- Materials - Tools - Components >
- Lubrication >
- Industrial oil
Operating temperature: -20 °C - 100 °C
Pour point: -30 °C
Flash point: 200 °C
... temperature chain oil LHMT 68 is a high-performance mineral oil specially formulated for the lubrication of chains operating at medium temperatures. It provides excellent anti-wear and anti-corrosion ...
Operating temperature: -20 °C - 250 °C
... or residues, even when operating at high temperatures. SKF Chain oils are specifically designed for industrial chain applications and can be used in virtually every industry Features ...
Viscosity: 0.000025 m²/s
... mineral oil, sulfur or chlorine Viscosity (SUS): 125 Hazardous OSHA: No Hazardous DOT: No Size Available: 18.91 L (5 gal) pails, 209.21 L (55 gal) drums FEATURES & BENEFITS Typically used to hone critical parts ...
Sunnen Products Company
Viscosity: 0.000011 m²/s
... viscosity creates less oil "carry off" and makes cleaning easier Also an excellent screw machine and general purpose cutting oil Compatible with the oil and ...
Sunnen Products Company
Viscosity: 0.000031 m²/s
Man-852 is a non-hazardous, ecologically responsible, unregulated honing oil composed entirely of natural surface active lubricity agents. Because this product does not use additives, it is ideally suited for applications ...
Sunnen Products Company
Viscosity: 0.000138, 0.000015 m²/s
Flash point: 280 °C
Formulated with hydrocracked base oils selected for their high thermal stability, nitration and oxidation resistance Highly detergent and dispersant to reduce deposits formation Excellent TBN retention and antiwear ...
Viscosity: 0.000019, 0.00046 m²/s
Pour point: -45, -51, -42 °C
Flash point: 264, 276, 272 °C
... in the food industry such as chains and conveyor belts. Nevastane XSH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments. ...
Operating temperature: -20 °C - 140 °C
Viscosity: 0.000068 m²/s
Multipurpose lubricant for daily lubrication Water resistant - Antioxidant properties Propellant CO2 T° range of use: -20 / +140 °C Certifications NSF H1
Operating temperature: 264, 249 °C
Viscosity: 0.00006, 0.000128, 0.000094 m²/s
... mineral oils. This oil is used for the first filling of RE / RZ / RC series pumps. Many pumped substances can cause deterioration of common pump oil, leading to mechanical problems. ...
AIRPRESS oils are multifunctional fluids based on mineral oil and ester oil. They offer good lubricating capacity and corrosion protection. AIRPRESS oils have a foam-reducing ...
... Maximum machine life even at high operating temperatures due to good lubricating, spreading and wetting properties Reduced oil consumption and fume formation due to low evaporation losses at high temperatures Regenerates ...
HOTEMP SUPER CZ 2-80 is a low viscosity, thermally stable lubricating and cleaning oil. Benefits for your application Regenerates and dissolves pasty oil residues, thus reducing need for maintenance ...
... up to grinding, superfinishing and honing. A complete range of neat oils, based on highly refined base oil and proven technology formulated without chlorinated paraffin, meets metalworking requirement ...
Our soluble cutting oils are designed to help you reduce coolant use and meet your machining needs. Castrol’s high-performance soluble cutting oils are designed to help you reduce ...
From multi-service to specialist chain lines, Castrol has the right chain oil for various applications and environmental conditions Viscogen KL comprises thermally stable synthetic lubricants designed for high temperature ...
Operating temperature: 50 °C - 130 °C
Viscosity: 0.000101, 0.000011 m²/s
Pour point: -15 °C
ALTERNA 100 is a premium ash-free lubricant for the lubrication of reciprocating air compressors and vacuum pumps.
... carbon steel, brass, aluminium, copper. - Ideal for the generation of air-oil micro particles Dropsa’s MaXtreme MQL System - Promotes extended tool-life This is a whole oil with marked characteristics ...
Pour point: -57, -51, -45, -42, -39 °C
Flash point: 243, 244, 249, 246 °C
... and temperatures rise. A foam suppressant completes the package. The base oil and additive formulation works synergistically to reduce wear, extend oil drain intervals, reduce oil consumption, ...
Pour point: -30 °C - -12 °C
Flash point: 210 °C - 246 °C
Monolec® R & O Compressor / Turbine Oil is a versatile, heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate ...
Pour point: -33 °C
Flash point: 430 °C
Monolec® Centrifugal Compressor Oil (6260) A high quality compressor oil designed specifically for use in centrifugal air compressors. Formulated with highly refined select paraffinic base stocks synergistically ...
Operating temperature: -25 °C - 250 °C
APPLICATION COMPRESSIA is a lubricant for piston, oil injection and dry rotary air compressors, centrifugal compressors and vacuum pumps (ISO68 or ISO 100). TECHNICAL PERFORMANCES Exceptional oxidation ...
