Pumps for maritime applications

Pressure: 4 bar
Weight: 6.2 kg

... Wall mounted pneumatic piston pump for fuel suction in accordance with ATEX directive ...

Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg

... pow­er­ful - this is our new screw pump in­no­va­tion FLEXCORE. Not only can it be in­stalled in var­i­ous ex­ist­ing pip­ing sys­tem, it also im­presses with a broad ap­pli­ca­tion range. For the start of the new ...

Flow: 8 l/min - 175 l/min
Pressure: 0 bar - 16 bar

... ACE OptiLine pump is used for a number of different fluids: Fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids, polymers, emulsions and any non-aggressive fluid with sufficient lubricating ...

Flow: 56 l/min
Power: 220 W

... EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - available: extra ...

Flow: 8 l/min
Pressure: 500 bar

... production rates. Air operated pump FX FX pumps are designed to work in harsh conditions, with working pressure up to 500bar / 50MPa.Simple design with large air passages, reducing ...

Flow: 0 m³/h - 51 m³/h
Head: max 30.0 m
Power: 5.2 ch

... Pump body: made of top quality aluminium UNI 3600, GALSI 5. Volute and impeller made of abrasion resistant G25 cast iron. Easy-to-replace cast iron wear plate with rubberized coating that is anti-abrasive and oil-resistant. Balanced ...

Flow: 2.8, 3.5 us gal/min
Pressure: 65 psi

... Install ○ Long Lifespan ○ CE/ NSF61/ ROHS certified ○ Thermal Protection Equipped (AC Motor) Applications ○ RV Camping Car ○ Marine Water System ○ Sprayer System ○ Tank Station ...

Flow: 500 m³/h
Pressure: 16, 10 bar
Head: 150 m

... Compact design with no requirement for alignment of pumps and motors. Materials : Cast Iron, Ductile Iron, Bronze, Cast Steel, SS 304, SS 316 Flange : PN10 Applications : HVAC and Cooling ...

Flow: 0 m³/h - 50 m³/h
Pressure: 8 bar
Head: 48, 65 m

... the pump-motor coupling is carried out without having to dismantle the pump body. Applications Water and wastewater treatments Surface treatments Pharmaceutical and chemical processes Lithium ...

Flow: 0 m³/h - 550 m³/h
Pressure: 10 bar - 16 bar
Head: 0 m - 105 m

... • TKF-M series pumps has designed for pumping non-abrasive and small particulars liquids. • Pump diamensions are acceptable TS EN 733 standard. • Suction and discharge flanges are suitable standard ...

Flow: 5 m³/h - 3,500 m³/h
Head: 4 m - 105 m

... • Single-stage, end-suction centrifugal volute pumps. • Main dimensions, compatible with EN 733 (DIN 24255) norm. A total of 45 designed pumps avaible in the series. • Single suction with closed impeller and thrust ...

... RMT 10 submersible pumps are ideal for removing water from trenches, ditches, manhole, industrial sumps and excavations. It has small cross section and can be lowered into areas having small ...

Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m

... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...

Flow: max 20000.0 m³/h
Pressure: max 90.0 bar
Head: max 90.0 m

... Dedge pumps are a special category of heavy duty slurry pumps that are utilized in the process of dredging. Dredging is referred to as the process of transport of underwater sediments ...

Flow: 600 m³/h
Head: 15 m
Power: 55 kW

... plants, coal slime Product Features 1. It is mainly composed of a motor, pump shell, impeller, guard plate, pump shaft, bearing seals, etc. 2. The material of the pump shell, impeller, and guard ...

Flow: 55, 70 l/min
Pressure: 8 bar
Head: 0 m - 70 m

... 1/2'' (12.7 mm) Alumınıum Body Dıaphragm Pump Maximum Capacity : 55 lt/min Fluid Inlet-Outlet : 1/2'' NPT Max. Fluid Outlet Pressure : 8 Bar Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm Material ...

Flow: 12.5 m³/h - 1,500 m³/h
Pressure: 0 Pa - 1,600,000 Pa
Head: 20 m - 125 m

... CLH vertical centrifugal pump (and disassembly type) Flow Rate Range：12.5~1500m3/h Head Range：20~125m Operation Temperature：-15℃~80℃ Matched Power：11~200kw Operation Temperature：≤1.6MPa Flow-through Material：HT200 QT450 ...

Flow: 10 l/min - 700 l/min
Pressure: 10 bar - 150 bar
Power: 0.37 kW - 90 kW

... consumption Our pumping units are used in various reverse osmosis applications such as: Environmental applications: - Industrial wastewater treatment - Leachate treatment ...

Flow: 13 m³/h - 115 m³/h
Power: 1.5 kW - 15 kW

... PG Pump Groups are assembled with PU series pumps, suitable for fuels and solvents, coupled with electric or diesel engines through gearbox or belt and pulley and housed on galvanized carbon steel bases. They can be installed ...