... Re-establishes electrical conductivity, eliminating current leakage. Does not break contacts, does not create arcs and dissolves oxides, oils, grease, deposits, tar and combustion residues. Its dielectric characteristic restores contacts ...
arexons
Operating temperature: 40 °C
... A kind of free chlorine efficient cutting oil,the lubrication performance is excellent,excellent surface quality and longer wheel life.Suitable for stainless steel,cast-iron, and carbon steel and high alloy steel,turning milling, boring, ...
Boer Technolog Co., Ltd.
Operating temperature: 5 °C - 40 °C
Flash point: 180 °C
... Mineral oil free metalworking oil for medium to severe machining. Developed specially for medium to severe cutting of high alloyed steel. In addition to the use of high-alloyed and non-rusting steel, it also exhibits ...
Jokisch GmbH
Operating temperature: -56 °C - 260 °C
Pour point: -66, -48 °C
Flash point: 232, 220, 150 °C
... Lightweight Oils are available in viscosities ranging from ISO 10 to ISO 68. Super Lube® Multi-Use Synthetic Lightweight Oils exhibit superior performance in a wide range of applications. Super Lube® Multi-Use Synthetic ...
Synco Chemical Corp
Operating temperature: 5 °C - 25 °C
Wekem
Operating temperature: -70 °C - 288 °C
... of the ingredients, Krytox grease and oil lubricants have an indefinite shelf life if unopened and stored in a clean dry location. Greases might show oil separation after extended storage but mixing ...
Miller-Stephenson Chemical Co
Flash point: 150 °C
... produce soot; And easy to use detergent or solvent cleaning; 3.Low oil mist: contain high efficiency oil mist settling agent, can quickly condense the oil mist produced by impact into oil ...
AMER Technology Co., Ltd.
... PAG lubricants have been developed for Automotive applications, specially with the use of R134a refrigerant gas. Errecom PAG oils are a mixture of polyalkylene glycols and additives specially formulated to achieve a better lubricity, ...
Operating temperature: -40 °C - 0 °C
... Specific lubricating oil for pneumatic tools, totally synthetic, biodegradable, free of compounds classified as dangerous and free of odor. It has exceptional resistance to low temperatures, down to -40 °C, preventing the formation of ...
CAMP S.r.l.
... Multigrade synthetic motor oil of the latest generation that meets the requirements of the “Mid SAPS” class with low content of sulphated ash, phosphorus and sulfur. It is developed on the basis of the modern, deeply refined base oils ...
Optimal Oil
Pour point: 0 °C - 35 °C
... high contact reliability and high life expectancy. Easy application in three steps: 1. Open the oil bottle, 2. Screw on pump spray attachment, 3. Apply oil spray ...
SCHLEIFRING GmbH
Pour point: 4, 0, -24, -40, -15 °C
Flash point: 160, 150, 175, 180, 310 °C
... SERMAS has developed a whole range of consumables dedicated to the aluminium industry to meet highest technical requirements of its customers. All our blades are designed to offer optimized consumption and high-quality surface finish of the products ...
... high-performance oil is designed to provide outstanding low-friction properties to reduced wear and inhibit corrosion. EP-50 hydraulic, high-performance oil is designed to provide superior lubrication to prevent wear ...
Premium, heavy-duty minimum quantity lubricant with chlorinated extreme pressure additives.
Accu-Lube (ITW)
Operating temperature: 300 °C
... high temperature resistant silicone oil (long chain alkyl, aralkyl modified polysiloxane) Product alias: High temperature resistant silicone oil High temperature heat conduction oil High temperature ...
Iota silicone oil (Anhui) Co.Ltd
Operating temperature: 30, 49 °C
... Sewing Machine Oil,multipurpose metal maintance agent,for hardware machine tools,plastic mold,etc. Item NO.:Sewing Machine Oil Order(MOQ):1200 Payment:L/C, T/T Product Origin:Guangdong, China (Mainland) Color:white Shipping ...
Dongguan Dayang Aerosol Chemical Technology Co., Ltd.
... This non-flammable, water-based cutting oil improves metal cutting operations and increases efficiencies in machining operations. Lubricates and cools at the cutting point Recommended for use on all metals including stainless steel ...
Aervoe
Operating temperature: -25 °C - 250 °C
... APPLICATION COMPRESSIA is a lubricant for piston, oil injection and dry rotary air compressors, centrifugal compressors and vacuum pumps (ISO68 or ISO 100). TECHNICAL PERFORMANCES Exceptional oxidation resistance. Excellent ...
MYLUBRICANTS
... the cutting edge of the tool, reducing friction and extending tool life AL-2000 is a fully synthetic fluid containing no petroleum and is non-toxic, non-flammable, and nonpolluting. AL-2000 is designed for use with an air driven spray ...
