Pressure: 300 psi
Flow: 0 ft³/min - 15 ft³/min
Orifice diameter: 0.13 in - 0.25 in
... 14R non-modular mini regulators provide a convenient and low cost method to reduce a supplied air pressure to desired outlet pressure. 14R provides quick and accurate pressure regulation ...
Watts Fluid Air
Pressure: 413 bar - 1,034 bar
Orifice diameter: 0.25, 0.5, 0.38 in
Temperature: -26 °C - 73 °C
... use in R & D labs, pressure filling, calibration testing, burst testers, component testing and high pressure hydraulic or pneumatic applications. Specifications Pressure Rating -Maximum Inlet Pressure ...
Emerson Automation Solutions - TESCOM
Pressure: 1.5 bar - 50 bar
Flow: 0.2 m³/h - 30 m³/h
Orifice diameter: 0.13 in
... Key advantages - This single stage regulator is based on the Cartridge seat Technology - Compact, ergonomic and lightweight design - Accurate pressure control for reliable service - Handwheel in compliance ...
Rotarex
Pressure: 0 bar - 8 bar
Flow: 4 l/min - 1,200 l/min
Orifice diameter: 0.25, 0.125 in
... the low pressure electronically controlled pressure regulator is used in combination with: - Air pressure ratio regulator: Amplifies output pressure in ratio with the ...
KaoLu
Pressure: 0 bar - 10 bar
Flow: 0 l/min - 120 l/min
Orifice diameter: 1 mm
... Compact - High Precision - High Sensitivity - Wide Pressure Range - Applications: - Leak Testing At Low Pressure - Microfluidics Flow Control - Dispensing - Multi-Stage Pressure ...
KaoLu
Pressure: 20, 50, 30 bar
Flow: 11 m³/h
Orifice diameter: 0.5, 0.375 in
... electronic pressure regulators. It consists of proportional solenoid, pressure transducer, intelligent electronics, and a refined spool. Resolution of 0.05% F.S and starting pressure ...
KaoLu
Pressure: 207 bar
Temperature: -40 °C - 60 °C
... li>Maximum inlet pressure: 3000 psig / 207 bar
Jewellok
Pressure: 600 psi
... JR1300 Series Single Stage Regulator
Low to intermediate flow.
Features
- Body material: SS 316L, SS 316L VAR.
- Metal-to-metal diaphragm sealing.
- Internal electrolytic polishing, with a
Jewellok
Pressure: 0 bar - 300 bar
Orifice diameter: 1.1 mm - 2.4 mm
Temperature: -30 °C - 74 °C
...
Technical Data
- Type: single-stage
- Inlet pressure P1:
Jewellok
Pressure: 0 bar - 85.3 bar
Flow: 0 l/min - 50 l/min
Temperature: 50 °C
BEZARES S.A.
Pressure: 0 psi - 42 psi
Temperature: 50 °C
BEZARES S.A.
Flow: 0 l/min - 50 l/min
Temperature: 50 °C
BEZARES S.A.
Pressure: 0.5 bar - 30 bar
Flow: 15 m³/h
Orifice diameter: 50 mm
... dome-loaded pressure regulator set. For high and varying flows requiring maximum pressure stability. Features: Pilot Control Tube (PCT) One of the features enabling highly accurate control ...
WITT-Gasetechnik
Pressure: 0.5 bar - 30 bar
Flow: 15 m³/h
Orifice diameter: 2 in
... of WITT dome pressure regulators is the result of a complex technology consisting of perfectly matched components: • - Pilot Control Tube (PCT): One of the features enabling highly accurate control of ...
WITT-Gasetechnik
Pressure: -500 bar - 10,000 bar
Orifice diameter: 0 mm - 600 mm
... dome-
pressure-
regulators/coldstop-smart/
Key features
- Pilot-operated dome regulator designed for precise pressure control at points
WITT-Gasetechnik
Pressure: 0 bar - 12 bar
Flow: 850 l/min - 4,600 l/min
Orifice diameter: 0.125 in
... Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ ...
Pressure: 0 bar - 16 bar
Flow: 2,000, 6,000 l/min
Orifice diameter: 0.5, 0.25 in
... Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ ...
