Flow: 20 m³/h - 350 m³/h
Power: 5.5 kW - 75 kW
... delivery capacity and lift for desander pump, desilter, mud cleaner, mud mixing device, mud pump supplement, etc.. Sizes range from 3 x 2 to 8 x 6, and customers can choose different models according ...
Flow: 110 m³/h
Pressure: 12 bar - 20 bar
Fluid temperature: -40 °C - 150 °C
... is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values.It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be used ...
Flow: 2 m³/h - 16 m³/h
Pressure: 4 bar
Power: 0.55 kW - 4 kW
... As one of most compact progressing cavity pumps available today, the PCM EcoMoineau™C floating stator pump can handle a wide range of fluids with varying viscosities and solids. It provides good suction ...
Flow: 5 m³/h - 12 m³/h
Pressure: 6 bar
Power: 4 kW
... Technical Data / Performance Data • suction lift max. 8 m • solids grain size max. 16 mm • suction connection Storz C 2“ standard coupling DIN 14307, alternatively, 2“ AG, flange DN50 PN16 • pressure connection Storz C 2“ standard ...
GERTEC
Flow: 40, 60 l/min
Head: 38, 58 m
Power: 0.37, 0.6 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS OF USE - ...
Speroni
Flow: 0 l/min - 40 l/min
Pressure: 8 bar
Head: 0 m - 25 m
... technology Reversible (the flow direction of rotation) Start-up with empty pipes Very fast priming phase Extended suction lift capability (up to -5m) 3 motor executions according to the liquid specific gravity: "N" standard - 1,1 ...
Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 519 psi
... multi-stage, turbine pumps for firefighting applications. UL listed and FM approved pump for suction lift conditions. Available with diesel or electric drive. Overview Ruhrpumpen's vertical ...
Flow: 6.3 m³/h - 400 m³/h
Head: 5 m - 125 m
... . Head of the chosen water pump should be according to the practical needed delivery lift,and the pipeline loss of the water pump should be considered. When choosing the water pump,the ...
Hebei Hengsheng Pumps Co., Ltd.
Flow: 0 us gal/min - 123 us gal/min
Length: 471 mm
Width: 310.29 mm
... excellent flow rates. The Versamatic 1 ½" pump is the performance leader in flow rate at 123 gpm (465 lpm), displacement per cycle and dry suction lift. Additionally, this pump: Makes maintenance ...
Flow: 0 m³/h - 44 m³/h
Head: 0 m - 24 m
Power: 1.5 kW - 4 kW
... The GR series of belt driven flexible impeller pump is designed for handling extremely viscous fluids up to 50000cp. The belt drive allows the pump to be ran at speeds down to 235RPM, running the pump ...
North Ridge Pumps Ltd
Flow: 200 m³/h - 1,740 m³/h
Head: 26 m - 1,700 m
Power: 55 kW - 4,000 kW
... series isolation submersible pump. The pump has single suction and double suction type. The single-suction pump structure is the first in the world and has been awarded national patent. YQ, ZQ and ...
Flow: 0 l/min - 620 l/min
Head: 27 m
Power: 3.5, 3.1 kW
... Vibration Comfortable in use after reducing engine vibration. (3) Guaranteed performance Koshin guarantees 8 m suction lift and specifications. ...
KOSHIN LTD
Flow: 9 m³/h - 87 m³/h
Pressure: 20, 18, 16 bar
Fluid temperature: -20 °C - 140 °C
... is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values. It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be ...
INOXPA
Flow: 30 m³/h - 500 m³/h
Power: 30 kW - 2,200 kW
Fluid temperature: 15 °C - 120 °C
... bottom suction type of pump. It can pump all the water on ground. It uses submersible three-phase asynchronous motor. It takes little space, easy to install and use, reliable, and has a long service life. QJT Mine ...
Shanghai Weihu Pump Industry
Flow: 3.2, 3.7, 4.3 m³/h
Power: 0.37, 0.55, 0.75 kW
... Waiter Pumps Suction lift up to 9m with foot valve. - Maximum operating pressure: 8 bar. - Maximum ambient temperature: +40℃ . - Liquid temperature up to +60℃. - Maximum altitude +1000m. Introduction Selfpriming ...
FUDING BROTHERS POWER COMPANY
... Bore xStroke(mm): - 68X52 Displacement(cc): - 196 Compression Ratio: - 8:5:1 Max Power Output(HP/RPM): - 6.5/3600 Lift H.max(m): - 65 Out/Inlet size(mm): - 40 Displacement(m³/h): - 12 Suction(m): - 7 Fuel tank capacity(L): ...
Flow: 0 us gal/min - 240 us gal/min
Pressure: 0 psi - 500 psi
Power: 0 kW - 15 kW
... Varley Gear Pumps Double helical gear pumps with smooth, non-pulsating flow, providing high reliability and low maintenance resulting in a lower lifetime cost of ownership. Varley Gear Pumps are offered ...
... The OSIP Deep-Wells DW-JET series is a self- primming electro- pump. This pump aims to remove the water from wells with a minimum diameter of 4, approximately 11cm by lifting. It is fitted with its maximum suction depth ...
Flow: 0 us gal/min - 8,000 us gal/min
Head: 0 m - 256 m
... Hybrid Pumps Cornell Pump hybrid pumps are able to handle dirty water and viscous slurries. They can handle small solids and high operating pressures for up to 800′ of head. Hybrid ...
Flow: 60 l/min - 80 l/min
Head: 10 m - 20 m
Power: 0.75, 0.55 kW
... Anti-Explosion Transfer Pump Kit with Stand (JYB-80F) Product introduction: This explosion-proof fuel transfer pump is suitable for use with Gasoline,Diesel,Kerosene and Methanol. It is aimed for convenient operation ...
Yongjia Jiangbei Yiben Machinery Company
Flow: 4 m³/h
Pressure: 0.4, 0.7 MPa
Head: 15 m
... Used for pumping water, oil, sewage, sludge, and sand from underground wells, trenches, deep holes, ship holds, and storage tanks. Features Used for pumping water, oil, sewage, sludge, and sand from underground wells, trenches, deep holes, ship ...
Flow: 30 m³/h
Pressure: 0.4 MPa - 0.7 MPa
Height: 330 mm
... Used for pumping water, oil, sewage, sludge, and sand from underground wells, trenches, deep holes, ship holds, and storage tanks. Features Used for pumping water, oil, sewage, sludge, and sand from underground wells, trenches, deep holes, ship holds, ...
Flow: 60 m³/h
Pressure: 0.4 MPa - 0.7 MPa
Height: 350 mm
... Used for pumping water, oil, sewage, sludge, and sand from underground wells, trenches, deep holes, ship holds, and storage tanks. Features Used for pumping water, oil, sewage, sludge, and sand from underground wells, trenches, deep holes, ship holds, ...
Flow: 800 m³/h
Fluid temperature: 80 °C
... Self-priming horizontal centrifugal pumps are an intelligent alternative to vertical pumps and submersible pumps. Having an appropriately modified screw, they are able to generate vacuum ...
the best suppliers