Metal check valves

Pressure: 350 bar
Temperature: -30 °C - 120 °C
Flow rate: 610 l/min

... . · Reverse flow through the valve from port 2 to port 1 is not possible under any condition. Operation This valve is a spring biased closed, pilot-to-close check cartridge that ...

DN: 32 mm - 600 mm
Pressure: 10, 16 bar
Temperature: 80, 120, 170, 200 °C

Wafer check valve. Light weight and small face-to-face. Easy to install and maintain.

Pressure: 45 bar - 55 bar
Temperature: -29 °C - 191 °C

... Optimised seat material with an elastomer coated valve plate Safe working pressures up to 55 Bar (R410A compatible) Multi orientation while maintaining flow direction Built in 30 mesh ...

DN: 15 mm - 1,000 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 180 °C

DN: 50 mm - 500 mm

Cl. 150-300 FLANGED CHECK VALVE TRIM 8 Description •Body in Carbon steel ASTM A216 WCB or Stainless steel CF8M •Class 150-300 •Standard: API 6D •Face to face dimension: ASME ...

DN: 2 in - 16 in
Pressure: 0 psi - 400 psi
Temperature: 0 °C - 80 °C

... 16" Temp Max: 180°F (80°C) Cast iron body with epoxy coating. Flanged connection ANSI B126.1, class 250. Metal to metal seating with stainless steel spring. Note: Viton seal 2-12, 14-16 ...

DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C

... sure to install a minimum of 5 x nominal diameter of straight pipeline in front of and behind the dual plate check valve. Do not install the valves directly onto a pump flange.

Pressure: 0.5 psi - 125 psi
Temperature: 0 °F - 225 °F

Check valve (one way valve) allows flow in one direction only. Internal seal checks reverse flow. Used in applications where back flow is not permitted, or must be redirected. ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 90 °C

BRASS SPRING CHECK VALVE - MBV BRAND Specification Used for water Thread standard: BS 21/ ISO 228-1-2000 Max. working pressure: 16 bar Max. working temperature: 90oC Origin: Vietnam Manufacturer: Minh ...

DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -15 °C - 400 °C

Spring-loaded, compact, stainless steel check valve. 316 stainless steel Spring-loaded 2 lb. or 10 lb. cracking pressures MNPT x MNPT Usable on metering pumps and ...

DN: 50 mm - 1,350 mm
Pressure: 0 bar - 10.3 bar
Temperature: 0 °C - 178 °C

Class 125 Cast Iron Sure Check™ Valves Size: 2 to 54 in. (50 to 1350mm) Description: Designed for liquids and gases where flow reversal can cause surge and water hammer. Elastomer seats provide bubble-tight ...

DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min

The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.

DN: 0.5 in - 4 in
Temperature: 0 °C - 100 °C

Brass swing check valve Diameters from DN015 - ½" to DN100 - 4" Threaded F/F (ISO 228/1) NBR seal Minimum opening pressure 0,03 bar TR CU 010 compliant PN10 (PN6 for DN≥65) Free of CE marking (cat. according ...

DN: 0.5 in
Pressure: 16 bar
Temperature: 4 °C - 100 °C

Brass ball valves with incorporated stainless steel filter, check valves, a blend of manometer and darin. Ball valves are multipurpose for the hydraulic ...

DN: 15 mm - 300 mm
Pressure: 40, 16 bar

It can be used horizontally or vertically. • With the help of a spring, loaded a more watertight and quicker sealing can be obtained. • Distance between sides according to DIN 3202 F-1.

DN: 15 mm - 1,200 mm
Pressure: 1 MPa - 42 MPa
Temperature: -196 °C - 540 °C

The swing check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline. The valve ...

DN: 80 mm - 1,800 mm
Pressure: 0 bar - 50 bar
Temperature: -30 °C - 130 °C

CLASAR®: the valve with high dynamic response, allowing the most effective protection against water hammer from pumps. Available in stainless steel and duplex construction on request. Check ...

DN: 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -25 °C - 180 °C

swing check valve 3/8" inch female thread, body made of stainless steel 1.4408, disc made of stainless steel 1.4408 seal metall installation position: - horizontal ...

DN: 15 mm - 200 mm
Pressure: 9.6 bar - 40 bar
Temperature: 50 °C - 400 °C

Pressure: 350 bar
Temperature: -30 °C - 80 °C

The valve consists of 2 check valves in one body. Characteristics: double check valve in poppet style pressure range up to 350 bar available ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 60 °C

EFFAST CV valve is a PVC-U spring check valve ideal for use in applications that require precise closure and noiseless movement. CV check valve is suitable ...

Pressure: 45 bar

Check valves and stop valves are designed for installation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants: ...

DN: 0.25 in - 1 in
Pressure: 0 psi - 30,000 psi
Temperature: 0 °C - 49 °C

The NuQuip® Model CV Series Check Valve is an in-line, piston style valve offering a zero leak design for applications requiring working pressures up to 30,000 psi (2,068 bar). The check ...

DN: 0.5 in - 40 in
Pressure: 0.4 bar - 20.7 bar

106 / 206-PR-C is used for pressure reducing and check valve which has 10 models. It has an excellent constant flow with drip-tight closing on the return flow and an isolation valve which ...