DoALL Sawing Products
... surface. Use Axxanol™ 34CD to protect parts during program changeover periods in the assembly process. After allowing metals to dry completely, place them into ZERUST® Vapor Corrosion Inhibitor (VCI) packaging products for a more robust ...
... Meets or exceeds OE requirements • Increased differential life • Less friction related power loss • Diminishes differential oil’s greatest enemy, heat. • Helps mechanisms operate freely ...
QMI, an ITW Company (Mfg., Svc.)
... 1 US Quart of special synthetic vacuum pump oil. 1 US Quart special vacuum pump oil for heavy duty systems. ...
... P-80® Grip-It is an assembly lubricant based on a quick-drying, water-based surfactant and polymer mixture. P-80® Grip-It eases installation on tight-fitting rubber and plastic parts by reducing the friction and the time needed for assembly. ...
... Comprag oil protects compressors and pneumatic tools from wear and tear and prevents condensate separating and oil foaming. Comprag ScrewLub universal mineral oil for stationary and portable screw compressors. Distinguishing ...
... Chain Lube is a spray type lubricant that was developed specifically for chains. It has outstanding features that lengthens the chain life preventing it from wearing and maximizes the chain's transmission efficiency. Applications ¡Roller Chains for Power Transmissions ¡O-ring ...
... SCREW AND PISTON) ENERGY+ series oils are formulated with high quality base oils and performance enhancing additives which increase oxidation resistance and ensure good wear and corrosion protection. ENERGY+ series ...
Compresores Josval, S.L.
... Antifreeze lubricant for pneumatic tools (vibrating pokers, pneumatic drills, and any other pneumatic tool) • Avoids water condensation, • Restrains frost on leakage, • Protects the metallic surfaces from oxidation, • Avoids frost and breakdown ...
... - Developed with Chevron Corporation, and Texaco fuel technology - Seven key elements to aid engine efficiency - Enhances effectiveness of fuel pump and fuel injector - Maximizes cleaning ...
Delphi technologies
Atlas Copco Kompressoren und Drucklufttechnik GmbH
Operating temperature: 200 °C
Atlas Copco Kompressoren und Drucklufttechnik GmbH
Operating temperature: 200 °C
Atlas Copco Kompressoren und Drucklufttechnik GmbH
Operating temperature: 0 °C - 250 °C
Pour point: 40 °C
Flash point: 230 °C
... adhesion Excellent creep properties despite high viscosity Very high wear protection Technical Data Base oil: Synthetic hydrocarbon oil Color: Green, clear Viscosity: Approx. 1800–2200 mm²/s at 40 °C Operating ...
... improved lubrication at high and low temperatures, reduced volatility, and compatibility with mineral oils and equipment designed for use with mineral oils. RotorLub 4000FG is a long-life lubricant especially formulated ...
Champion Pneumatic
... the market. Products and accessories from the AC Essentials line: PAG/POE oils for R134a and R1234yf Sanitizing line UV test line Leak test devices Filters Pump oil Special functions kits ...
... Provides corrosion protection to lubricating or hydraulic oils in indoor or open air conditions. Forms a tenacious film that clings to metal surfaces, giving excellent contact corrosion protection. In addition to this ...
Cortec Corporation
... This oil is specially designed in its composition and viscosity for the operation of pneumatic tools. ...
... This oil is specially designed in its composition and viscosity for the operation of pneumatic tools. ...
... Used together wih H/.. and M/.. granulates and polishing powders. The grinding oil creates a bond between the substrate and the polishing powder. The grinding oils are also suitable for regreasing dried-out granulate ...
... Delivery time (Days):3 Weight (kg): 0.6000 NEFF LUBE 320, Gear oil for lubrication of spur gears, bevel gears and worm gears, Neff Gewindetriebe Technical Data Weight - 0,6000 kg Delivery time - 3 Google Shopping, [title] ...
Excellent lubricating and cooling effect. Increases tool life by excellent lubricity, even at low concentration. Transparent solution does not stick, prevents corrosion, clear view of machine, workpiece and tool. Skin friendly, free of PCBs, formaldehyde, ...
... This cutting / lubrication oil is a fantastic coolant product. The composition of the cutting / lubrication oil consists of paraffanic mineral oils with anti wear additives and anti fog ...
... Purely vegetable oil that does not come under the category of hazardous goods in terms of customs & transport regulations. The raw materials used are not listed in the Catalogue of Substances Hazardous to Water. BDS 5000 is not subject ...
Operating temperature: 50, 40 °C
Pour point: -12 °C
... Mineral hydraulic extra fluid oil Viscosity : •10 Cst at 40°C •1,9° Engler at 50°C Pour point : -12°C ISO VG : 10 Available in 2, 5, 10 and 20 liters cans. ...
the best suppliers