Remote I/O modules

The RIO40S remote I/O module, based on a CANopen architecture, ensures fast and reliable communication. Ultra compact, it can be easily integrated into any type of cabinet or electrical cabinet. Thanks to its RJ45 connectors designed for quick and easy ...

I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer, computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 ...

... The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is ...

... DeviceNet Digital Remote I/O (Terminal Block Type/Sensor Connector Type) The ARD-D series digital remote I/O units provide input/output expansion and communication for various devices using DeviceNet protocols. The ARD-D series is available in terminal ...

This product is a remote I/O model CPU unit that has RS-232C *1 and LAN interfaces in addition to four expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O modules. In addition, this product can be controlled ...

... -Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and scanning -No programming required but can be used for local control -Built ...

... Modular, Built-in, Local & Remote I/Os NEW! Ethernet-based Remote I/O Two Ethernet ports Slim modules – 12mm only Operating temperature range: -40°C to 70°C Supporting analog modules with 16bit resolution ...

... The SNAP-PAC-RCK4 mounts one SNAP PAC brain or on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O modules on the Opto ...

Modular CsCAN remote I/O platform with seamless integration, functionality, and low cost in mind. OCS-I/O is a modular I/O system for OCS offering a fieldbus network (CsCAN). It is a flexible I/O system that can be applied as a local expansion I/O or ...

The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar RS-485 Modbus RTU, ...

The I/O systems are used in centralized or decentralized expansion for control and regulation tasks. Up to 63 slave modules can be connected to one master. The cabling is carried out quickly and safely via CAT cables. Master and slave modules can be physically ...

MCM260Xs are data acquisition modules. The complete series includes six different combinations of free-programmable analog and digital I/Os. Originally conceived as data acquisition/actuation modules for Pixsys PLCs (programmable logic controllers) and ...

... As a communication interface independent of the field bus, the sensors, actuators and I/O supporting the IO-Link protocol are IO-Link slave devices, which greatly improves the reliability of the devices. M12 series classification: - 16-channel digital ...

... Connect your components quickly and easily using adio connection in the field and link your systems with our newest and wifi-enabled I / O module SPACE. The Wifi-capable control module Space with integrated antenna enables wireless networking of individual ...

To expand the I/O capability of certain RTCU products an MODBUS compatible I/O module can be connected to the product and configured using the I/O Expansion configuration functionality available in the RTCU IDE. The I/O Expansion is completely transparent ...

... M12 interface、multi-protocol bus module、16DI/DO configurable、PNP、007E31 > Integrated four Ethernet interfaces: PROFINET, Ethernet/IP, CC-Link IEF Basic、Modbus TCP > 8 ports 16 signals > Input/output configurable > Protection level: IP67 (when installed ...

... FSoE slave module for safe speed and position of one axis for further evaluation in an FSoE master unit. 14 safe digital inputs Up to 4 safe digital outputs 2 Encoder interfaces 2 Relay / clock outputs 2 Auxiliary outputs ...

The DINDxx facilitates the reporting of the status of up to 8 dry contacts or up to 8 pulse counter indices. It also allows to remotely control industrial equipments and to check their proper functioning. The readings are regularly transmitted on Sigfox ...

... I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 is an IO analog module ...

IMO's remote Input and Output modules, commonly referred to as Remote-I/O, is a selection of serial, CAN and Ethernet 24VDC powered remote modules. Available as digital and analogue input and output, thermocouple, and resistance temperature detector (RTDs) ...

... The RC-IO remote I/O device controls Stack-Lights wireless Andons. You can use it with a PLC, switches, or existing machinery. • 6 Outputs • 6 Inputs • Easy to Use These remote inputs and outputs can control Stack Light's wireless ...

The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done with a flip of ...

... C Programmable Remote I/O Module Cost-Effective programmable I/O module Support lwIP and BSD socket library and tiny web server Windows configuration utility included 1 x 10/100Mbps Ethernet interface 1 x Isolation RS-485 port, 1 Serial Console ...

The DIO021E is a remote I/O with 8 digital inputs, 2 digital outputs and 4 analog inputs, that is controlled via an Ethernet interface. All digital inputs can be used as PWM or event counter. The two digital outputs are isolated and allow bidirectional ...

... 5 Channels Digital Input and 6 Channels Relay Output Remote I/O Module ● 5 channels Digital input ● 4 channels Power Relay output and 2 channels Signal Relay output ● All Digital input channels can be used as 32 bit counters ● Support over voltage ...

The IA-3116-E is most reliable Industrial Ethernet IP Relay Controller and Remote Digital Status monitor. This Industrial Grade module is CE and FCC approved, designed to operate on factory-floor in harsh noisy EMI/RFI Environment. The IA-3116-E includes ...

ZLAN6002 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on RS485. The remote IO controller can conveniently connect to 485 bus to realize accessing RS485. ZLAN6002 is the ...

... NI34xx The NI34xx series is a smart controller product with an embedded 4G cellular modem. The intelligent software and ultra-compact portable form factor design make it an ideal solution for a variety of industrial applications like field device monitoring, ...

... The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and 4 digital inputs ...

Together with the central computers, the EN 50155 qualified input / output modules make it possible to build complete train control control (TCMS) architectures. These acquisition and control modules are based on a generic platform: the “Basic Remote”. ...

I/O remote extension modules can provide customers with more choices and more topology.

The module has a compact aluminium housing and offers the possibility for top hat rail mounting. The interfaces are quickly and con­ve­nien­tly avail­able on the front panel. Using the 3-wire connection technology, all sensors can be connected directly ...

... Standard variant transmitting the following signals: Single-link DVI-D PS/2 + USB keyboard/mouse Audio (Line In / Line Out) The communication with Wacom Intuos3 or 4® tablets is supported. ...

The MxxxT Series Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet ...

Our remote I/O expansion units communicate with Modbus TCP/RTU and IEC 61850 GOOSE, allowing to extend and distribute the acquisition and command capabilities of any master device. We offer flexible I/O board configurations to fulfill any application ...

... W-M1B501 | 16-Ch Digital Input / 16-Ch Digital Output Module 16-Ch Digital Input / 16-Ch Digital Output Dry / Wet Contact Input Resistance 10KΩ Over-Voltage Protection 70 VDC NPN Output Type Normal Output Current 500mA per Channel Wolf General ...

... Modbus TCP Ethernet Remote IO Module (2DI+2DO+2AI+RJ45+RS485) The M100T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance ...

Profibus is also a popular modern industry Fieldbus developed on RS485, according to the ISO / OSI reference model standard, becoming a German standard when published in DIN19245 in April 1991. With the maximum transfer rate of 12Mbps / 100 meters and ...

... Two serial ports, 2 relay and 4 digital outputs, 4 digital and 4 digital + analog inputs and Dallas 1-wire support, UL listed Universal, programmable I/O device server with web server, Modbus/TCP and SNMP support. Serial ports, analog and digital I/O, ...

... Belden adds a new I/O module to Lumberg Automation™ LioN-Link decentralized I/O fieldbus system for safety applications The new Lumberg Automation™ I/O module (0942 UEM 612), which meets the requirements of protection class IP67, allows safety-related ...