IP I/O modules

Compact IO-Link master modules with eight multifunctional master ports are the most intelligent way to connect IO-Link devices. IP67 rated fieldbus modules are an important component in decentralized instal­lations. They replace complexly wired and expensive ...

... Product information
The FBB-2DI1DO.R.xxx modules provide two digital inputs and one relay output. They are designed for decentralized switching tasks and are suitable for driving motorized fire dampers with end-switch feedback (OPEN/CLOSED) ...

The Ethernet system with 16 digital I/O MSX-E1516 has 16 digital inputs/outputs with status LEDs, 24 V, and 1 digital 24 V trigger input. The inputs and outputs can be parameterised as paris of inputs our outputs and have an event logic. The system was ...

... TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general remote Ethernet IO monitoring and control. The device ...

The 905U-K and the 905U-K-IP are both capable of transferring sensors with analog, pulse, or discrete inputs, and powering a loop-powered analog device (24 Vdc, 50 mA), offering a simple-to-deploy and highly reliable solution. The ELPRO 905U-K provides ...

remote I/O boxes transmit various input and output signals between master devices such as PCs or PLCs and secondary devices including sensors and actuators. The IO-Link master type ADIO-ILM can exchange signals from secondary devices (IO-Link, standard ...

The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also be configured as frequency inputs or counters. ...

The 12 Inputs, 8 Analog and 1 Relay Outputs CAN I/O Module can extend machine control networks by adding I/O to the CAN bus. The controller features 1 Isolated CAN port for user-defined communications over the bus. It accepts up to 10 analog (0-5 V, 0-10 ...

... For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.5 mA at +24 V Input delay - typically 1 µs Type - +24 ...

... One-Cable Automation: LioN-Power Hybrid I/O Modules Streamline power and data transfer in one space-saving module with fewer connectors. Hybrid connectivity integrates Industrial Ethernet protocols and peripheral voltage into a single 8-pole cable. With ...

... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...

The SPC-SDIO-S0808SPK is an intelligent distributed IO module designed by SonnePower for industrial and vehicle control applications. With 8 flexible I/O channels, a CAN bus interface supporting CANopen, and built-in voice alarm functionality, this smart ...

The I/O systems are used in centralized or decentralized expansion for control and regulation tasks. Up to 63 slave modules can be connected to one master. The cabling is carried out quickly and safely via CAT cables. Master and slave modules can be physically ...

... EasySens® metering interface for wireless radio transmission of pulse signals for gas, water, electric and BTU meters with an S0 interface. • Application/type : I/O module • Purpose : Gateway, Measure values • Interface : EnOcean (868 MHz) • Configuration ...

TigoMaster 2TH is an industrial-grade IP67 IO-Link Wireless Master platform. It has two IO-Link Wireless tracks, supporting up to 16 IO-Link Wireless devices simultaneously. The TigoMaster 2TH includes interfaces to a variety of Industrial Ethernet protocols, ...

Interra Ethernet I/O module is a versatile device that allows a variety of configurations and provides cost-efficient automation for smart home applications. The Ethernet module is intended to cover several automation requirements in a smart building ...

... GF 30 % Polyamid 8(12)~32 VDC -40°C … +80°C 35 Pin Tyco Seal USB2CAN Interface for Configuring Device Up to 26 Digital Inputs Up to 8 Frequency Inputs Up to 26 Analog Inputs Up to 10 Current Inputs Up to 6 Resistive/Temperature Sensor Inputs Up ...

The TRS67 modules are EtherCAT slave devices, available in plastic or metal, waterproof and dustproof, compliant with the international standard IEC 60529. Depending on the model, each connector contains digital inputs or outputs and/or a connection to ...

... 1 stop-function / current 5 A / short-circuit protected »Listen before talk«-technology mit automatic frequency management for higher operational safety or frequency hopping for USA and Canada Several systems can be operated at the same ...

... As a communication interface independent of the field bus, the sensors, actuators and I/O supporting the IO-Link protocol are IO-Link slave devices, which greatly improves the reliability of the devices. M12 series classification: - 16-channel digital ...

With an IP65 rating and up to 2A through each of the 18 outputs, the EtherCAT® I/O Box is suitable for almost all applications. Inbuilt diagnostics detect broken cables, short circuits and overcurrent’s quickly with onboard diagnostic functions and features. ...

... M12 interface、multi-protocol bus module、16DI/DO configurable、PNP、007E31 > Integrated four Ethernet interfaces: PROFINET, Ethernet/IP, CC-Link IEF Basic、Modbus TCP > 8 ports 16 signals > Input/output configurable > Protection level: IP67 (when installed ...

... Self-configuring Detailed channel-specific diagnostics Individually readable state of the outputs Inexpensive digital outputs ASi-5 self-configuring I/O module, in IP67, with 8 x M12 sockets, up to 16 digital inputs, up to 16 digital outputs, Y/mixed ...

... The DAXIO3410E contains a versatile set of I/O channels and a Ethernet interface with different communcation stacks: 32 bit controller 4 digital in/out channels 16 digital input channels (6 digital inputs optionally used as code inputs) analog inputs ...

The IA-3131-E is an Industrial 10/100 Base-T Ethernet Relay board that includes a TCP/IP port and 32 Relays, and can be easily controlled by DOT.net Software Drivers or by Virtual COM ports. The IA-3131-E IP Relay Controller includes an onboard server ...