- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Plastic pipe
Plastic pipes
Inner diameter: 0.5 mm - 27 mm
Temperature: -30 °C - 105 °C
Working temperature:-30°C~+105°C STRUCTURE PVC tubing is produced with superior and environmentally friendly polyvinyl colloidal particle, after drying, extruded to tubing when heated up and liquated, then ...
Shenzhen Sunbow Insulation Materials MFG. CO., Ltd
Inner diameter: 1 in - 2 in
Temperature: 60 °C
Low vacuum rated to 5x10-3 Torr ISO compatible design Corrosion resistant material Applications include extended length roughing lines and mechanical pump venting Conforms to ASTM D-1785, Type 1 Refer to table for ...
Outer diameter: 0.75 in - 3 in
Pressure: 0 Pa - 1,206,582.526 Pa
... the art additives. TYCO CPVC Pipe and Fittings are easier to install than traditional steel pipe systems, and at the same time, provide superior heat resistance and strength as compared to traditional ...
Inner diameter: 100 mm - 600 mm
Outer diameter: 118 mm - 700 mm
Ridgidrain Plain Ended Pipes are available in diameters from 100-900mm. They are approved by the BBA, BBA HAPAS and Network Rail. Unperforated (U), half perforated (HP) and fully perforated (P) options are available. ...
POLYPIPE
Inner diameter: 2.5, 4, 5, 6.5, 8 mm
Polyurethane Anti-Static Tube Hardness: 95A-98A Fluid: Air Environment and fluid temperature: -20℃~+80℃ Available by the meter or in 100 meter coils. It meets perfectly the requirements of electronic environments ...
XHnotion
Steel Pipes of Complex Plastic (Steel Pipes of Lining Plastic) 1、 Carried Standard: GB/T28897-2012 2、 Application: Delivery of household water, cold/hot water, ...
Inner diameter: 4 mm - 12 mm
Outer diameter: 2.5 mm - 9 mm
Pressure: 50 psi - 200 psi
Polyethylene is the most commonly used tubing due to its flexibility, wide range of chemical resistance and lower cost. Nycoil uses high quality Linear Low Density Polyethylene material (LLDPE). LLDPE has a much higher resistance to ...
Nycoil
Inner diameter: 16 mm - 500 mm
Pressure: 6, 10, 12.5, 16, 20 bar
Atoxic UPVC pipes for the construction of pipeline systems for fluids under pressure both for underground and above ground application. The different types of connection are: pre-inserted rubber ring ...
LARETER SpA
Temperature: -50 °C - 260 °C
Hose in Fluoride derivative by PTFE (Teflon) with a corrugated outer braid wire of stainless steel AISI 304 Maximum working temperature -50 ° + 260 ° C max Resistance to pressure as a function of the number of braids ...
Inner diameter: 10, 20, 18 mm
Outer diameter: 15, 24 mm
Temperature: -20 °C - 100 °C
... Rigid tube made out of special polyester food-grade wall, according to FDA and EU regulations, free of bisphenol A and phthalate. Applications : Very good resistance to shocks, to highly graded alcohol, wide resistance ...
... in Germany on the role of CAST IRON and PLASTIC PIPES against fire insulation to other floors through waste water pipe lines in buildings. With reference to fire insulation to other ...
Inner diameter: 10, 8, 6, 4, 2 mm
Temperature: -60 °C - 80 °C
Delivered length: 100 mm - 50,000 mm
Tailored tubes in custom lengths for lubrication systems and general use Tailored SKF plastic tubes are configurable tubes in custom lengths optionally available prefilled ...
Inner diameter: 0.25 mm - 25 mm
Outer diameter: 4 mm - 16 mm
Pressure: 15 bar - 60 bar
PTFE smooth pipe - Teflon Welding Pipe. Manufacture of PTFE pipe, Supply of all types of hoses and teflon pipes in thin walls up to 2mm., With internal diameters from ...
Sampling Systems can offer a contract tube manufacturing service as part of our SteriWare range. All the tube is manufactured under class 10,000 cleanroom conditions which means it is ideal for pharmaceutical ...
Corrugated plastic pipe for the installation of the temperature sensor diameter 16mm
... Polyethylene dredging pipe (HDPE Pipe) is one of the latest applications of polyethylene pipes. HDPE Pipes are manufactured and welded with two HDPE flange adapter and ...
Inner diameter: 1 mm - 6 mm
Outer diameter: 32.8 mm - 60.1 mm
... provided to avoid the loosening of coupler during the removal of pipes. A special polymer is injected into the threads via the coupler. The polymer forms a permanent bond between the ...
Inner diameter: 2.1 mm - 4.8 mm
Temperature: 85 °C - 300 °C
... tensile strength. The tube construction incorporates stainless steel components to provide improved corrosion resistance and an optional outer polymer jacket is also available upon request. Typical applications ...
Inner diameter: 14, 9.1, 4.6 mm
Pressure: 20, 15, 10 bar
The PFA Flow Tubes are available for the following models: Click Housing, Tubeholder, Clamp, and Clip Mounting. Characteristics High chemical resistance Wetted parts: PFA and ruby Available per 10-pack
Inner diameter: 4.6 mm - 25.4 mm
Pressure: 25, 10, 20 bar
The PVDF Flow Tubes are available for the following models: Tubeholder, Clamp, and Clip Mounting. Characteristics Can be exposed to gamma irradation up to 50 kGy Wetted parts: PVDF and ruby Available per 10-pack
... heat zones along the extrusion tube and a special temperature profile ensure that the PTFE rod is sintered through fully. The design is generally subject to the shape of the extrusion cylinder. For example, ...
... inertness. Several colours are possible : natural, black, brown,, red, orange, yellow, blue, violet, grey white or bicolour. The tubes are reeled on spools. Axon' also offers thermoretractable PTFE tubings. Miniature ...
... Tubing is usually calling PTFE Pipe or PTFE Hose. PTFE Tubes are made of good quality PTFE,has best corrosion resistant and dielectricity. Description: PTFE Tubing is usually calling PTFE Pipe ...
Inner diameter: 16 mm - 63 mm
Outer diameter: 20 mm - 72 mm
Pressure: 4 bar
TURBO MULTILAYER PIPE PE-RT multilayer pipe in bars, length 4 m.
Inner diameter: 32 mm
Delivered length: 1 m - 2 m
... glue is required for mounting. This makes for a sturdy and slim well pipe. The PVC pipe comes in different variations: Filter pipe PVC pipe ...
Inner diameter: 8, 10 cm
Delivered length: 150, 200 cm
Cast iron pipes for descending gutters, terminal element, different lengths and sizes. Downpipe or gutter or descending pipe in cast iron with wall anchors. Used to drain roof water and protect the end ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining