Open pumps

Flow: 5.1 l/min - 70 l/min
Head: 4.1 m - 15 m
Power: 6 W - 72 W

... canned centrifugal pumps have been added. Tachometer feedback (rotation speed pulse output Note 1) is possible at the same time as the pump variable input signal. It is compact, lightweight, low noise, ...

Flow: 160 l/s
Head: 65 m
Power: 15 kW

K+ DN 65 ÷ 200 K+ ELECTRIC SUBMERSIBLE PUMPS DN 65 ÷ 200 High-efficiency electric submersible pumps for raising waste water. Expressly designed for pumping residential and industrial waste, in drainage ...

Flow: 1 m³/h - 300 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

... sealing and the pumps are also equipped with reliable bearing bracket, especially developed to be suitable even under heavy duty service. Design: UCL range shares the same hydraulic design with the UTN series (magnetic ...

Flow: 4, 9.1 l/min
Head: 10, 12 m
Power: 55, 35 kW

Hot Water Circulation Pumps HBS-12 Model:HBS-12 SHIMGE Pump has been committed to technical researches, manufacturing Hot Water Circulation Pumps , as well as providing first-class ...

Flow: 0 m³/h - 13,000 m³/h
Head: 0 m - 82 m

... vertical single stage solids handling pump DISCHARGE & PERFORMANCE • Delivery up to 900 mm FEATURES • Solids handling up to 300 mm • Mechanical seal or gland packed • Impeller enclosed or semi open ...

Flow: 65 m³/h
Head: 29 m
Power: 4, 5.5, 7.5 kW

Electric centrifugal pumps Suction connections: G 3″ f o DN 80 Delivery connections: G 2″1/2 m o DN 65 * The performance values refer to primed pumps (with water at 20°C) with open ...

Flow: 25,000 m³/h
Head: 150 m

... For a horizontal split case pump, it only needs to open the pump cover, instead of loosening the inlet and outlet pipeline of the pump, for overhaul; It has a wear ...

Flow: 302 l/min - 1,043 l/min
Pressure: 8.6, 12.1 bar
Fluid temperature: -32 °C - 191 °C

... Vane Pumps, are part of the Iron Line of sliding vane pumps, feature and open-rotor design and have been specifically designed for the high-temperature transfer of thick, viscous fluids, ...

Flow: 30 m³/h - 5,000 m³/h
Head: 10 m - 400 m
Power: 4 kW - 710 kW

... efficiency, energy saving, reliable and good suction performance. Guide vane type pump body, compared with pump casing type pump body, the radial force is eliminated to ensure that pump ...

High-performance 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ownership. Fluid Type Viscosity and solids where open inlet is required Fluid Supply Via ...

Flow: 200 m³/h
Head: 45 m
Power: 132 kW

... vertical pumps type PVI Construction Single-stage submersible vertical centrifugal PVI pumps cantilevered or with foot bearing depending on size and depth of immersion. Semi-open ...

Flow: 0 m³/h - 800 m³/h
Head: 1.5 m - 7.6 m
Power: 0.75 kW - 90 kW

... provide access to the inside of the pump allowing return to service in minutes. Wide margin, easy passage of solids. Semi-open impeller. Possibility of installation at ground level, only with the suction ...

Flow: 0.3 m³/h - 30 m³/h
Head: 0 m - 310 m
Power: 0.55 kW - 30 kW

... on the pumps from drive side shaft sealcord seal or end-face seal manometric pressure allowed for SKA.2 pumps cannot exceed 2.5 MPa, for the remaining 1 to 4 stage pumps, manometric ...

Flow: 1,250 m³/h
Pressure: 10 bar
Head: 65 m

Self-Priming Centrifugal Pumps, with semi-open impeller, suitable for dirty or waste water applications. Solid passage size limit to 75mm (3 inches). The internal construction allows air to separate ...

Flow: 0 l/min - 1.7 l/min

... mA, or 0 to 10 V; --Pumping direction requires open collector or contact closure; --Start/stop/purge requires open collector or contact closure; --Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 ...

Flow: 19.44 m³/h - 1,267 m³/h
Head: 4 m - 33 m
Power: 15 kW - 200 kW

... The type with “L” is series of sump pump with extended shaft , which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard ...

Flow: 3 m³/h - 75 m³/h
Pressure: 6 bar
Head: 15 m - 50 m

DESIGN Single stage, vertical shaft processing pumps with open or vortex type impellers • The open impellers are connected to the shaft by a wedge. • The impellers are balanced according ...

Flow: 0 m³/h - 475 m³/h
Pressure: 5 bar
Power: 0.55 kW - 30 kW

... inlet to the pump, which ensures hassle-free operations under conditions in which many other pumps have problems with clogging. A submersible pump with a unique design Due to the ...

... materials from which the pump is made. The open impeller design allows liquids containing relatively high levels of impurities to be pumped without the risk of the impeller clogging. As a result of these ...

Flow: 0 m³/h - 25 m³/h
Pressure: 2.4 bar
Head: 0 m - 24 m

These centrifugal food grade pumps are highly efficient as they require a lower power consumption than other centrifugal pumps, the impeller used within these pumps is also highly efficient ...

Flow: 4 m³/h - 140 m³/h
Pressure: 4 bar - 48 bar

... viscosity continuous, gentle and low-pulsation flow précisé dosing flow in proportion to speed ADDITIONAL OPTIONS: • open hopper • feeder • explosion protection • clean-in-place • mobile platform • more... APPLICATION: • ...

Flow: 0 m³/h - 168 m³/h
Head: 0 m - 80 m
Input diameter: 100 mm

Hygienic centrifugal pump H1CP – single stage, non self-priming Reliable product feed in hygienic processes Easy and fast cleaning High surface quality due to parts made of solid material Robust mechanical ...

Flow: 0 m³/h - 550 m³/h
Head: 2 m - 40 m

... IE4 class efficiency Predisposition to VFD (variable frequency driver) Solids passage from 40 to 67 mm Impeller semi-open

Flow: 0.5 l/h - 500 l/h
Pressure: 24 bar

For pumping highly viscous products with a low degree of flowability. Open hopper pump with cylindrical/conical compression zone and auger feed screw Open aseptic fork joint made ...

Flow: 30,000 m³/h
Pressure: 2.5, 3.75 MPa
Fluid temperature: 105 °C

... ,it makes no vortex at inlet of pump.It adopts resin sand moulding and high quality cast technology to make the inner surface of pump casing and the surface of impeller smoother than ...