Operating temperature: -50 °C - 255 °C
APPLICATION For air saw compressors TECHNICAL PERFORMANCES Exceptional oxidation resistance. Excellent protection against the wear. Low foaming power. Excellent corrosion resistance. Excellent detergent and scattering power. Excellent ...
Operating temperature: -25 °C - 200 °C
APPLICATION Universal oil for the lubrication of the Diesel engines (suralimentés or atmospheric) and gasoline engines in all the conditions of service. For the hydraulic systems where an engine oil ...
Operating temperature: -43 °C - 232 °C
Pour point: -29 °C
Flash point: 220 °C
... Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® (PTFE) particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. It ...
Synco Chemical Corp
Operating temperature: -10 °C - 320 °C
200 ltrs. drum HTF mineral oil for heat transfer that can be used in any type installations with maximum outlet temperature of 305 °C boiler wall and maximum temperature in the boiler of 320 °C Mineral oil ...
Operating temperature: 275 °C
200 ltrs. drum HTF synthetic oil for heat transfer that can be used in any type installations with maximum outlet temperature of 275 °C boiler wall. Synthetic oil with excellent thermal oxidation stability ...
Operating temperature: -10 °C - 315 °C
Viscosity: 0.3 m²/s
Drum of 200 liters of synthetic thermal oil for use in indirect heat processes (-10 º C to 315 º C). Advantages: - Shows a considerably higher thermal stability of oils used for the same purpose - With ...
To lubricate precision instruments, textiles and office machinery, hinges, locks. Odourless, colourless, non-staining lubricant. Pharmaceutical liquid petrolatum based. Effectively lubricates sliding surfaces and food packing equipment.
... SCREW AND PISTON) ENERGY+ series oils are formulated with high quality base oils and performance enhancing additives which increase oxidation resistance and ensure good wear and corrosion protection. ENERGY+ ...
Compresores Josval, S.L.
Viscosity: 0.000008 m²/s - 0.00001 m²/s
Pour point: -27, -42, -18, -24 °C
Flash point: 178 °C - 232 °C
Lubrication and hydraulic oils with additives to improve the ageing and oxidation stability. Good wear protection, demulsifying (good water seperation), good air release properties, zinc-containing AW/ EP additive ...
FUCHS PETROLUB SE
Operating temperature: -20 °C - 150 °C
Viscosity: 0.00015 m²/s
... loss or recirculating lubrication systems. ROCOL FOODLUBE Seamer Fluid 150 is a tenacious, extreme pressure (EP), synthetic oil containing additives to boost performance, improve adhesion and provide excellent corrosion ...
A high tech oily PTFE based lubricant that creates a very thin, protective and colourless lubricating film. It is water repellent and it displaces moisture, dirt and dissolves encrusted deposits as it penetrates, even in those hard to ...
An extremely fluid protective and anticorrosive lubricating oil for professional use. Specific for the lubrication of pneumatic tools, installations and equipment in the industrial and agricultural fields. It ...
Operating temperature: -40 °C - 0 °C
... Applications Specific to lubricate pickers, shakers, scissors, hacksaws, hedge trimmers, pruners and other pneumatic tools for agro-industrial use, maintenance equipment for garden and hobby. Advantages – Anti-condensation, ...
Operating temperature: 0 °F - 150 °F
A medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives. It is a 20W, non-detergent oil. APPLICATIONS: Hydraulic ...
... threading, milling and cutting of hard metals and stainless steel. This product is made of high lubricating capacity mineral oils. Designed for both manual and semi-automatic machining processes. It lubricates, reduces ...
Operating temperature: 5 °C - 40 °C
Mineral oil free metalworking oil for medium to severe machining. Developed specially for medium to severe cutting of high alloyed steel. In addition to the use of high-alloyed and non-rusting steel, ...
Semi-synthetic cutting fluid for cutting and rectification operations on all kinds of metals (steel, copper, aluminum, stainless steel, etc.). This cutting fluid provides a significant extension of the life time of cutting tools and ...
Heavy lubricating oil for driving and transport chains. High performance, foaming lubricant containing PTFE. CRC Chain Lube IND is compatible with o-rings, highly resistant to splash water and prevents corrosion to ...
Biodegradable cutting oil. Natural straight oil, free of chlorine, for cutting operations in ferro, non-ferro and aluminium. Cools by transferring heat away from cutting tools, reduces heat created ...
Operating temperature: -35 °C - 175 °C
Viscosity: 0.000005 m²/s - 0.000065 m²/s
Pour point: -42, -45, -39 °C
Flash point: 204, 197, 192 °C
... compression temperatures or extended oil drain intervals – where other synthetic oils do not meet service life expectations. Mobil SHC Rarus Series synthetic air compressor oils are ...
ExxonMobil Lubricants & Petrol Spec
Even though the gears and transmission systems used in the industrial sector are simpler than those used in the automotive sector, some of them still need special lubricants to deal with the amount of strain put on them. ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Help us improve:remaining