Pressure: 25 bar
Flow: 320 l/min
... Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ ...
Pressure: 0 psi - 400 psi
Orifice diameter: 1.27 mm
... This is a single stage regulator, and is ideal for applications with steady inlet pressures up to a maximum of 500 psig. Outlet Pressure Range: Maximum outlet range 0-400 psi. Piston style regulators ...
Beswick Engineering Co, Inc.
Pressure: 0 psi - 50 psi
Orifice diameter: 0.89 mm
... PRDB series regulator features an improved valve design compared to the PRD series regulators. This allows for improved seal reliability and precision at very low outlet pressures, pressure ...
Beswick Engineering Co, Inc.
Pressure: 0 psi - 30 psi
Orifice diameter: 0.89 mm
... family of regulators, featuring larger 10-32 threaded inlet and outlet ports, and an improved valve design. Max Inlet Pressure Rating: This is a two stage regulator, and is ideal for applications with ...
Beswick Engineering Co, Inc.
Pressure: 1 bar - 13 bar
Orifice diameter: 0.5 in - 6 in
Temperature: -15 °C - 180 °C
... equipments from overload pressure, maintaining consistant and precise pressure to optimize system and equipments. Wide range of application, easy maintenance and precise pressure control ...
Elite Line Industrial Corp.
Pressure: 1 bar - 13 bar
Orifice diameter: 0.5 in - 6 in
Temperature: -15 °C - 180 °C
... . Definition of a Pressure Sustaining Regulator Valve Pressure Sustaining Regulator Valve, also known as a Back Pressure Valve, is a device that maintains a defined ...
Elite Line Industrial Corp.
Pressure: 0.2 bar - 1.5 bar
Orifice diameter: 0.5 in - 2 in
Temperature: -15 °C - 80 °C
... Low Pressure Type Pressure Reducing Valve function as pressure reducing valve but giving lower pressure adjusting range. Manufactured in Stainless Steel body, with precise pressure ...
Elite Line Industrial Corp.
Pressure: 0 bar - 10 bar
Flow: 4.4 l/min
Orifice diameter: 0.125 in
... within 0,2% Air consumption of 4,4 l/min (ANR) @ 1 bar More precise pressure regulation The precision regulator is characterized by a high precision and stability of the pressure adjusted thanks ...
A&T Fluid solutions
Pressure: 0 bar - 12 bar
Flow: 900 l/min
Temperature: -5 °C - 50 °C
... valve to grant pressure stability Airwork microregulator DT series, is particularly suitable for panel mounting or in all applications where it is necessary to reduce the overall dimensions to a minimum. The pressure ...
A&T Fluid solutions
Pressure: 0 bar - 15 bar
Flow: 600 l/min
Temperature: -10 °C - 50 °C
... The XRO series is a series of pneumatic pressure regulators manufactured by Airwork Pneumatic Equipment. Utilizing an air fluid, it features the ability to deliver a maximum pressure of 15 bar at a temperature ...
A&T Fluid solutions
Pressure: 0.2 MPa - 0.6 MPa
Orifice diameter: 4 mm - 10 mm
Temperature: 0 °C - 60 °C
... offers new pressure reducing valve. The pressure setting is factory set and cannot be changed or adjusted, which provides operators safe and continuous performance. The pre-set regulator provides a stable ...
Pressure: 25, 10 bar
Temperature: -40 °C - 85 °C
Flow: 1 m³/h - 50 m³/h
... Special Argon Pressure Regulator The pressure regulator can be tightened by hand without the need for a spanner. It reduces the stored bottle pressure from max. 200bar (on request 300bar) ...
Pressure: 20 psi - 500 psi
Orifice diameter: 0.25 in
Temperature: -60 °C - 150 °C
... Technical Data For using gas and liquid Inlet pressure: 600, 3500Psig maximum Adjustable outlet pressure in ranges: 20, 50, 100, 150, 250, 500Psig Operating temperature: -60 to 150℃ Diaphragm material: 316L stainless ...
