Oils
Viscosity: 0.000016, 0.000023 m²/s
Flash point: 180, 200 °C
... Improvement to operators health due to almost no carcinogenic compounds as polycyclic aromatic hydrocarbons present in the oil. Reduced oil mists and less product consumption through evaporation, due ...
TotalEnergies Lubrifiants
Operating temperature: -3 °C - 240 °C
... cutting lubricant VALONA MS 7010 BIO is a vegetable oil cutting oil designed for turning, drilling, tapping, grinding and honing on ferrous and non ferrous metals. VALONA MS 7010 BIO is a neat cutting ...
TotalEnergies Lubrifiants
Viscosity: 0.00046, 0.00068, 0.001 m²/s
Flash point: 310, 306, 300 °C
Viscosity :ISO VG 1000 Good compatibility with seals. High ignition point. Benefits from advanced refining. Low carbone residue.
TotalEnergies Lubrifiants
Flash point: 260 °C
... pump oil has excellent viscosity characteristics. Its good chemical resistance, low vapor pressure as well as its better stability when pumping oxidants such as acid and alkaline vapors, makes it superior compared to ...
Operating temperature: -40 °C - 300 °C
Flash point: 0 °C
Operating temperature: -5 °C - 60 °C
Food grade dry film lubricant SKF LDTS 1 has been specially developed for automatic lubrication of plastic flat top chain conveyors in the beverage processing industry. The lubricant consists of synthetic oil ...
SKF Maintenance,Lubrication and Power Transmission
Operating temperature: -30 °C - 130 °C
General purpose food grade chain oil LFFM 100 is a high-performance synthetic chain oil specially formulated for the lubrication of chains operating in food processing and pharmaceutical industries. ...
SKF Maintenance,Lubrication and Power Transmission
Operating temperature: 250 °C
High temperature food grade chain oil LFFT 220 is a high performance synthetic oil specially formulated for the lubrication of chains operating at high temperatures and high loads in food processing ...
SKF Maintenance,Lubrication and Power Transmission
Viscosity: 0.000011 m²/s
... less "carry off" of oil on the motor block and is easily cleaned in hot tanks or spray washers Compatible with the oil and filter system of all Sunnen Honing Machines and other manufacturers' machine ...
Sunnen Products Company
Viscosity: 0.000025 m²/s
... mineral oil, sulfur or chlorine Viscosity (SUS): 125 Hazardous OSHA: No Hazardous DOT: No Size Available: 18.91 L (5 gal) pails, 209.21 L (55 gal) drums FEATURES & BENEFITS Typically used to hone critical parts ...
Sunnen Products Company
Viscosity: 0.000011 m²/s
... Performs well as a screw machine or general purpose cutting oil Compatible with the oil and filter system of all Sunnen honing machines and other manufacturers' machine tools in which petroleum ...
Sunnen Products Company
Operating temperature: -10 °C - 120 °C
Multipurpose mineral oil aerosol. It is suitable for applications in the food, pharmaceutical and similar industries. Product Sizes 400 ml can - 12 per carton Key Properties An aerosol that utilizes a 100 cSt ...
Dow Corning
... up to grinding, superfinishing and honing. A complete range of neat oils, based on highly refined base oil and proven technology formulated without chlorinated paraffin, meets metalworking requirement ...
CASTROL Industrial
WD-40 Specialist® Bike Wet Chain Lube is a high-performance lubricant specifically formulated for muddy & extreme conditions. The Wet Chain Lube provides a durable coating that helps repel water and mud, and helps protect bike's chain ...
AIRPRESS oils are multifunctional fluids based on mineral oil and ester oil. They offer good lubricating capacity and corrosion protection. AIRPRESS oils have a foam-reducing ...
Klüber Lubrication
Today’s vehicles need a motor oil that keeps pace with their changing demands and does more to improve performance and engine life. This is why Shell came up with an entirely new way to produce synthetic base oils, ...
Shell Lubricants
Pour point: -6 °C
Flash point: 250 °C
MaXtreme oil is a pure oil with marked ecological characteristics, formulated with natural base components. It is formulated specifically for Minimum Quantity Lubrication systems, and it is ideal ...
High-performance cutting fluid for producing thread connections or cutting metal. The 5 liter canister is ideally suited for using the cutting fluid with stationary machines. Permitted for drinking water installations according to ...
Viscosity: 0.00009 m²/s
Pour point: 230 °C
Flash point: -30 °C
... performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous ...
OKS Spezialschmierstoffe GmbH
Operating temperature: 0 °C - 200 °C
Viscosity: 0.000108 m²/s
Pour point: 240 °C
OKS 310 is a high-temperature oil with MoS₂ for lubrication of machine elements up to +450°C. Technical specifications density (at 20°C): 1.01 g/cm³ four-ball test rig welding load: 2,800 N Applications For best ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -30 °C - 180 °C
Viscosity: 0.00047 m²/s
Synthetic lubricant for indoor and outdoor machine elements subjected to high pressure or corrosive influences. Areas of application Lubrication of fast-running drive chains of all designs for open or semi-open operation without a ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -10 °C - 225 °C
Flash point: 210, 220, 240, 230, 235 °C
Elesa Lubricantes
Flash point: 240, 210 °C
Monograde mineral engine oil for diesel engines. Especially recommended for construction, OP, agricultural machinery,... with or without turbochargers. Available in 1, 5, 20, 50, 50, 209, 1000 litre formats. ISO viscosity ...
