Multi-channel manifolds

132 companies | 290 products
4-way manifold
4-way manifold
1/2" - 3/4" | 4098 series

The DeltAll system has been specifically developed for the following applications: Distribution of both hot and cold water in sanitary applications Low temperature heating systems (with radiant panels) High temperature heating ...

See the other products
Unidelta S.p.A.
multi-channel manifold
multi-channel manifold
VTD series

The VMECA manifolds allow several attachments in a single, standard and greater BSP attachment. It is essential to preserve pipe bore volume on vacuum loops during the use of two suction pumps. Additionally, the manifolds ...

multi-channel manifold
multi-channel manifold
WPCM1

1 in. diameter manifold trunks are closed at one end and swedged to accept 1 in. copper at the other. Available with 3⁄8 in. and 1⁄2 in. brass CrimpRing™ fittings, with or without 1⁄4-turn brass mini ball valves (MBV), ...

multi-channel manifold
multi-channel manifold
AS series

The stainless steel manifold for three or six filtration units is fitted with stainless steel units. The apparatus can be autoclaved and sterilized by dry heat at up to 180°C. Suitable only for vacuum operation. If flushing ...

multi-channel manifold
multi-channel manifold

... manufacturing components directly in contact with the product such as dosing pumps, filling needles, intermediate tanks, manifolds and handling and storage systems.

multi-channel manifold
multi-channel manifold
JG/S2-35

Operating pressure: 3,000, 5,000, 10,000, 15,000 psi

... control blowout effectively. Kill Manifold consists of check valves, gate valves, pressure gauges and line pipes. One end of the kill manifold is connected to drilling spool and the other to pump.Kill ...

multi-channel manifold
multi-channel manifold

Drilling manifold is composed of mud gate valve, high pressure hammer union, tee, high-pressure hose, elbow, pressure gauge and spacer spool, etc. All parts of drilling manifold that offered by JIELIN ...

multi-channel manifold
multi-channel manifold

Pressure test manifold is a completely equipment of hydraulic pressure test, a necessary device for successfully controlling pressure. Different pressure effects can be obtained during test under the control of pressure ...

multi-channel manifold
multi-channel manifold
120,125,127 series

See the other products
Aircomp by Stampotecnica
4-way manifold
4-way manifold
311.34 series

Operating pressure: 60 bar
Port size: 8.5, 13, 17 mm

The traditional fittings line have a large products range in order to meet the most varied application needs.

See the other products
Aircomp by Stampotecnica
6-way manifold
6-way manifold
311.35 series

Operating pressure: 60 Pa

The traditional fittings line have a large products range in order to meet the most varied application needs.

See the other products
Aircomp by Stampotecnica
multi-channel manifold
multi-channel manifold
JXAC 4125

2-channel manifold
2-channel manifold
HM01

... Outlets Brass Manifold Additional Info Packaging: Neutral packing Brand: PLB, OEM Transportation: Ocean,Land,Air Place of Origin: China Certificate: ISO9001 Port: Ningbo,Shanghai Product Description 2-10 ...

multi-channel manifold
multi-channel manifold
HM08

Port size: 0.75 in - 12 in

... Brass Heating Manifolds Additional Info Packaging: Neutral packing Brand: PLB, OEM Transportation: Ocean,Land,Air Place of Origin: China Certificate: ISO9001 Port: Ningbo,Shanghai Product Description Brass ...

multi-channel manifold
multi-channel manifold
772208

Operating pressure: 200 bar
Port size: 32 mm

... Features A manifold with flexible hoses compliant to EN 13769 Working pressure 200 pressure Individual serial number Connections are W24.32mm x 1/14" for inert gases WSS will take care of requalification ...

multi-channel manifold
multi-channel manifold
PE-100

Operating pressure: 42 bar

... fluids: Manifolds made of High Density Polyethylene PE-100.These manifolds can be manufactured in diameters ranging from Ø50 up to Ø1000 mm. They have great versatility of design, allowing any type of ...

multi-channel manifold
multi-channel manifold
3A4A

1.It is available to integrate the direction control valves of the same series to form value group to save space and cost. 2.It is easy to examine when there are faults owning to the unified air intake and exhaust and unified wiring. 3.Flexible ...

