Pipe valves

120 companies | 300 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
pinch valve
pinch valve
1213-3 series

DN: 1.5 mm
Pressure: -70,000 Pa - 2,000,000 Pa

... The 1213 series solenoid valve is a dual-channel pinch valve offering high performance, low cost, and maintenance-free operation. With its life span over 2 million cycles, it ensures reliable control of flow paths for ...

See the other products
Keyto Fluid Technology
globe valve
globe valve
21.010.726

DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C

... industrial applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an additional back flow preventer to ...

pressure-control valve
pressure-control valve
11120 series

... excessive pressure. It 'necessary to apply these valves when the elements to be lubricated are enclosed in tight enclosures or protected by a ring gasket. When the pressure calibration of valve is gone over, the ...

ball valve
ball valve
SKV

DN: 25 mm - 500 mm
Pressure: 10 bar - 50 bar

... full-bore ball valves are mainly intended for use as manually operated valves or remotely actuated on/off valves. The ball valve meets ISO standards. The valve is available ...

See the other products
SOMAS
globe valve
globe valve
5525/5535 series

DN: 15 mm - 50 mm

... Combination valve and flow control instrument with special micrometer and pointer to set valve within 1/100 of a handwheel turn. • Boilers, compressors, steam condensers, pumps, steam lines, feed water regulator bypass ...

butterfly valve
butterfly valve
UP.83.ZP.EP

DN: 50 mm - 300 mm
Pressure: 6, 10 bar
Temperature: 10 °C - 60 °C

... • Ideally suited for flow control using minimal piping space. • 100% factory tested. • Minimal pressure drop. • Low maintenance. • Resistance to many inorganic chemicals. • Regulable opening every 15º with position holding. • Good ...

See the other products
Cepex SER
pressure-control valve
pressure-control valve
O

... pressure inside the pipes. - Actuator allocation with adjustment to product pressure - External air connection as a standard to open the valve during cleaning - Internal air flow with the use of a control ...

See the other products
Evoguard GmbH
ball valve
ball valve
YDF

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 250 °C

... strictly prohibited from entering the valve. 4. It is strictly forbidden to Weld flanges after installing valves in order to avoid damaging valve sealing rings. The valve installation ...

ball valve
ball valve
620 series

DN: 0.5 in - 2 in
Pressure: 5 bar
Temperature: -5 °C - 60 °C

... series, which are manufactured by Sferaco, are heavy-type gas ball valves constructed out of brass. It is used together with a steel pipe, but it can also be used with a copper pipe if the pipe ...

needle valve
needle valve
J24SB series

DN: 0 mm - 6 mm

... of flow in pressure regulators, control equipment or piping systems.

Overall dimensions / Configurations
Straight configuration: needle valve J21S
Angle configuration: needle valve ...

gate valve
gate valve
GVMS

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

See the other products
DI NICOLA INFINAM
shut-off valve
shut-off valve
DP-D-003-00000 series

DN: 0.5, 0.25 in
Pressure: 500 bar

... Shut-off valve for manual shut-off of the material line. Type: KH HD Ball cock high pressure FP001, FP015, FP045, FP045-T, FP050, FP050-T, FP200, FP200-T, FP200-S Technical Data Connection thread G 1/4" or G 1/2" ...

See the other products
Dosier- und Prüftechnik GmbH
gate valve
gate valve
4027E3

DN: 80 mm - 300 mm
Pressure: 16 bar

... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...

See the other products
Hawle
floating ball valve
floating ball valve
525 series

DN: 0.5, 0.75, 1 in
Pressure: 0.5 bar - 12 bar
Temperature: 0 °C - 80 °C

... GLOBUS Quick-fit ball float valve made of pressed brass, complete with inlet pipe and quick-fit connection. The chemical nickel plating of the components provides corrosion protection for all valves. The ...

ball valve
ball valve

DN: 2 in - 40 in

... optional double piston sealing. Special seat compounds are also available. - Each valve meets API-6D, API 6FA and Nace requirements. - Optional stem extensions, actuators, pipe pups and specialized coatings. ...

See the other products
Athena Engineering S.r.l.
double block-and-bleed valve
double block-and-bleed valve
D3B

DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C

... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...

control valve
control valve
MX

DN: 0.5 in - 12 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 425 °C

... B16.34 Valve body material: WB36/A105/F22 Flow characteristics: L Leakage level: MSS-SP61 Product Features 1. - Multi-stage pressure réduction structure principle effectively avoids cavitation and prolongs service life. 2. - ...

See the other products
Suzhou Delan Energy Science & Technology Co.,Ltd
needle valve
needle valve
0800140 series

DN: 0.75, 0.5 in
Pressure: 6 bar
Temperature: 0 °C - 80 °C

... Connectivity standard External thread GAS cylindrical ISO 228/1 Connectivity standard Bucchi srl for pipe fittings adopts as standard connection ISO 228/1; in order to improve hydraulic seal has decided to create its own internal ...

See the other products
Bucchi S.r.l.
gate valve
gate valve

DN: 50 mm - 300 mm
Pressure: 10, 16 bar

... Spigot ends Coupling for spigot ends pipe DN: 50-300 PN: 10/16 Body: GGG-50 Wedge: EPDM/NBR Bonnet: GGG-50 Stem: AISI-420 ...