Elesa Lubricantes
Operating temperature: -30 °C - 215 °C
Flash point: 130 °C - 230 °C
Developed for use in hydraulic systems and circuits with hydrostatic systems. High anti-wear protection. Its low freezing point facilitates work in winter. Viscosity index greater than 110. Available in 1, 5, 20, 50, 209, 1000 litre sizes. ...
Elesa Lubricantes
Operating temperature: 40 °C
base oils & additives for manufacturers --------------------------------------------- VOLTRION electro-ionized bases are unique sustainable base oils for the lubricants & metal working industry. These ...
VOLTRION BV
... environmental protection pure vegetable trace lubricating oil, completely soluble in cold water. Product Benefits: Eliminate coolant: no oil mist, improving air quality Eliminate coolant ...
Operating temperature: 320 °C
200 ltrs. drum HTF mineral oil for heat transfer that can be used in any type installations with maximum outlet temperature of 305 °C boiler wall and maximum temperature in the boiler of 320 °C Pirobloc HTF-MINERAL ...
Pirobloc
Operating temperature: -6 °C - 275 °C
... HTF synthetic oil for heat transfer that can be used in any type installations with maximum outlet temperature of 275 °C boiler wall. Pirobloc HTF-HIGH FLASHPOINT is a fluid for heat transmission specially formulated ...
Pirobloc
Operating temperature: -10 °C - 315 °C
Viscosity: 0.3 m²/s
Drum of 200 liters of synthetic thermal oil for use in indirect heat processes (-10ºC to 315ºC). Pirobloc HTF-ULTRACLEAN is a synthetic thermal oil for cleaning of systems of heat transfer in liquid ...
Pirobloc
Operating temperature: -43 °C - 232 °C
Pour point: -29 °C
Flash point: 220 °C
Super Lube® Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® (PTFE) particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. ...
Synco Chemical Corp
The shear spray lubricant is the first of a series intervening in the hollow glass manufacturing process. It will define, along the kind of water, of mixing and distribution system in place, the level of quality of the final product. The ...
SOGELUB
The purpose of lubricants for the delivery systems is to control the gob slipping speed from the gob accelerators to the blank mould drop, through the scoops and deflectors. They can either be sprayed at the highest point, at the accelerator ...
SOGELUB
First, these lubricants act as a release agent, preventing the hot glass from sticking to the mould. In order to develop this product range, SOGELUB® initiated a technical survey about the needs and expectations of the glass professionals. ...
SOGELUB
... Re-establishes electrical conductivity, eliminating current leakage. Does not break contacts, does not create arcs and dissolves oxides, oils, grease, deposits, tar and combustion residues. Its dielectric characteristic ...
arexons
... viscosity of base oil ASO OIL reinforcement contains extremely fine particles of molybdenum disulphide for addition to all types of basic mineral oils forming a stable suspension. ASO ...
ROCOL
Operating temperature: 0 °C - 280 °C
Outstanding resistance to oxidation Solvent free formulation Excellent penetration Clean, residue free film Suitable for automatic lubricators Temperature range 0°C to +280°C Low fuming NSF H2 Registered BAKERLUBE CL is a NSF ...
ROCOL
Operating temperature: -30 °C - 150 °C
High Performance Aerosol Lubricant Spray For EP Chain and Conveyor Unbeatable superior corrosion protection Outstanding EP performance with a weld load of 200kg Ideal for wet, humid and hostile conditions Good water displacing properties Extends ...
ROCOL
Viscosity: 0.00068, 0.00011 m²/s
Flash point: 200 °C
Berusynth PG 680 H1 is a high performance synthetic lubricating oil with H1 registration for the food, feed and pharmaceutical industries. Berusynth PG 680 H1 contains no allergens and is free of MOAH. Examples of ...
CARL BECHEM
Viscosity: 0.00046, 0.000072 m²/s
Pour point: -36 °C
Flash point: 200 °C
Berusynth PG 460 H1 is a high performance synthetic lubricating oil with H1 registration for the food, feed and pharmaceutical industries. Berusynth PG 460 H1 contains no allergens and is free of MOAH. Examples of ...
CARL BECHEM
Viscosity: 0.00022, 0.000039 m²/s
Pour point: -36 °C
Flash point: 200 °C
Berusynth PG 220 H1 is a high performance synthetic lubricating oil with H1 registration for the food, feed and pharmaceutical industries. Berusynth PG 220 H1 contains no allergens and is free of MOAH. Examples of ...
CARL BECHEM
Viscosity: 0.000129, 0.000019 m²/s
Pour point: -46 °C
Flash point: 243 °C
IGOL RACE FACTORY 0101 10W-50 is a 100% Synthetic Ester and PAO based engine lubricant, specially formulated for powerful, sporty, high speed engines. Improves power by reducing friction and wear. Suitable for petrol and diesel engines ...
IGOL
Operating temperature: -25 °C - 300 °C
Flash point: -25 °C
... conditions. These include extended periods at high temperatures and under corrosive chemical atmospheres. Key properties Oil version; ideal for use in applications with high insertion forces Reduces friction and ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining