In-line pumps

Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi

... The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. The Epsilon Pump incorporates a PowerDrive™ transmission which eliminates the need for a double universal ...

Flow: 140 us gal/min
Head: 16.8 m

A superior commercial in-line pump based on the established Aurora Pump 320 Series has successfully met the severest demands of high temperature condensate service and boiler feed applications. The 326A in-line's rugged design is engineered specifically ...

Flow: 8 l/min - 18 l/min
Pressure: 150 bar
Power: 2.3 kW - 5.1 kW

... We produce inside our factory industrial in-line pump with 3 ceramic pistons. High performance, low maintenance and reliability are guaranteed by quality materials which ensure a long life. ...

Flow: 0 l/min - 700 l/min
Length: 325, 345, 470 mm
Height: 550, 570, 780 mm

FDA Compliant PTFE AODD Pump machined from a solid block of Virgin or anti-static PTFE, housed completely inside a stainless steel casing, providing safe transfer of your hazardous liquids.Self-priming, suction lifts (3.6m/12ft dry and 8m/26ft wet)Can ...

Flow: 400 m³/h
Pressure: 10, 16 bar
Head: 100 m

In-line pumps are devices designed to transport fluids along a specific line. These pumps typically offer high efficiency with low volume loss and are used in various industrial applications.

Flow: 0 l/min - 100 l/min
Pressure: 7 bar
Head: 70 m

The curves and performances refer to pumps with submerged suction line and resistance-free discharge side outlet with water at 20 ° C and vary depending on the material.

Flow: 1.5 l/min
Power: 24 kW
Length: 170 mm

... MDP15 In-line Filtration Pump is ideal product for supporting microbial filtration test at home and abroad. Microbial filtration system is used to do microbial test or other liquid demanded filtration, and MDP15 is main part of it. It is special ...

Flow: 0.24 l/min
Pressure: 3 bar
Power: 6 W

... KLP180 series diaphragm pumps are available in 24V and 12V voltages The product is small in size, high in pressure and stable in chemical properties, suitable for various working conditions Motors are optional, either cost-advantaged brushed motors ...

Flow: 20 l/min
Pressure: 12 bar
Fluid temperature: 10 °C - 60 °C

... PNEUMATIC PUMP FOR FRESH OIL REMOTE OIL EQUIPMENT TPN, NON-CALIBRATABLE This pneumatically-driven piston pump is used for the conveying of lubricants and similar fluids when the storage area and the dispensation area are in different places. The high-performance ...

Flow: 1.5 m³/h - 1,200 m³/h
Pressure: 1.6, 2.5 MPa
Fluid temperature: -20 °C - 120 °C

KYW series single-stage single-suction horizontal-type centrifugal pump are made by way of improving the design of KYL series vertical centrifugal pumps of this Co. with the performance parameters identical to those of KYL series and in line with the ...

Flow: 1 l/min
Input diameter: 4 mm
Weight: 2 kg

... The hand operated peristaltic pump is used for water sampling, or pumping 0 - 1000 ml/min. This pump has a suction head up to 9.5 metres. No cross contamination: exchangeable tubing Pumps air as well as water Monitoring well installation and water ...

Flow: 0 m³/h - 5,000 m³/h
Pressure: 0.2 bar
Power: 1.1 kW - 18.5 kW

... Axial pumps designed to pump large volumes of fluid with low back pressure. The pump is mostly used in wastewater treatment plants for the recirculation of sludge, but may also be used in e.g. drainage, and for recirculating in fish farming facilities. The ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

... The Horizontal Centrifugal Pumps of the CP range are highly reliable pumps with very high performance. They can work in very harsh conditions and constant over time. The sturdiness of its structure allows a long duration and a reduced maintenance. Characteristic The ...

Flow: 10 l/h
Head: 10 m
Power: 10 kW

... Item number: 9006301015 Application The EE1000 with three-stage float control has been developed especially for mini-split units, wall-mounted equipment and thin ceiling-mounted units. The pump operates electromagnetically and is very quiet, with ...

Flow: 4, 8, 16 m³/h
Pressure: 16, 21, 23 bar
Power: 0.37 kW - 18.5 kW

NF-VL / NF-VLS is a vertical multistage in-line pump series with all wet parts made of stainless steel. It is suitable for a variety of different applications involving various liquids from potable water to industrial effluent and covers a wide range ...

Flow: 0 m³/h - 500 m³/h
Pressure: 10, 16 bar
Head: 0 m - 95 m

... Application MVL pumps are used for pumping clean or almost clean liquids with viscosity similar to that of water. The MVL pumps can be used in: water supply systems water works systems water treatment systems air conditioning systems industrial ...

Flow: 1,080 m³/h
Pressure: 10 bar
Head: 125 m

... Vertical Inline Pump, closed coupled design, ideal for limited space. Materials : Cast Iron/ Ductile Iron/ Bronze/ SS304/ SS316 Flange : DIN 2501 (std)/ ANSI B16.5B (optional) Applications : Cold & Hot water Circulation General Industrial HVAC ...

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

... Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal level, with the same pipe dimensions at both ends. PUMPED ...

Flow: 0 m³/h - 35 m³/h
Pressure: 0 bar - 25 bar
Head: 0 m - 360 m

... End Suction, for the lowest NPSH required. Top discharge, center line mounted, for high stability in heavy duty, bare frame mounting, close couple on request. Field of application SC MAG-M pumps range meets the requirements on custom-built solutions ...

Flow: 550 m³/h
Pressure: 40 bar
Head: 280 m

... The SPN is a vertical in-line, single stage, single suction centrifugal pumps accordance to API 610 latest edition (OH5 type) and mechanical seal chamber in accordance with API 682 Overview The SPN vertical in-line pump was engineered in accordance ...

Pressure: 30 bar

... FOP fuel booster pump high light: FOP fuel booster pump is a new type of in-line meshing gear pump developed by our company according to the market demand. The main purpose is to provide a certain pressure and a certain amount of fuel for the burner. ...

Flow: 0 m³/h - 2,800 m³/h
Pressure: 10 bar - 30 bar
Head: 0 m - 420 m

... Design Features • Modern and efficient design with high performans • The wide product range to suıt every need. • Multi-stage, vertical or horizontal type, end-suction pump is the norm, inline, double suction split volute casing pumps can be ...

Flow: 2 m³/h - 850 m³/h
Pressure: 10 bar
Head: 2 m - 100 m

... DESIGN • Single stage in-line type centrifugal pumps are produced with standard motors and mechanical seal. • Pump flanges are designed in PN 16 pressure category compatible with DIN 2533. The suction and discharge flanges are identical and are on the ...

Flow: 11 m³/h - 11,500 m³/h
Head: 120 m

... PRODUCT FEATURES Hydraulic coverage from 15K-50K GPM High pressure solutions Industry-leading efficiencies across coverage range Options for low-NPSHa conditions and suction lift concerns Application-specific product options and material choices, including ...

Flow: 40 m³/h - 2,000 m³/h
Head: 50 m - 2,500 m
Fluid temperature: 0 °C - 260 °C

... Multistage Centrifugal Pump Fuel delivery pump Use It is mainly used for methanol cleaning equipment of the coal chemical industry, in which methanol is the raw material. Low-temperature pump for solution; Water injection pump used on off-shore ...