Lead-acid battery chargers

Voltage: 24 V - 80 V
Amperage: 30 A - 300 A

... The trak | charger HF premium is suitable for all applications involving industrial trucks, storage technology devices, driverless transport systems and electric cars. Take advantage of the maximum availability offered ...

Voltage: 380 V
Amperage: 80 A - 1,800 A

... caused by the switch. With devices of over-load protection and over-heating protection. Suitable for 12V/24V acid- lead storage batteries. Desianed and produced by means of the most practical and reliable ...

Voltage: 14.4 V
Amperage: 15 A

... temperature as well as connection for measuring battery temperature. The ENA Chargers has a charging mode button to toggle between specialized charging characteristics for lead- acid, ...

Voltage: 12 V - 24 V
Amperage: 65 A

... -up and redundancy are designed with 54mm width with 12V / 24VDC (MD) rating. They are used for batteries up to 65Ah and provide protection against battery reverse polarity, deep discharge, shortcircuit / overload. The ...

Voltage: 12, 24, 48 V
Amperage: 36.7, 18.4, 9.19 A

... Guaranteed power during unexpected AC cuts AC/DC UPS, AC/DC Battery chargers 500W-DC-UPS The EDS-500 is a 500W battery charger that allows feeding DC loads through the charger´s ...

Voltage: 12 V
Amperage: 15 A

... 15 amp battery charger that has a model code of EC-1215UL. This battery charger operates with a range of 12 volts that makes it a high efficiency device. This charger ...

Voltage: 12, 6 V

... Automatic battery chargers with program for charge conservation (pulse recharge). Suitable for charging lead batteries:WET serviceable and maintenance free, AGM, GEL, Start & Stop. Multi ...

Voltage: 7 V
Amperage: 0.3 A

... for charging any 6V sealed lead acid battery with a capacity of 1.3Ah-6Ah. The 6V .3Ah SLA charger can be used for charging any 6V sealed lead acid ...

Voltage: 6 V
Amperage: 800 mA

... Product information "PP8 Charger Lead Acid" Characteristics PP 8 Lead Acid: Universal Input 100 to 240 V AC, constant voltage, current limited, exchangeable secondary ...

Voltage: 12 V

... The SE Success SUPER-LITE Lead Acid Battery Chargers are developed to deliver 9 pieces battery with a range of 12V or a 18 pieces battery with a range ...

Voltage: 100 V - 370 V
Amperage: 3, 6 A

... design. Our Lead- Acid Battery Chargers are used by electric vehicle and medical facilities appliances etc. These Lead- Acid Battery ...

Voltage: 12 V - 24 V
Amperage: 5 A - 10 A

... external switch selection (open lead & sealed lead / gel). Security delay of 12 hrs for the boost and absorption phase, in order to avoid battery overheating. Enables things to be permanently plugged ...

Voltage: 24 V - 480 V
Amperage: 50 A - 2,000 A

... Operates with Nickel-cadmium (vented/ gas recombination) and Lead acid batteries (vented/ gas recombination). • Advanced Battery Management. • Flexible in-built features. • Operation ...

Voltage: 12 V
Amperage: 7 A - 10 A

... current and verify battery activity or failure; - full charge signalling and low battery; - alligator clips (clamp) for battery poles and fast-on All lead battery ...

Voltage: 5 V - 36 V
Amperage: 3, 2, 0.85, 1.5, 1 A

... Rated Power: 25W Input: 100-240V AC, 50 / 60Hz Standby Power: ≤0.1W Efciency Level: MEPS Protection: Short Circuit, OCP, OVP Univeral AC input/ Full range Energy efficiency level VI Leakage Current: < 0.25mA Extremely low leakage current Protection:Over ...

Voltage: 90 V - 290 V

... circuit protection, Reverse connection protection, High temperature protection, Wide range operation voltage, Suitable for Lead Acid battery ...

Voltage: 24, 48, 110, 125 V
Amperage: 4 A - 40 A

... Manages nickel-cadmium and sealed lead- acid batteries - Wide range of power ratings from 500 to 1,000 W and voltages from 24 to 125 V - Compact dimensions for easy integration Strength - Magneto-thermal ...

Voltage: 12, 13.8, 14.4 V
Amperage: 2 A

... traditional, from lead- acid to the AGM, from 1.2 Ah to 100 Ah SAFE. YOU DON’T NEED TO DISCONNECT THE CAR BATTERY NOR REMOVE THE BATTERY CAPS. YOU CAN ALWAYS LEAVE IT CONNECTED. No loss ...

Voltage: 48 V
Amperage: 120 A

... the Battery Management System (BMS) incorporated in the LIONIC® energy system. With high-efficiency chargers, the electrical energy consumed when charging LIONIC® energy systems is approx. 30 % less ...

Voltage: 200 V - 420 V
Amperage: 10 A - 30 A

... Feature Size:260mm x 250mm x126mm Input : 85-265Vac Output : 200-420Vdc Fan cooling High/low voltage circuit protection design LED indicator Multi protection circuit design Introduction Application : installing inside car or independent using ...

Voltage: 48, 24, 12 V
Amperage: 30 A - 100 A

... ENAGs new generation of CDS4 battery chargers (24Vdc) continues to evolve with the introduction of a high power range. Enhanced functionalities, more efficient battery charging with the option of voltage ...

Voltage: 12, 24, 48 V
Amperage: 17, 35, 60 A

... An intelligent 1000W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging characteristics. Up top 2 battery banks can ...

Voltage: 48, 24, 60 V
Amperage: 270, 10 A

... . The absence of mechanical charging contacts makes it easy to integrate charging the battery into existing processes and thus an intermediate charge of the batteries is possible. This saves time and eliminates the potential ...

Voltage: 24 V - 220 V
Amperage: 2.5 A - 360 A

... structured operator display for easy operation and intuitive communication Battery circuit monitoring every 24 hours Trickle charge and heavy charge for lead- acid and nickel-cadmium batteries ...

Voltage: 230 V
Amperage: 5 A

... Charging Lead- Acid batteries in three controlled stages for best performance SMPS technology for maximum efficiency and reliablity with minimum heat dissipation. EBC 1205M can deliver continuous ...