Poppet check valves

DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 60 °C

EFFAST CV valve is a PVC-U spring check valve ideal for use in applications that require precise closure and noiseless movement. CV check valve is suitable ...

Pressure: 0 psi - 600 psi
Temperature: -196 °C - 65 °C

... Entry: This union bonnet valve can be permanently installed in the line and services from the top Construction: Designed to prevent back flow in cryogenic systems. Higher fluid capacity (CV) than poppet ...

Pressure: 414 bar
Temperature: -184 °C - 232 °C

... specialty valves handle a wide variety of applications. Features and Benefits: Flexible Seal Seat™ for zero leak (bubble-tight) sealing to 6000 PSI O-Ring seal positively secured Non-pressurized threads ...

DN: 0.125 in
Pressure: 207 bar
Temperature: -23 °C - 190 °C

316 SS, CV Series Check Valve, 1/8" Tube Fitting, Fluorocarbon FKM O-Ring, 3000psig(207bar), -10°F to 375°F(-23°C to 190°C), Fixed Cracking Pressure 1/3psig(0.02bar) Body Material316 Stainless Steel Port ...

DN: 6.35, 9.525 mm
Pressure: 0 bar - 5 bar
Temperature: -20 °C - 80 °C

UNIDIRECTIONAL VALVE VUC, POPPET TYPE CHECK VALVE INSERT TYPE POPPET SEALED The unidirectional insert valves VUC allow the free ...

Pressure: 250 bar
Temperature: -40 °C - 120 °C
Flow rate: 19 l/min

... design Operation Pressure at ① overcomes the spring-bias poppet and allows free flow ① to ②.Flow in the opposite direction,from ② to ①, is blocked by the poppet.

DN: 15 mm - 50 mm

... structure of a Pennant lift check valve is similar to the globe valve without the handwheel and any parts which relate to the manual operation. The valves ...

DN: 12.7 mm
Pressure: 420 bar
Temperature: -30 °C - 110 °C

... screw-in, cartridge style, direct acting, poppet type check valve. Main use is as a blocking or load-holding device. The CVC5.S08 allows flow passage from port 1 to 2: the cartridge ...

DN: 0.25, 0.375, 1, 0.5, 0.75 in
Pressure: 0 psi - 100,000 psi
Temperature: -251 °C - 648 °C

... MR-01-75 Materials 316 cold worked stainless steel is standard PEEK 450G is the standard material of soft seat poppet seal

DN: 0.125 in - 1 in
Pressure: 3,000 psi
Temperature: -56 °C - 204 °C

... valve and stainless steel check valve configuration. Valve Check also manufactures many custom check valves, relief valves, ...

DN: 10 mm - 50 mm
Pressure: 0 bar - 160 bar
Temperature: 0 °C - 550 °C

Standard features Straight bonnet Die-forged valve body and bonnet Shut-off disc, Fig. No. 200 AE Throttle disc, Fig. No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure ...

Pressure: 0 Pa - 31,500,000 Pa

... with a control valve and are positioned between the base-plate and the control valve. Valve interfaces are sealed with O-rings which are included in the valve pack. ...

Pressure: 0 bar - 30 bar
Temperature: 0 °C - 151 °C

... pressure to open the valve i.e. the inlet pressure, generated by the fluid, exceeds the load of the spring aids in shutter lift and the valve is opened. The differential pressure across ...

DN: 2 in - 16 in
Pressure: 0 psi - 400 psi
Temperature: 0 °C - 80 °C

Pressure Max: 400 PSI: 2"-12", 300 PSI: 14"-16" Temp Max: 180°F (80°C) Cast iron body with epoxy coating. Flanged connection ANSI B126.1, class 250. Metal to metal seating with stainless steel spring. Note: Viton seal 2-12, 14-16 NITRILE ...

Pressure: 350 bar

This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.

Pressure: 0.5 psi - 125 psi
Temperature: 0 °F - 225 °F

Check valve (one way valve) allows flow in one direction only. Internal seal checks reverse flow. Used in applications where back flow is not permitted, or must be redirected. ...

DN: 8 mm - 25 mm
Pressure: 100 bar
Temperature: -50 °C - 200 °C

Engelsberg BAS 435 Y-Type Globe Check Valve Globe style check valve in Y-type design used for liquid and gas flow. They are available in soft or metal seated disk ...

DN: 16 mm - 63 mm
Pressure: 420 bar

... Cartridges Valves Series CSE are passive slip-in cartridge valves similar to our CEE series, but here we have cartridge valve and cover in one valve unit. They are equipped ...

DN: 0.25 in - 1.25 in
Pressure: 0 psi - 5,000 psi
Temperature: -40 °F - 250 °F

Parker check valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. DT Series Check Valves ...

DN: 15 mm - 350 mm
Pressure: 16 bar
Temperature: -10 °C - 350 °C

Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free. Benefits Check disc and closing springs made of stainless ...

DN: 15 mm - 350 mm
Pressure: 16 bar
Temperature: -10 °C - 350 °C

Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free. Benefits Check disc and closing springs made of stainless ...

Pressure: 0.5 bar - 16 bar
Temperature: -20 °C - 120 °C

... Input: Whitworth pipe thread exterior - Output: Whitworth pipe thread interior - Sealing FPM - Material 1.4404 - Type: Poppet valve, FPM seals on metal - Allowable medium: Air/Liquids - Temperature ...

DN: 1 in - 4 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 130 °C

These AWH non-return valves are engineered for use in pipe lines, systems and machines in the food and drink industry. Suitable for liquid products, additives and cleaning liquids. These valves prevent ...

Pressure: 400, 250, 160, 100 bar

RHZ-M-ED Check Valves RHZ06ZLMEDA3C RHZ08ZLMEDA3C RHZ10ZLMEDA3C RHZ12ZLMEDA3C RHZ15ZLMEDA3C RHZ18ZLMEDA3C RHZ22ZLMEDA3C RHZ28ZLMEDA3C RHZ35ZLMEDA3C RHZ42ZLMEDA3C RHZ06ZLMEDA3C RHZ08ZLMEDA3C RHZ10ZLMEDA3C RHZ12ZLMEDA3C RHZ14ZLMEDA3C RHZ16ZLMEDA3C RHZ20ZLMEDA3C ...