DN: 2 in - 48 in
... Through Conduit Gate valve Manufacturer: Full Port Slab Through Conduit Gate Valves, Resilient or Metal Seat, API 6D, API 6A, OS&Y, 2-48 Inch, Class 150-2500 LB. Med Slab Through Conduit ...
China MED Valve Co., Ltd.
DN: 10 mm - 125 mm
Pressure: 10 bar - 40 bar
... Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Flanges drilled acc.to DIN-UNI-ANSI norms Possibility of equipment with handlever, manual gear, pneumatic ...
THERMOMESS S.r.l.
DN: 0.125 in - 4 in
Pressure: 0 bar - 2,500 bar
Temperature: -250 °C - 450 °C
... Floating ball valves are the most common type of ball valve used to cut off flow in pipes. They are quarter-turn valves. The ball is perforated, so when the valve is ...
Redfluid SL
DN: 15 mm - 300 mm
Pressure: 1.6, 2.5, 4 MPa
Temperature: -29 °C - 180 °C
... The ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. The hard-sealed V-shaped ball valve has a strong connection between the ...
ChinaTanggong Valve Co., Ltd.
DN: 2 in
... This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems operation. The valve is appropriate ...
A.G.P. VALVULAS 10 SL
DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C
... Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual ...
DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C
... • wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 series 20, ISO ...
DN: 25 mm
Temperature: -20 °C - 60 °C
... Full bore ball valve for gas for riser pipe, with sealable cap, PE connection with fitting for protection steel pipe and solder connection. ...
Rubinetterie Bresciane
DN: 15 mm - 200 mm
Temperature: -20 °C - 185 °C
... JIS 10K 20K Temperature Range: - -20°C~185°C Ball valves shut off the flow of water using a ball, inside the valve. When in the "on" position, the opening is in line with the pipe, allowing ...
DN: 0.125 in - 0.31 in
... o-ring of Nitrile rubber with two supporting washers. -Upon order, we produce units with compression sealing end, flare(45°), hose nozzle, among others. -How & Where To Buy Swiss Replica Watches From Online Store? Here To Find More ...
Pressure: 7,500 psi
Temperature: -40 °F - 400 °F
... Easy to check the status of valve due to rising stem structure. Change stem packing without removal of bonnet. Field maintenance design allows checking the situation of internai parts by opening bonnet and changing valve’s ...
DN: 25 mm - 300 mm
... Dueker gate valves – for water and gas.Sophisticated technology. Fully-fledged gate valves. Dueker service connection valves are essentially the same as gate valves by Dueker. Just ...
Düker GmbH
DN: 0.5 in - 6 in
Pressure: 150 psi - 2,500 psi
Temperature: -20 °F - 1,000 °F
... lined pipe applications requiring flanged end connections. The internal design features are similar to the HI-100®. They include the in-line through ported venturi flow shape and the contained spherical ball. These basic features enable ...
DN: 20 mm - 63 mm
Pressure: 6 bar
Temperature: 65, 98 °C
... preferably with support pads to avoid bending and sagging of the pipe. When stacking pipes, make sure that the upper pipes will not cause squeezing, cracking or deformation damage to the ground pipes. ...
Huasheng Pipeline Technology Company
Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C
... RIEGER Double Seal Valves DD (DN 40-100) are used for the mix-proof barrier of product and cleaning medium in pipe sections. The leakage chamber is placed between the separating seals. The leakage is discharged via the ...
... T-smart shut-off valves are used for simple shut-off functions in pipe systems. T-smart shut-off valves have single-acting pneumatic actuators type NC (normally closed), alternatively type NO (normally ...
DN: 0.75 mm - 3.12 mm
... provides for good seat alignment and assures long seat life. ¼” F. NPT plugged boss on the downstream side of the valve body allows attachment of a hydrostatic relief valve or vent valve. “V”-ring ...
DN: 100 mm - 150 mm
Pressure: 10 bar
... bottom ball valve is a floating version with a ball-seat made of KFGN (KLINGER Flon glass fibre nitrogen sintered) spring-loaded on one side. The tank connection is according to DIN 28117 and the pipe connection with ...
DN: 14 mm - 36 mm
Pressure: 63, 40 bar
... INTRODUCTION BALL VALVE FOR ERMETO CONNECTION 932 932.0 With our new 932 there will be added a new type of connection to our product portfolio. The 932 is a ball valve with a connection for a metalic cutting ring fitting, ...
DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C
... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC 782 is ...
DN: 0 mm - 1,270 mm
... diameter pipes For mounting on shot-blast cabinets to ensure no dust escapes to atmosphere when glanding on tubes Will create a seal around pipes up to 75% of the valve bore diameter Will ...
DN: 6.35 mm - 50.8 mm
... The Econ® 2WE20/5WE20 NPT Series is a premium three piece, full port ball valve with NPT ends and an ISO 5211 compliant direct mount actuation pad. The 2WE20 is rated to 2000 WOG in sizes ranging from ...
Econ Brand Valves
... High Pressure Releasing Valve Reasonable structure Stable performance Easy maintenance Energy-efficiency High pressure releasing valve is used in the large-caliber pipes for low pressure fluid ...
Qingdao ZRT Software & Control Technology Company
DN: 15 mm - 50 mm
... HO-Matic pinch valve series 88 "Tri-Clamp" (DIN32676, series A) Our universal construction kit with a variety of connections combines the latest technology with the best user-friendliness. Tri-clamp, milk pipe thread, ...
DN: 25 mm - 100 mm
Pressure: 150, 55 bar
Temperature: -10 °C - 25 °C
... high-pressure valve – up to 150 bar – with 3A certification Simplified maintenance for significant time savings and increased efficiency Modular and flexible: conversion to aseptic with steam barrier (BBYQ) with no changes in dimensions Sturdiness: ...
the best suppliers