Golden Mountain Enterprise
Pressure: 1.96 bar - 245.17 bar
Temperature: 80 °C
... spring-loaded piston and adjusting nut as well as o-ring to protecting gauges. The protector closed at a set point pressure when over pressure flow in to gauges. Technical Data Range: 2~250 kg/cm2 Connection Size: ...
Golden Mountain Enterprise
Pressure: 150, 500, 250 psi
Orifice diameter: 0.5 in
Temperature: -60 °C - 150 °C
... Technical Data For using gas and liquid Inlet pressure: 600, 3500Psig maximum Adjustable outlet pressure in ranges: 150, 250, 500Psig Operating temperature: -60 to 150℃ Diaphragm material: 316L stainless steel, and Hastelloy ...
Golden Mountain Enterprise
Pressure: 0.1 bar - 7 bar
Temperature: 0 °C - 110 °C
... Precision Diaphragm Regulators: When Clippard invented miniature regulators in 1962, the MAR Series became very popular as a simple, robust, and cost-effective regulator in a small package with exceptionally ...
Pressure: 10 psi - 300 psi
Flow: 85, 140 l/min
Orifice diameter: 0.13 in
... Clippards Regulators are offered in two versions, relieving and non-relieving. The relieving regulator will maintain a constant pressure output even if there is a change in the downstream condition. The ...
Pressure: 7 psi - 125 psi
Flow: 113 l/min
... The MMR-1N maximatic regulator by Clippard gives accurate regulation of the air varying from 7 to 125 psig while regulating range ranges from 7 to 100 psig for the MMR-1N whereas 7 to 125 psig for the rest. For adjusting the pressure ...
Pressure: 0 bar - 400 bar
... Applications •Gas and liquid chromatography •Fermenter pressure control (Biotechnology) •Vapour pressure control in MOCVD processes (bubbler systems) •Protective gas pressure ...
Bronkhorst
Pressure: 1.28 bar - 64 bar
Orifice diameter: 0.25 in
... Bronkhorst® EL-PRESS Metal Sealed Pressure Meters and Controllers are characterised by their unique, patented metal-to-metal seal construction with excellent resealing capability. Furthermore they distinguish themselves by a high surface ...
Bronkhorst
Pressure: 0.7 mbar - 400,000 mbar
Flow: 0.1 l/min - 100 l/min
Orifice diameter: 0.01 mm - 2 mm
... Applications •Process pressure control in food, pharma and (petro-)chemical installations •Fermenter pressure control (Biotechnology) •Fuel Cell technology •Protective gas pressure ...
Bronkhorst
Pressure: 0.5 psi - 10 psi
Orifice diameter: 0.125 in - 0.31 in
... Subminiature Relieving Regulator is configured for accurate pressure regulation with minimal consumption. It will only relieve pressure after the output has risen above the setpoint. This feature prevents ...
AIR Logic
Pressure: 0.5 psi - 30 psi
Orifice diameter: 0.125 in - 0.25 in
... Subminiature Relieving Regulator is configured for accurate pressure regulation with minimal consumption. It will only relieve pressure after the output has risen above the setpoint. This feature prevents ...
AIR Logic
Pressure: 0.5 psi - 60 psi
Orifice diameter: 0.125 in - 0.31 in
... Subminiature Relieving Regulator is configured for accurate pressure regulation with minimal consumption. It will only relieve pressure after the output has risen above the setpoint. This feature prevents ...
AIR Logic
Pressure: 0 bar - 10 bar
Flow: 300 l/min - 5,000 l/min
... • Adjustment hand grip with locking device • Max. inlet pressure 12 bars • Adjustment field: from 0 to 10 bars • Flow:1.700 Nl/min 6 bars ...
Pressure: -1 bar - 0.5 bar
Flow: 0 l/min - 20 l/min
... Closed loop vacuum or pressure regulator with flow indication and programmable PID parameters. Instrumentation Dental Respiratory Semiconductors Automation Specifications Control type 0 ...
Pressure: 0 bar - 10 bar
Flow: 1.6 l/min - 4 l/min
... wide operating pressure range for precise droplet size generation. String of up to 100 valves, each independent. Dairy & Food Agriculture Industrial Chemistry Specifications Regulator type PWM or ...
