (real diameter) - ...
MECHANISM / NIPPLE, ND 6/10 UP TO 250 BAR These coupling elements can only be mechanically coupled and are used to transfer liquid and gaseous media. - Pressurized and depressurized connectable - Suitable for fluids and gases - ...
Diameter: 10 mm - 100 mm
... large range of these Fixings & Fittings for Adjustable Feet in stock ready for free or next day delivery, along with free samples which can be sent out if you'd like to test suitability before placing an order. These ...
Diameter: 0.25, 0.13 in
SWIVELS These have single or double outlet connections for use with standard flanged nozzles and filters to enable positioning of sprays.
Pipe connectors Suitable for realizing watertight, current leading connections between high current pipes. Hexagonal design is standard. But on request also in octagon or as groove nut design deliverable.
KROMA MEC SRL
KROMA MEC SRL
Diameter: 0.25 in - 4 in
Exd IIC Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: ...
KROMA MEC SRL
Operating pressure: 0 bar - 15 bar
C.Matic S.p.A.
Operating pressure: 25 bar
The CX is a “push on“ fitting made of AISI 316L, completely free of Orings since conceived for heavy duty applications involving high temperatures, aggressive fluids and where also FPM Oring would not be suitable.
C.Matic S.p.A.
Diameter: 4 mm - 14 mm
Operating pressure: 18 bar
... bottom of the fitting, the stainless steel collet grips onto it and the tube is held captive. It is then enough to press on the release ring to set the tube free from the fitting. Technopolymer Push-in ...
C.Matic S.p.A.
Diameter: 40 mm - 1,600 mm
... wide range of flange fittings for almost every application includes single flange fittings F, double flange fittings FF, double flange bends FFK 11–45° and Q, flanged duckfoot bends N, ...
Düker GmbH
... socket fittings with a gland, screw, TYTON® or Novo socket. Standard sockets are available upon request. You will find detailed technical information on our Dueker flange fittings in our fittings ...
Düker GmbH
Diameter: 6 mm - 60.3 mm
Connecting two pipes Aseptic flange connection according to DIN 11864-2 with buttweld ends for orbital welding with O-Ring. Material: 316L (1.4435), Fe < 0.5%. Sterilizing temperature: 150°C. With marking of batch number, material, ...
CONNECTORS
... biochemical industry. Connlock® is available in the dimensions DN 6 up to DN 65 with welding ends, Tri-Clamp ends or other fittings. They are also available in sizes ranging from 1/4" up to 3". The tubing connectors ...
CONNECTORS
Controlled media flow Non-Return Valve consiting of steel casing, spring, bearing bush and seals. Casing material: 1.4435, Fe < 0.5%. Spring material: 1.4435. Bearing bush material: 1.4435. Gasket material: EPDM as standard. Standard ...
CONNECTORS
Diameter: 11 mm
Operating pressure: 40 bar
Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...
MID - VARIACOR
Diameter: 16 mm
Operating pressure: 12 bar
The connection freely directional DynaVariacor helps you to fill the tank! Softens and makes handy the pipes semi-rigid of the petrol stations. Reduce the efforts, increases the manoeuvrability of the nozzle. Avoid the inopportune ...
MID - VARIACOR
Diameter: 25 mm - 65 mm
Operating pressure: 20, 40 bar
Make your fire interventions more comfortable , your progress on ground more efficient ... Increases pliability of fire hose, less effort due to hose rigidity, Makes easier using fire hose in hard to access area, Reduces step ...
MID - VARIACOR
Rubber Lined Pipes and Fittings Rubber Linings are a premium form of corrosion protection for some of the most severe chemical and abrasive environments. We have a wide range of rubber compounds in Natural and ...
High pressure Swivel Joint is a kind of pipe fitting used for high pressure pipe turning at different angles. In all the pipe fittings used in high-pressure pipeline system, the proportion is the largest, ...
... adapt a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple ...
The model 53 Socketweld fitting is designed to be socket welded directly to a 2” socket end. Possible configurations include welding to an industry standard “Sockolet” fitting, which is then welded to ...
Rohrback Cosasco Systems
The model 57 flanged fitting is designed to be mounted on a 2" ANSI Flange RF. Pressure rating is determined by flange size. When used with a Cosasco Retriever and Service Valve, the Access Fitting ...
Rohrback Cosasco Systems
The model 58 flanged fitting is designed to be mounted on a 2-1/16" API Flange RJ. Pressure rating is determined by flange size. When used with a Cosasco Retriever and Service Valve, the Access Fitting ...
Rohrback Cosasco Systems
Material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...
LMP-fluorcarbon
Material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...
LMP-fluorcarbon
Material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...
LMP-fluorcarbon
... convectors. Only one fitting is needed for most installations for adequate diversion for upfeed radiation. For most applications, a second fitting can be used if higher resistance is required Copper ...
Diameter: 5, 12, 50, 25, 9 mm
Operating pressure: 64 bar
Clean-break safety coupling with easy-to-clean ball face shape; connection almost free of air inclusion, low in leakage when disconnecting. Connectable under pressure, non-squirting, high flow rate, automatic lock. Materials: stainless ...
Walther Präzision
Diameter: 6 mm - 25 mm
Operating pressure: 16 bar
Clean-break couplings for water coolant. These types are used, among other things, for the connection of power modules to cooling circuits, primarily in rail engineering. Media: cooling fluids / water Materials: anodized aluminium ...
Walther Präzision
Diameter: 9 mm
Operating pressure: 16, 10 bar
Clean-break couplings in PVDF, applicable for cooling water or in the chemical and pharmaceutical industry Media: cooling fluids/water Materials: plastic Features / Options: safety unlocking device
Walther Präzision
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining