Industrial pumps

Flow: 0 us gal/min - 210 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 125'00"

... is not recommended.They operate with HT6 and HT7 power units or different source that can deliver flows to 5 GPM. The pumps are small in size, and can be bolted directly into a pipeline. ...

... Product feeling pump with pneumatic or electric functioning. The pump lets to transfer the product by the undervacuum homogenizer to the hopper of the filling machine. It can stop itself thanks to an ultranonic level ...

Pressure: 700 bar

... • Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • Safe to use ...

Pressure: 280 bar

... Gear pumps DIN are robust, economic and they possess 3 fixing holes. Their bidirectional direction of rotation allows compatibility with right or left power take-offs. Gear pumps DIN can provide a max continuous pressure ...

Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW

... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump ...

Flow: 130 l/min
Pressure: 0.3 bar

... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing rubbers On ...

Pressure: 4 bar - 8 bar

... Piston metering pneumatic pump with 1.2L and 4L transparent oil tank Piston metering pneumatic pump, air pressure 4-8bar, 0-0.04ml/stroke; ...

Flow: 0.01 l/min
Pressure: 20 MPa
Power: 24 W

... cartridges. ● Be careful not to let air enter the pump when replacing the cartridge. ● After greasing or after replacing the cartridge, be sure to open the air vent plug and vent the air inside the pump. ...

... Having a properly sized pump and reliable water supply for the evaporation system is critical to performance. Coldmist offers a full range of pumps and water supply options including: Small evaporator ...

Flow: 1,350 l/min - 2,200 l/min
Pressure: 60,000, 70,000, 80,000 Pa
Power: 2.2, 3.7 kW

... compared with conventional models) • Long Life Increased 10% with newly developed vane blade material. (compared with conventional models) Operation not allowed at ultimate vacuum.For model selection purposes only. Operable ...

Flow: 20 m³/h - 40 m³/h
Pressure: 0 MPa
Power: 4,000 W

... ◆ The water powder mixing pump is sufficiently blended with a high-speed rotating impeller to deliver the desired mixture. ◆ Uses: Suitable for milk powder, whey powder, paste powder, etc., etc., and liquids are mixed with liquids. The ...

Flow: 0.2 l/min
Pressure: 500 bar

... cintrolor with thermal couple 4-3 Pressure control=Pressure gauge/Pressure Transducer 4-4 CO2 flow comtrol：flow meter / display the gas CO2 flow rate ...

Flow: 160 l/min

Flow: 1.3 l/min - 450 l/min
Pressure: 35 bar - 120 bar

... Description PH pumps are robust, reliable piston grouting pumps, offering the possibility of computer piloting. PH pump range is very large and allows covering the complete grouting range, from fine ...

Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW

... for the pump NPF 1/10. It can be assembled with drainage nozzle and valve. All the pumps are equipped with a screw for additional mechanical mixing before sewage get into the pump. Up to date, our ...

... V Series High Pressure Pump System - Internationally Applicable 1. Siemens three-phase asynchronous motor and Rexroth constant pressure plunger pump are combined to serve as the power unit of the system, to control ...

Flow: 10 m³/h - 90 m³/h
Pressure: 300,000 Pa
Power: 4 kW - 22 kW

... GNG Series Centrifuge feed pump is a positive displacement pump, also called screw pump. The GNG positive displacement pump is an ideal pump for feeding to decanter centrifuge ...

... cps. The pumps are ruggedly constructed with polypropylene and polyethylene to perform in hostile conditions. Each EZI-action Drum Pump is supplied with the appropriate adapters for quick and easy installation. EZI-action ...

... High-reliability Water Pump Developed from the Engine System Requirements The material of mechanical seals having a large role to play in preventing cooling water leakage changed to silicon carbide (SiC) from alumina. Thereby heating ...

Flow: 5 l/s - 2,500 l/s
Input diameter: 100 mm - 700 mm

... centrifugal pumps of the PKR series are dry-installed single-stage wastewater pumps in the nominal width range from DN100 to DN700, which can be used in pumping systems for domestic, ...

Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C

... The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s no need for ...

Flow: 8 m³/h
Head: 25 m
Power: 1.1 kW

... Displacement : 35.8cc Lift Head : 25m Delivery Volume : 8m³/h SPECIFICATIONS Model : WP350 Engine Type : Honda GX35 Type, 4-stroke Displacement : 35.8cc Power Output : 1.1kw Carburetor : Diaphragm Lift Head : 25m Suction Head : 8m Delivery ...

Pressure: 50, 30 bar
Length: 171 mm
Width: 160 mm

... Medium pressure volumetric pneumatic pump comprising: double-acting pneumatic cylinder, pneumatic control assembly, volumetric pump, one-way release check valve, pressure gauge and line control pressure switch, operating ...

... of complete Airless Pumps as detailed below along with all the spare parts and consumables from its UAE and India factories that is fully supported around the world by our distribution and technical support network. Airless Pump ...