Operating pressure: 35 bar
Temperature: 350 °C
A profile of plates certainly suitable for your fluids Advantages of Heatex® Compact Cubic : short length of plates : very easy to clean Free gap channels 4 inspection doors : both circuits are accessible Exchange area up to 700 ...
Kapp
Operating pressure: 16, 30, 25 bar
Temperature: -195 °C - 230 °C
Brazed plate heat exchangers are the perfect solution that allows for maintaining high thermal performance at low operating costs. Brazed plate heat exchangers are ...
HEXONIC CZ s.r.o.
Operating pressure: 20, 16 bar
Temperature: -195 °C - 200 °C
Exchangers made entirely of stainless materials, intended for systems with high sanitary standards. Exchangers made entirely of stainless materials, intended for systems with high sanitary standards. LUNATM ...
HEXONIC CZ s.r.o.
Operating pressure: 32, 25, 45 bar
Temperature: 150 °C
brazed plate heat exchangers are intended for cooling or heating systems to work as evaporators or cooling medium condensers. R brazed plate heat exchangers are intended ...
HEXONIC CZ s.r.o.
Power: 0.1 kW - 10,000 kW
Operating pressure: 40 bar
Temperature: 340 °C
... different kinds of heat exchangers there are. PIROBLOC designs and manufactures heat exchangers whose fluid is primary thermal fluid. The heat ...
Operating pressure: 375, 337, 137 bar
Temperature: 593, 537, 148 °C
Sentry DTC (dual tube coil) tube-in-tube heat exchangers are spirally wound, full counter flow heat exchangers well suited for a variety of applications where low flow ...
Power: 0.1 kW - 10,000 kW
Operating pressure: 0 bar - 1,000 bar
Temperature: -100 °C - 400 °C
The design of the mixer / heat exchanger equates to a combination of a static mixer and a multitube heat exchanger in which a highly viscous product on the shell side ...
Power: 0.1 kW - 10,000 kW
Operating pressure: 0 bar - 200 bar
Temperature: -100 °C - 400 °C
... These elements increase the heat transfer from the product to the tube wall, so that smaller sizes can be realised than if the multitube heat exchanger has no mixing elements. Multitube ...
Power: 0 kW - 1,000 kW
Operating pressure: 0 bar - 100 bar
Temperature: -100 °C - 400 °C
... between the primary and secondary media, with practically total dranage on the product side. Fluitec sterile shell and tube heat exchangers are therefore ideally suited to CIP/SIP plants. A special ...
Design feature: The standardised and pre-engineered counterpart of the BCF line, but made of stainless steel 1.4571(V4A). Application: Ideally suited for the chemical, refining, pharmaceutical, and process industries where aggressive ...
Funke
... specialised in the development and manufacture of heat exchangers with up to 2000 m2 heat exchanger surface for all current industrial applications and designs. In ...
Funke
Design feature: Safety heat exchanger. Both media separated by a double tube bundle Special safety avoiding intermixing of media Immediate leak indication by special sealing liquid Leakage ...
Funke
Power: 15 kW
Operating pressure: 12 bar
Temperature: 0 °C - 120 °C
... produce an extremely reliable product. The EMMEGI heat exchangers have a water system of 1,2 or 4 circuits an they can be supplied with thermostatic valves which greatly assist ...
Emmegi Heat Exchangers
... produce graphite heat exchangers for many corrosive applications. Our product lines – the largest of its kind in the industry – include the full range from shell & tube to block or plate heat ...
SGL GROUP
Power: 5,000 kW
Operating pressure: 25 bar
... Hybrid Heat Exchanger produced by Universal Hydraulik combines the advantages of Shell & Tube- and Plate Heat Exchangers. A larger cooling surface through the hybrid-design ...
Universal Hydraulik GmbH
Power: 0 kW - 300 kW
Operating pressure: 30, 43 bar
Temperature: -160 °C - 200 °C
... E plate heat exchanger is designed for both cooling and heating applications. It is commonly used to cool hydraulic fluid and lubricating oil and can be used for water, air, steam and ...
ASA technology Produktions- und Vertriebs GmbH
Power: 0 kW - 370 kW
Operating pressure: 10, 20 bar
Temperature: 80 °C - 150 °C
... range of shell and tube design heat exchangers. The main benefits of this design are the versatility of applications more independent of the used fluid quality and good maintenance ability ...
ASA technology Produktions- und Vertriebs GmbH
... heat exchanger series as well as the versatile ST shell tube heat exchanger series. Compact water-cooled plate heat exchangers in combination with ...
ASA technology Produktions- und Vertriebs GmbH
Tailor-made: Bespoke solutions are in our DNA. Since 1987 we have been developing and producing our gasketed heat exchangers exclusively in Italy, without exception. It is our identity and our way of ...
Power: 23 kW - 171 kW
Operating pressure: 1 bar - 2.7 bar
Temperature: 60 °C
... increase the heat dissipation area. Make the cooling medium fully heat. Compared with the traditional straight pipe heat dissipation performance, the heat dissipation ...
