Iron valves

DN: 65 mm - 300 mm
Pressure: 25 bar
Temperature: 0 °C - 110 °C

Variable Orifice Ductile Iron Double Regulating Valve Additional information Material - Ductile Iron Typology - Static balancing Connection - Flanged Variable orifice ...

DN: 200 mm - 800 mm
Pressure: 10 bar
Temperature: 80 °C

Shock pressure resistant and flameproof intermediate flange slide gate with low overall height. MATERIAL HOUSING :Cast ironMATERIAL SLIDING PLATE :Stainless steelSEALING :Circumferential packing aramid, o-ring viton Adjustable packing ...

DN: 15 mm - 150 mm
Pressure: 20 bar
Temperature: 220 °C

The GP-2000 is a high-performance, externally piloted reducing valve for steam service with large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, ...

DN: 150 mm
Pressure: 10 bar - 16 bar
Temperature: -20 °C - 90 °C

Butterfly valve DN 150 PN10-PN16 Lug type GGG40 with notch lever with grey sleeve EPDM DVGW drinking water, WRAS, ACS, W270 sleeves: - EPDM DVGW drinking water, WRAS, ACS, W270 body material: - SG iron ...

DN: 0.25 in - 12 in

... Bellow Seals Swing Check – Wafer Check Valves, Dual Disc, Tilting Disc Piston Check – Ball Check & Wafer Check Valves Through Conduit Gate Valves – Cast Steel Pressure ...

DN: 15 mm - 80 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 350 °C

Three-way valves for heat transfer oil systems The control valves of the V5066 series by A. Hock are extremely versatile and of top quality. The three-way valves are available in diverting ...

DN: 2, 1, 3 in
Pressure: 5,000, 3,000, 2,000, 1,500, 1,000 psi
Temperature: -28 °C - 120 °C

Oilfield floating bail valve is a two-piece design with a ductile iron body or Carbon Steel, include Fig DIBV, CSBV, ABBV, A2BV, EUECBV . This economical valves includes many of the premium ...

DN: 50 mm - 600 mm
Pressure: 1 MPa

Motorized High Vacuum Butterfly Valve used for Chip Production Industry Electric Butterfly Valve Application DCL electric motorized high vacuum butterfly valves are widely used ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 180 °C

Flapcon® BA302 Series 3-piece ball valves are manufactured from cast&ductile iron, steel and stainless steel casting varieties. Thanks to full-bore construction, they provide high capacity permeability. ...

DN: 100 mm - 2,000 mm
Pressure: 10 bar - 160 bar
Temperature: 70 °C

ERHARD Needle valve ERHARD Needle valve is the right valve to use whenever pressure heads or flow rates need to be safely and reliably reduced and controlled. They are used for two main ...

DN: 80 mm - 600 mm
Pressure: 20 bar

... requiring high pressure performance and reliability. The HB series knife gate valve consists of a two-piece ductile iron body and wafer style bi-directional knife gate valve, available ...

DN: 2 in - 12 in
Pressure: 250 psi

... operation. Ductile Iron Construction The ductile iron body, bonnet and wedge provide strength and a pressure rating that meets or exceeds the requirements of AWWA C515. The tensile strength of ductile ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 85 °C

The valves in series 20E900 are soft seated gate valves, made of ductile iron, manufactured in accordance with severe product norms and relevant norms, and in conformity to EN ISO 9001; ...

DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C

Electric Actuated Globe Control Valve Body: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Bonnet: Cast Steel, Cast ...

Pressure: 28 bar

The main functions of the Shut-Off Valve are to start or stop fluid within the particular circuit it is installed. Applications The Henry Technologies’ range of Globe and Angle Shut-Off Valves is ...

DN: 65, 80, 100, 150 mm
Pressure: 20 psi - 250 psi

... compact valve to minimize installation labor. • Ductile iron construction to ensure a lightweight valve to minimize shipping cost. • A variety of inlet and outlet connections. • ...

Through Conduit Knife Gate Valve AFC knife gate valves, are designed for convenient, unrestrictive control over pipeline flow. Specifically made for industrial use, size range from DN50-DN1800 in one ...

DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C

... temperature: up to +70°C drilling of flanges: PN10/16, starting from DN200 - PN10, PN16 body and bonnet: ductile iron EN-GJS-500-7 wedge: ductile iron EN-GJS-500-7, EPDM coating stem: stainless steel ...

DN: 3 in - 24 in

A new cast stainless steel AIS-compliant knife gate valve is now available from DeZURIK. The AIS-compliant knife gate valve is based on DeZURIK’s successful KGC-BD design which is a cast ...