Tripping current: 0.1 A - 25 A
... current monitoring relays are used for the control of AC and DC current signal in various industrial and domestic applications. The measuring part of the instrument is metallically separated from the current connection ...
Tripping current: 16 A
... Serves for level monitoring in wells, tanks, pools, reservoirsDESCRIPTIONWithin a single switch you can choose 3 configuration:One-state monitors one liquid level ( full or empty).Two-state monitors two levels ( switches at one level ...
ELKO
... with two relay outputs, and you can program which of the parameters are active on each relay. The relays are activated at normal conditions, and releases if one or more of the selected parameters are ...
COMADAN
Tripping current: 12 A
Trigger voltage: 300 V
... Multifunctions monitoring relays - AC voltage monitoring in 3-phase network 3(N)~400/230 V. Type of contacts: 1 CO, 2 CO Technical info Output circuit - contact data: Number and type of contacts 1 ...
RELPOL
... The ENTES Current Monitoring Relays are specially designed to offer protection to the motors and networks against under and over current conditions. The relays are available in four series that include ...
ENTES
... The SM 501 is a supply monitoring device which is suitable for providing protection from phase reversal, phase-phase unbalance and phase loss. It is suitable for 3 phase and wire systems through the voltage sensing mechanism. The device ...
General Industrial Controls (P) Ltd.
Tripping current: 5, 10 A
Trigger voltage: 115, 230 V
... Fluid Level Monitoring Relay 230VAC Sensitivity Adjust On Delay and Off Delay Timer Filling & Emptying Functions Key Features • Compact 36mm Design • Filling and Emptying Functions • LED Indication ...
Tripping current: 5 A
Trigger voltage: 30, 230 V
The BMRCD-01 modular residual current device can be installed with MCCB and MCB in addition to shunt/under-voltage release for residual current protection. BMRCD-01 consists of a controlling module and detecting modules (only B-type detecting modules ...
Trigger voltage: 100 V - 415 V
... network. The trip level is factory set and relay will operate after a delay of approximately two seconds. Relay is fail-safe and energises when powered. Link terminal 6 and 10 to make a non-latching relay. ...
Meagacon AS
Tripping current: 0.2, 4 A
Trigger voltage: 195 V - 253 V
... corresponding red LED lighting up. In the normal operation the output relay is pulled on and the power light (green LED) lights up. In the fault case as well as at loss of the supply voltage the relay drops off and the ...
Elektra Elektronik GmbH & Co. Störcontroller KG
... disappear, the relay turns off. It is available in two versions: • F 22. The relay turns ON only if the sequence is wrong. • F 33. The relay turns ON only if the sequence is right. The leds on ...
ELETTROMECCANICA CDC s.r.l.
... 3-Phase Delta Monitoring Relay, Sequence and Phase Loss, 2 SPDT Relay Outputs, IP20, DIN-rail mounting, Measuring Range 177 to 550Vac, 22.5x83.5x99.5mm housing Mounting Industrial DIN-rail Function Phase ...
... The range includes relays suitable for installations with DIN rail, Panel or Base Mounting. All relays are suitable for use on a.c. systems and will be unaffected by d.c. components which may be present. A range of ...
Tripping current: 0.02 A - 2 A
... product to function. Two monitoring modes available: Under current: In normal operation, the relay is in the energised state (monitored current above the set trip level). When the current decreases below the trip ...
Broyce Control
Tripping current: 0.25 A - 10 A
... points independently adjustable • LED indicators for power supply, relay 1 (R1) and relay 2 (R2) Control relay for monitoring AC and DC voltage with two separately adjustable relay ...
HIQUEL
Trigger voltage: 80, 150, 350, 600 V
... Function Features -Controls its own supply voltage(True RMS measurement). -LCD display. – Measuring frequency range:45Hz-65Hz. – Voltage measurement accuracy<1%. – 2-MODULE,DIN rail mounting. • Control for connection of moving equipment(site equipment,agricultural ...
Zhejiang Geya Electrical Co., Ltd
Trigger voltage: 24 V - 240 V
... the input channels are protected against electromagnetic noise and overvoltage. Two output relays (Alarm-Trip): one output relay for fan control (FAN) and 1 relay for sensor failure or malfunction (TROUBLE) ABS ...
... Universal speed relay for all speed monitoring applications Intuitive user configuration using control buttons and LCD display Relay and solid state outputs with individual speed range monitoring Supports ...
... independent, non-certified incremental encoders, signal splitter, wire monitoring DS260: Input for one certified incremental encoder, signal splitter, wire monitoring The DS series is suitable for safety-related ...
... cams, toothed wheels, segmented discs, metal signal flags or similar. The relay is activated when the operating voltage is applied. After start-up bridging has finished, the monitoring function is started on the E1 and ...
METZ CONNECT
... Monitoring relay for monitoring asymmetry, phase failure, phase sequence errors, overvoltage and undervoltage of a three-phase connection. With external fault acknowledgement. ・Connection with screw ...
METZ CONNECT
... for monitoring an individual phase. All unoccupied inputs have to be connected to the connected phase. If there is an inverse voltage due to the consumer, which exceeds the adjusted threshold value, there is not any fault message. OK ...
METZ CONNECT
Trigger voltage: 24 V - 230 V
... Insulation monitor for electrical installations Current measurement < 1 mA 3-digit screen for reading and configuration Double entry for PTC, PT100 and bimetallic contact probes Optional connection for RS485 and MODBUS-RTU ...
POLYLUX
Tripping current: 35 mA
... recognition parameter change-over wide-range power supply (universal power supply) Pc configurable (optional) inclusive of process monitoring + documentation Technical specifications Series: 22.5 mm rail housing operating voltage: 24-250 ...
Tripping current: 0.15 A
Trigger voltage: 24 V
... as indication, monitoring and setting components are placed on the printed board. Relay actuation indication is placed on the housing front panel. External circuits are connected to the current relay ...
... and overvoltage of each of the phases. – the asymmetry of each phase and loss of neutral. Equipped with a positive safety relay with 1RT contact, it ensures : – an adjustable delayed shutdown when exceeding the setting. – an instantaneous ...
the best suppliers