Power: 13 kW - 172 kW
Operating pressure: 33, 20 bar
Temperature: 100, 60 °C
... cooling water of our standard oil cooler is usually tap water Groundwater, industrial water and comply with the water quality standards in the table below, do not use ...
SHELL TUBE HEAT EXCHANGER IN TUBE HEAT EXCHANGERS, HEAT TRANSFER SURFACE CONSISTS OF TUBES. IT IS THE MOST WIDELY USED HEAT EXCHANGER ...
Power: 20,000,000 W
Operating pressure: 40 bar
Temperature: 300 °C
Tubular heat exchangers transfer the thermal energy of a fluid to another one. Therefore, their name is tubular heat exchanger. The fluids involved are ...
... or cooled in DTS-heat exchangers: I. heating and cooling fluids steam or pure steam circulating water coolant fluids II. process fluids ultra pure water water ...
Temperature: 0 °C - 40 °C
The combined heat exchangers combine the advantages of tubular heat exchangers and electrical heating. If the heating fluid is not yet available (e.g. ...
Power: 2.2, 3, 4, 3.7 kW
Operating pressure: 20, 25 bar
Temperature: -10 °C - 150 °C
... surface heat exchanger with an interchangeable tube that can be customized depending on the product, particle size, hygienic requirements, space constraints and the heating/cooling medium. The tube is ...
Operating pressure: 10, 35 bar
Temperature: -30 °C - 190 °C
... products that require thermal processing. The Consistator® MD consists of a tube mounted in an insulated and completely sealed multi-purpose jacket of stainless steel, which can operate with a choice of media including ...
Power: 245 kW
Operating pressure: 1.5 bar - 6 bar
Temperature: 90 °C
... main hot water unit consists of a plate heat exchanger, a water circulation pump, a pressure expansion tank, and steam regulating valves. The unit can be expanded with one to three water ...
... the necessary competencies to deal with a wide variety of heat exchanger related issues, from rapid thermal analysis and selection. To solve advanced thermal problems with your heat ...
The gasketed plate heat exchangers of the series AV and AX are constituted by a complete and flexible range of plates of various sizes to best resolve each individual problem of heat ...
TERMOLEADER
The gasketed plate heat exchangers of the series AV and AX are constituted by a complete and flexible range of plates of various sizes to best resolve each individual problem of heat ...
TERMOLEADER
The gasketed plate heat exchangers of the series AV and AX are constituted by a complete and flexible range of plates of various sizes to best resolve each individual problem of heat ...
TERMOLEADER
Operating pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C
... compact and relatively low weight. Pfaudler GlasSiC is the most advanced solution in the SCO heat exchanger series - a high efficiency, glass-lined heat exchanger with ...
The triple tube or annular space heat exchanger is used for heat transfer applications with viscous fluids. It consists of three concentric tubes. Product flows through the annulus between ...
HRS Heat Exchangers
The DTA type heat exchanger is a double tube heat exchanger (tube within a tube), similar to the DTI type heat exchanger,but with a ...
HRS Heat Exchangers
The DTR heat exchanger is a tube in tube heat exchanger specially designed for sludge and waste water applications. The tube in tube concentric geometry ...
HRS Heat Exchangers
• Heat exchanger made of plastic • Heat exchanger for passage of hot water or steam • To be installed on tank’s wall or bottom • Available in different size (on request) • ...
Operating pressure: 31 bar
Temperature: 200 °C
Brazed plate heat exchanger. Application: refrigeration systems, heat pumps, substations and so on. Design pressure - 31 bar at +200°С. Chevron angle: H Max. No of plates: 50 Port ...
EkoAir Ltd
Operating pressure: 31 bar
Temperature: 200 °C
Brazed plate heat exchanger. Application: refrigeration systems, heat pumps, substations and so on. Design pressure - 31 bar at +200°С. Chevron angle: H Max. No of plates: 60 Port ...
EkoAir Ltd
Operating pressure: 31 bar
Temperature: 200 °C
Brazed plate heat exchanger. Application: refrigeration systems, heat pumps, substations and so on. Design pressure - 31 bar at +200°С. Chevron angle: H Max. No of plates: 80 Port ...
EkoAir Ltd
Temperature: 5 °F
... Surfaces Plate and frame type heat exchangers offer more heat transfer in less space. The Conair Tower Isolation PF Series perform with one third to one fifth the surface area of conventional ...
Operating pressure: 5 bar - 85 bar
Temperature: -50 °C - 225 °C
... footprint make Alfa Laval’s CB line of brazed plate heat exchangers ideal for demanding installations where space is limited. That’s why they have become a common replacement for other types of heat ...
Alfa Laval
... materials The Coperion heat exchanger is a proven technology. In many bulk materials handling processes it is necessary to thermally treat (cool or heat) powders, pellets and granules. The ...
Operating pressure: 3 bar - 6 bar
... side) up to +6 barg Suitable for pharmaceutical products The QVF SUPRA shell and tube heat exchangers are available with nominal diameters of DN80 to DN300 heat exchange surfaces ...
De Dietrich
Please specify:
Help us improve:
remaining