2-channel manifold
2-channel manifold
749B

Operating pressure: 17 bar
Port size: 0.5 in

... the supply cylinder (when gas is exhausted) to the reserve cylinder automatically. Type 749B is a large capacity changeover manifold for commercial and industrial applications. It consists of two 64 Series regulators ...

See the other products
FISHER REGULATORS
multi-channel manifold
multi-channel manifold
Mathena™

Operating pressure: 5,000, 10,000, 15,000 psi

The Mathena™ choke manifold safely controls well flow using several, flexible gate valves and block configurations. The choke manifold platform easily adjusts to various heights and can be ordered in ...

5-way manifold
5-way manifold
M20S15 series

Operating pressure: 600, 400 bar

S Type Fitting of 2 Way Direct Mount Manifold 2 Way Direct Mount Manifold Products Found: 18 Bonnet Type - Connection Type - Connection Size O-Ring Bonnet - Female ...

See the other products
HAM-LET
multi-channel manifold
multi-channel manifold
BSx series

BS2-BC2-BM2 Series Subplates CETOP 2/NG04 BS3-BC3-BC06-BM3 Series Subplates CETOP 3/NG06 BS5-BC5-BM5 Series Subplates CETOP 5/NG10 BA60 Series Low/High pressure - Max flow 60 l/min BA130 Series Low/High pressure - Max flow 130 l/min BS5RIA ...

multi-channel manifold
multi-channel manifold

Operating pressure: 5,000 psi - 25,000 psi

... Cameron choke manifold systems manage well pressure fluctuations encountered during drilling by diverting flow through a series of valves and chokes. Cameron was the first to provide 20,000-psi and 25,000-psi choke ...

See the other products
CAMERON
multi-channel manifold
multi-channel manifold
AS6

Operating pressure: 414 bar
Port size: 0.25 in

The simplest and most effective means to install and calibrate Rosemount® Coplaner™ style transmitters

multi-channel manifold
multi-channel manifold
Furon® CDV

Port size: 0.5 in

The uniform modular design of the Furon® CDV manifold valve is ideally suited to support customized manifold configurations. The CDV Manifold is ideal for semiconductor process, high ...

See the other products
Saint-Gobain Performance Plastics - Process System
2-channel manifold
2-channel manifold
HMD 2 C

Operating pressure: 720 bar

FLOWPANEL CONTROL MANIFOLD HMD 2 C FlowPanel - Valve blocks - double-acting 720 bars.

See the other products
Holmatro Industrial equipment
multi-channel manifold
multi-channel manifold
BGMA

The Binary Gas Manifold (BGMA) has equal conductance at each outlet for the most even gas flow and the fastest reactive sputtering response time, regardless of manifold length. Flow uniformity is verified ...

See the other products
Sputtering Components
multi-channel manifold
multi-channel manifold
79.0 series

Port size: 0.13 in - 0.75 in

The vacuum manifold, manufactured by Fipa Material in Motion, has been integrated with a 2x 1/8 input connection and a 2x M5 output connection. This vacuum manifold can also be harbored where the opening is located.

5-way manifold
5-way manifold
Type A

See the other products
Whizcut of Sweden AB
multi-channel manifold
multi-channel manifold

Port size: 0.25, 0.13, 0.38, 0.5 in

- For manifold bases external pilot is common - A base is ordered as internal pilot and can be changed into external pilot by removing pipe plugs from the external pilot ports (individual base). - Manifold ...

3-way manifold
3-way manifold
FJA

Port size: 13 mm - 20 mm

AMOT model FJA temperature and filter manifolds are fully automatic, 3-way fluid temperature controllers for diverting or mixing applications. They are available in ¾” size. The filter manifold are ...