See the other products
Belgicast
gate valve
gate valve
125HT

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

... Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series ...

See the other products
MARAN E PERACINI
diaphragm valve
diaphragm valve
GIPS

DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C

... The series GIPS-FC security shut-off valves are installed in pressure regulating or metering skid units in order to protect the pipe lines or the gas equipments and all downstream instruments from an unexpected over pressure ...

ball valve
ball valve
5227 series

DN: 20 mm - 63 mm
Pressure: 10 bar

... Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems ...

needle valve
needle valve
ZWD1

Pressure: 16, 25 bar
Temperature: -196 °C - 400 °C

... Throttle valves are used in measuring systems, heating equipment and industrial automation. They enable pressure throttling, flow rate regulation and total medium cut-off. Throttle valves are used in measuring systems, ...

shut-off valve
shut-off valve
AGD-1D

Pressure: 29 bar
Flow rate: 12 ft³/min

... Shut off valve for individual control Easy connection to air hose ...

ball valve
ball valve
501 52 0000 02

DN: 0.5 in - 2 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 100 °C

... stainless steel pipes 304/1.4301 diameters 18mm to 108mm are compatible with other fittings 18mm to 108mm in material 304/1.4301, 316/1.4401 or 316L/1.4404. AQUApipe press fittings 304/1.4301 diameters 18mm to 108mm are compatible ...

See the other products
Airpipe Europe
ball valve
ball valve
BK1

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, BS, ASTM, JIS), threaded sockets (BSPP ...

cryogenic valve
cryogenic valve
1200 UNIVERS kryogen

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...

See the other products
STÖHR ARMATUREN GmbH & Co KG
pipe valve
pipe valve

DN: 110 mm - 400 mm

... HOKA PVC slot valve, round version, for assembly on air ducts to regulate volume flows at suction points. slot valve is mounted on the pipe ends or rectangular ducts through hot gas welding. Diameter ...

lug type valve
lug type valve
201473 W series

DN: 32 mm - 600 mm
Pressure: 10 bar

... SIGEVAL LUG BUTTERFLY VALVE WITH CAST IRON BODY AND DISC, EPDM SEAT - MANUAL HANDLE LUG type butterfly valve - ACS certified (potable water) - Body in GG25 epoxy coated - Disc in GGG40 epoxy coated - Stainless steel shaft ...

ball valve
ball valve

... the NFG fully welded ball valves, with the simplest installation procedure deriving from the presence of the built-in PE ends. Additional pluses of such valve are the compact dimensions and the possibility to enrich the ...

gate valve
gate valve
F4

... Valves with a shut-off arrangement in the form of a curtain by means of a slide and connected to pipelines to stop the fluid in the pipe. Thanks to the screw shaft mounted inside the body, the valve ...

outlet valve
outlet valve
89.886 series

DN: 20, 25 mm
Pressure: 16 bar

See the other products
EQOfluids FR
ball valve
ball valve
385 00 series

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C

... made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water full bore female pipe thread removable inner top part TOP-ENTRY, with EPDM gasket body and gunmetal ball operating ...

See the other products
Kemper Olpe GmbH
pipe valve
pipe valve
NF series

DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 200, 350, 450 °F

... standard for on-off service and insure long life on valve seats. Regulating tip stems are available for all valves at no additional cost. Materials include high tensile Type 316 stainless steel for valve ...

disc bottom valve
disc bottom valve
FV

... Foot valve is virtual secondary suction valve placed at the bottom or foot of the suction pipe. Foot valve has function of check valve that make sure that the pump is ...

shut-off valve
shut-off valve
AB 16 S Series

DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C

... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve ...

ball valve
ball valve
6594 series

DN: 25, 40, 50 mm
Temperature: -20 °C - 60 °C

... Reduced bore gas ball valve for riser pipe, with sealable cap, female threaded and PE connection, with fitting for protective steel pipe. ...

ball valve
ball valve
VSF

DN: 6 in - 36 in

... The ESDV provides minimal pressure Differential when Differential when the valve the valve is in full-open-open position. The full bore ball valve virtually acts like a pipe minimizing ...

See the other products
pneumaticairactuator.com
ball valve
ball valve
91BY series

DN: 15 mm - 25 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 130 °C

... Valve for HVAC Terminal Units Mounting Additional information Material - DZR Brass Typology - Ball valve Connection - ISO 228/1, ISO 7/1 Valve for HVAC terminal units mounting (fan ...

See the other products
VIR
gate valve
gate valve

DN: 2 in - 48 in

... Through Conduit Gate valve Manufacturer: Full Port Slab Through Conduit Gate Valves, Resilient or Metal Seat, API 6D, API 6A, OS&Y, 2-48 Inch, Class 150-2500 LB. Med Slab Through Conduit ...

See the other products
China MED Valve Co., Ltd.
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
DirectIndustry RFQ: Free quotation comparison tool
Receive and compare quotations for free
Describe your project
We select
the best suppliers
Compare quotations and complete your purchase