Industrial pumps

Flow: 32 l/min
Pressure: 1 bar - 8 bar

The vario top spray assembled by Sata, is a double-membrane pump, best suited for vehicle and industrial painting. This device makes use of solvent-borne paint systems of various viscosity and structures, ...

Flow: 12 m³/h - 60 m³/h
Head: 20 m
Power: 11 kW

Pressure: 18.5 bar - 34.3 bar
Power: 224 kW - 1,275 kW

Drilling pump is also called mud pump, which transport high pressure, high specific gravity, high sand concentration drilling fluid to bottom of hole. Drilling fluid is used to cool bit, wash out bottom ...

Pressure: 50 bar - 700 bar
Weight: 12 kg

With foot pedal operation, hydro-pneumatic system makes it easier to use rigid. • The foot pedal is operated in one movement and the system is activated and instead of manpower, it only serves to transfer oil to lifters. • Hydropneumati

Flow: 70, 21 l/min
Weight: 7.25 kg

*See notes below for doing leakchecks on diaphragm pumps in Method 5 sampling.* German-engineered and American-made diaphragm pump Lightweight and compact design Compatible with ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO 2858 standards Sold either with unfitted ...

Flow: 0 m³/h - 45 m³/h
Power: 0.12 kW - 7.5 kW

... drive centrifugal pumps series MG PP/PVDF are made of thermoplastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids. Thanks to the innovative mag drive ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

The Horizontal Centrifugal Pumps of the CP range are highly reliable pumps with very high performance. They can work in very harsh conditions and constant over time. The sturdiness of its structure allows ...

Flow: 7 l/h
Pressure: max 0.3 bar

... limitation • No shaft seals • Robust, industrial designs • Suitable for permanent operation • Tiny footprints Description The EDS03 is a plunger pump. Spring-loaded valves on the intake and output ...

Flow: 50 us gal/min - 750 us gal/min
Pressure: 3.4 bar - 15.4 bar

... Each pump set is tested in our factory, prior to dispatch, as per UL, FM and NFPA standards. These pumps are covered by a warranty of one-year subject to standard terms and conditions. NAFFCO also ...

Flow: 0.9 m³/h - 420 m³/h
Head: 0 m - 642 m

... technological processes, reduction of ground water level, watering systems, and other industrial and residential applications. Essential advantages of type G deep-well pumps the pump ...

Flow: 0 l/min - 25 l/min
Pressure: 0 Pa - 2,000,000 Pa

The Yamada air-powered pump is a reciprocating type pump that is driven by compressed air. The pump consists of an air motor section to drive the pump and a lower pump ...

Flow: 0.35, 0.4 l/min
Pressure: 150 mbar

Xavitech’s micro pumps is unique compared to regular diaphragm pumps. Xavitech micro pumps is more than just a pump, you might even ...

Pressure: 500 bar

431 stainless steel pump head Solid ceramic plungers Ej self adjusting seals Interchangeable plunger kits Hardened, alloy steel crankshaft with heavy duty roller main bearings SG iron erankcase with splash lubrication Forged ...

Flow: 4 m³/h
Head: 8 m
Power: 0.2 kW

... smartness of a huge pump, this minimal dissemination pump is revolutionary in vitality utilization, working expenses, low support and strength. The field of requisition include - swimming pool water ...

Flow: 30 us gal/min - 10,000 us gal/min
Pressure: 80 psi - 290 psi

Vertical Turbine pumps. Flow - 300 USGPM to 10,000 USGPM Head - 80 PSI to 290psi MOC - Cast Iron / Ductile Iron / SS304 or 316 / Super Duplex SS / Ni Aluminum Bronze Primer - Electric and Diesel Engine.

The grouting pump P101PE is suitable for compensation grouting through pipes fitted with valves, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing ...

Pressure: 700 bar

These pumps are two-stage hand pumps with an automatic switch from the 1st to the 2nd stage. A moderate effort on the handle is required to reach the maximum working ...

Monostage centrifugal pumps with closed impeller according to ISO 2858 and 5199 Max flow m³/h 500 Max pressure bar 15

Pressure: 8.5 bar

Pump at pressures up to 125 psi (8.5 bar) with the L/S High-Performance pump head and the included L/S 16HP high-pressure tubing Easy-to-use precision drives offer precise speed control and digital display ...

Flow: 5 l/min - 20 l/min

TPS-5——TPS-20 Voltage:120/260V Frequency:50/60Hz Power:5-18W AirFlow：5-20L/min

Flow: 19 ft³/min
Pressure: 80 psi

... gallon drum). Ensure that the drum pump is securely attached to the drum. Next, turn the knob of the Drum Storm counterclockwise. In less than 2 minutes, a high-powered vacuum fills up the drum. The ...

Flow: 826 l/min - 1,548 l/min
Pressure: 0 bar - 400 bar
Power: 0 kW - 700 kW

... reliability, the PF 770 has applications in industrial areas demanding continuous running such as: Steel industry (Hot rolling mill) Metallurgical industry (Forging, moulding and extrusion ...

... that produce syringe pumps recognized in the industry for their reliability and accuracy. Time-tested and proven in the field, TriContinent AccuPump syringe pumps provide a low-cost alternative ...

Flow: 1,080 m³/h
Head: 16 m
Power: 11 kW - 30 kW

Multi-channel impeller Max capacity: 1080 m³/h Head: 16 m Motor power: 11 - 30 kW Suction: 250 mm Discharge: 250 mm