Pressure: 0 bar - 7 bar
... Instrumentation Industrial Automation Specifications Regulator type Closed loop piston regulator Control type 0 - 5 V Resolution 11 bit ...
Pressure: 0 bar - 15 bar
Orifice diameter: 0.25, 0.375, 0.5, 0.75, 1 in
Temperature: -10 °C - 60 °C
... Any Set Pressure Diaphragm operated, Self relieving type - Pressure Compensated By Balanced Poppet Good Flow And Reguldting Chdracteristics Pressure Setting & Pull the knob and adjust by turning ...
UFLOW AUTOMATION
Pressure: 0 bar - 200 bar
Flow: 40 m³/h
Orifice diameter: 0.25 in
... > - Safety Valve Cracking Pressure: 30 Bar (Adjustable) Features Metal diaphragm maintain consistent pressure regulation, offering précisé control over system pressures. Versatile ...
UFLOW AUTOMATION
Pressure: 0 bar - 400 bar
Flow: 40 m³/h
Orifice diameter: 0.25 in
... Regulated Pressure: 0 to 25 Bar Safety Valve Cracking Pressure: 30 Bar (Adjustable) Features Metal diaphragm maintain consistent pressure regulation, offering précisé control over ...
UFLOW AUTOMATION
Pressure: 8 bar
Flow: 150 l/min - 500 l/min
... downstream pressure is maintained with precision. The regulator has a functional design that allows for reliability and good overall performance. Thus, integration into any pneumatic system is easy. With serial RS-232, ...
MATRIX mechatronics
Pressure: 1 bar - 8 bar
Flow: 12,000 l/min
... The SPR 600 is an electronically-controlled pressure regulator equipped with an 8-bit microcontroller in combination with a 1" or 3/4" pilot-assisted pressure regulator (power stage). The control ...
MATRIX mechatronics
Pressure: 1 bar - 8 bar
Flow: 60 l/min - 18,000 l/min
... electronically-controlled pressure regulator equipped with an 8-bit microcontroller. The control signal can be analogic, digital via RS232 or digital from the keyboard. It is converted into a proportional ...
MATRIX mechatronics
Pressure: -500 bar - 10,000 bar
Orifice diameter: 0 mm - 600 mm
... Product
- Type: Pressure regulator
- Brand: Hiflux
- Model: GPR Normal 3000
- Category: High Pressure Regulators
Manufacturer summary
- High-pressure
... >
Key characteristics
- Function:
Pressure: 0.1 bar - 40 bar
Orifice diameter: 6 mm - 25 mm
... 04 |
Regulator | BSP 1/2" | £21.68
AR4000-06 |
Regulator | BSP 3/4" | £25.58
AR5000-10 |
Regulator | BSP 1" | £35.58
AR2000-02-PRS-10KPA-4B | Precision
Regulator ...
Pressure: 0 psi - 8,700 psi
Orifice diameter: 0.25 in
Temperature: -20 °C - 90 °C
... Options: •panel mounting •Locked outlet pressure •Inlet and outlet pressure gauges •Nickel or chrome plating for brass body •Safety valve or bursting dise •Integrated outlet circuit purge • Dome controlled regulator ...
PROTAIS-VIGIL HYDROPNEU TECHNOLOGIC
Pressure: 0 psi - 4,300 psi
Orifice diameter: 0.75 in
Temperature: -30 °C - 130 °C
... ... Options : • Panel mounting • Locked outlet pressure • Nickel or chrome plated body • Inlet and outlet pressure gauge • Inlet fiIter • Safety valve • Dome regulator for remote control • ...
PROTAIS-VIGIL HYDROPNEU TECHNOLOGIC
Pressure: 0 psi - 4,300 psi
Orifice diameter: 0.38 in
Temperature: -20 °C - 180 °C
... FPM or PTFE or KELF) Options: • Pressure gauge • FPM diaphragm • PTFE diaphragm • Chrome plated body • Panel mounting • Safety valve or bursting discfcompulsory on serie HS60-...-P) • Inlet filter • Regulator ...
PROTAIS-VIGIL HYDROPNEU TECHNOLOGIC
the best suppliers